Digital Concrete (2016-10)¶
Opportunities and Challenges
10.21809/rilemtechlett.2016.16
, , , , , , , , , ,
Journal Article - RILEM Technical Letters, Vol. 1, pp. 67-74
Abstract
Digital fabrication has been termed the “third industrial revolution” in recent years, and promises to revolutionize the construction industry with the potential of freeform architecture, less material waste, reduced construction costs, and increased worker safety. Digital fabrication techniques and cementitious materials have only intersected in a significant way within recent years. In this letter, we review the methods of digital fabrication with concrete, including 3D printing, under the encompassing term “digital concrete”, identifying major challenges for concrete technology within this field. We additionally provide an analysis of layered extrusion, the most popular digital fabrication technique in concrete technology, identifying the importance of hydration control in its implementation.
¶
11 References
- Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
Freeform Construction:
Mega-Scale Rapid Manufacturing for Construction - Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Hack Norman, Lauer Willi (2014-04)
Mesh Mould:
Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
Complex Concrete Structures:
Merging Existing Casting Techniques with Digital Fabrication - Pegna Joseph (1997-02)
Exploratory Investigation of Solid Freeform Construction - Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
482 Citations
- Zhang Xin, Xu Xinglong, Liu Xianda, Sun Junbo et al. (2026-01)
Enhancing Electromagnetic Wave Absorption in 3D-Printed Concrete with Superabsorbent Polymers for High Performance - Costa Gabriel, Maas Pyetra, Doerner Gabriel, Nazário Samara et al. (2026-01)
Reducing the Cement Content in 3D Concrete Printing Mixtures Through Porcelain Polishing Residue Incorporation - Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design - Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements - Deetman Arjen, Suiker Akke (2025-12)
Characterization of Early-Age Elastic–Plastic Properties of 3D Printed Materials Using Indentation Testing - Gümrük Idil, Schröder Torsten, Wolfs Robert, Salet Theo (2025-11)
3DCP-CI:
Developing a Circularity Indicator for Assessing 3DConcrete Printed Architectural Designs - Türk Ayşe, Türk Furkan, Edebali Serpil, Keskin Ülkü (2025-11)
3D Printable Mortars with Green Materials:
Sustainable Solutions with Nanocellulose - Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation - Ataei Sarah, Jafari Amirhosein (2025-10)
Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
A Case Study Analysis - Jamjala Siva, Thulasirangan Lakshmidevi Manivannan, Reddy K., Kafle Bidur et al. (2025-10)
A Critical Review on Synergistic Integration of Nanomaterials in 3D-Printed Concrete:
Rheology to Microstructure and Eco-Functionality - Verma Shilpi, Parghi Anant (2025-10)
Machine Learning-Based Prediction of Compressive Strength in Additive Manufacturing of Concrete Technology - Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-10)
Adaptive Velocity Compensation for Optimal 3D Concrete Printing in Uncontrolled Environments - Tarhan İsmail, Tarhan Yeşim (2025-09)
Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
Experimental Mix Design and Numerical Structural Assessment - Mawas Karam, Maboudi Mehdi, Gerke Markus (2025-09)
A Review on Geometry and Surface Inspection in 3D Concrete Printing - Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
Influence of Process Parameters on 3D Concrete Printing:
A Step Towards Standardized Approaches - Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete - Gerges Isabelle, Farraj Faten, Youssef Nicolas, Antczak Emmanuel et al. (2025-07)
Methodologies to Design Optimum 3D Printable Mortar Mix:
A Review - Goel Devansh, Kore Sudarshan (2025-07)
Mapping the Bibliometric Progression of 3D Concrete Printing:
A Concise Review - Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2025-07)
Squeeze Test:
A Toolkit for Assessing the Printability of Stiff Cement-Based Materials. - Cao Yifang, Shen Luming, Mukherjee Abhijit, Abbas Ali et al. (2025-07)
Improvement of the Interlayer Bonding Strength in a 3D-Printed Mortar with Biocement Sprayed into Interlayer Surfaces - Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
Part II: Moisture and Heat - Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers - Jacquet Yohan, Kawashima Shiho, Spangenberg Jon (2025-06)
Unveiling the Structural Build-up 3D Printable Cement-Based Materials:
From Small Amplitude Oscillatory Shear (SAOS) To Extensional (SAOE) Rheological Workflows - Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC) - Girskas Giedrius, Kligys Modestas (2025-06)
3D Concrete Printing Review:
Equipment, Materials, Mix Design, and Properties - Makul Natt (2025-06)
3D Concrete Printing - Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
An Overview of 3D Printed Concrete for Building Structures:
Material Properties, Sustainability, Future Opportunities, and Challenges - Demirbaş Ali, Tuğluca Merve, Şahin Oğuzhan, İlcan Hüseyin et al. (2025-05)
A Comprehensive Study on the Valorization of Recycled Concrete Aggregates in 3D-Printable Cementitious Systems - Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2025-05)
A Comparative Study on the Effectiveness of Fly Ash and Blast Furnace Slag as Partial Cement Substitution in 3D Printable Concrete - Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests - Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes - Bayat Hamid, Kashani Alireza (2025-02)
Reducing Material and Energy Consumption in Single-Story Buildings Through 3D-Printed Wall Designs - Das Arnesh, Wenger Cedric, Walpen Lukas, Flatt Robert (2025-02)
Early-Age Hydration of Accelerated Low-Carbon Cements for Digital Fabrication - Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
Part I: Geometry - Park Ji-seul, Jeong Seung-Su, Hong Seungkee, Lee Seohyung et al. (2025-02)
Mechanical Modeling for Prediction of Structural Stability of Cylindrical Structures During 3D Concrete Printing - Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates - Sando Mona, Stephan Dietmar (2025-02)
The Role of Mixing Sequence in Shaping the 3D-Printability of Geopolymers - Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance - Do Duc, Diab Zeinab, Rémond Sébastien, Hoxha Dashnor (2025-01)
Numerical Simulation-Tools for 3D Printing - Kuzmenko Kateryna, Roux Charlotte, Féraille Adélaïde (2025-01)
Environmental Impact of 3D Concrete Printing - Perrot Arnaud, Jacquet Yohan (2025-01)
3D Concrete Printing by Extrusion and Filament-Deposition - Perrot Arnaud, Jacquet Yohan, Amziane Sofiane (2025-01)
3D Concrete Printing - Hanžič Lucija, Štefančič Mateja, Šter Katarina, Zalar Serjun Vesna et al. (2025-01)
Collision Milling of Oil Shale Ash as Constituent Pretreatment in Concrete 3D Printing - Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
From Local Earth to Modern Structures:
A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction - Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
A Review - Tarhan Yeşim, Tarhan İsmail, Şahin Remzi (2024-12)
Comprehensive Review of Binder Matrices in 3D Printing Construction:
Rheological Perspectives - Gurunandan M., Mala Hiranya, Nanthagopalan Prakash (2024-12)
Effect of Water-to-Binder, Aggregate-to-Binder-Ratio and Admixtures on Printability and Mechanical Properties of 3D Printable Mortar Mixtures - Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material - Andrade Rodrigo, Mendoza Reales Oscar, Carvalho Gonzaga e Silva Ana, Fairbairn Eduardo et al. (2024-12)
Thermal Behavior of Air-Fluid in Triangular Cavities of 3D Printed Concrete Walls - Santos da Mata Gomes Daniela, Rocutan Melina, Pereira Lucas, Motezuki Fabio et al. (2024-12)
Simulation of 3D Concrete Printing Using an Implicit Formulation of the Moving Particle Semi-Implicit Method - Wang Lei, Nerella Venkatesh, Li Dianmo, Zhang Yuying et al. (2024-11)
Biochar-Augmented Climate-Positive 3D Printable Concrete - Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2024-11)
Effect of Hydroxypropyl-Methylcellulose and Aggregate Volume on Fresh and Hardened Properties of 3D Printable Concrete - Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
The Rise of Aerial Additive Manufacturing in Construction:
A Review of Material Advancements - Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
3D Constructing:
Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation - Subramaniam Kolluru, Paritala Spandana, Kulkarni Omkar, Thakur Manideep (2024-09)
Fracture in 3D Printed Concrete Beams:
Deflection and Penetration of Impinging Cracks at Layer Interfaces - Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam - Andreou Vasilis, Kontovourkis Odysseas (2024-09)
Formwork-Optimization for Complex 3D Concrete Printing:
A Unified Theoretical, Digital, and Experimental Framework - Tarhan Yeşim, Tarhan İsmail, Jacquet Yohan, Perrot Arnaud (2024-09)
Mechanical Behavior of 3D Printed and Textile-Reinforced Eco-Friendly Composites - Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
Instrumentation of the Extruder Nozzle Using Load Cells:
Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials - Canavarro Cavalcante Tiago, Castrillon Fernandez Letitia, Toledo Filho Romildo, Mendoza Reales Oscar (2024-09)
3D Printable Mortars with Different Recycled Concrete Powders as Fillers - Harbouz Ilhame, Alam Syed, Loukili Ahmed (2024-09)
Influence of Printing Parameters on Early-Age Shrinkage in 3D Printed Mortar - Meibodi Mania, Lin Yuxin, Chen Hao (2024-09)
Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures - Oliveira Romano Roberto, Lima Francisco, Mesquita José, Pan Eduardo et al. (2024-09)
Extended Rheological Characterization as a Tool for Low-Binder 3D Printing Compositions - Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2024-09)
Challenging the Limits of Fluid FEM Modelling in 3D Concrete Printing - Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Bundur Zeynep, Bebek Özkan (2024-09)
Bio-Based Additives to Improve the Rheology of High-Volume Fly-Ash Cement-Based Mortar for 3D Printing - Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology. - Zhang Qing, Bégaud Fabienne, Khatib Omar (2024-09)
Quantitative Comparison of Elastic Modulus Measurement Techniques in Early-Age 3D Printable Mortar:
Insights from Compression, Ultrasonic, and Microindentation Methods - Prihar Arjun, Gupta Shashank, Esmaeeli Hadi, Moini Mohamadreza (2024-08)
Tough Double-Bouligand Architected Concrete Enabled by Robotic Additive Manufacturing - Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
A Review and Bibliometric Analysis - Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing - Bolhassani Damon, Yavartanoo Fahimeh, Tapia Javier, Akbarzadeh Masoud et al. (2024-08)
The Effect of Post-Tensioning on the Behavior of Small-Scale 3D Printed Concrete Beams - Licen Jurij, Chen Taole (2024-08)
Fabrication-Aware Design for 3DCP Shells Using Genetic Optimization - Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
Enhancing Structural Efficiency with Digital Concrete:
Principles, Opportunities and Case Studies - Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
Aluminate 2K Systems in Digital Concrete:
Process, Design, Chemistry, and Outlook - Aghaee Kamran, Li Linfei, Roshan Alireza, Namakiaraghi Parsa (2024-08)
Additive Manufacturing Evolution in Construction:
From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications - Dvorkin Leonid, Marchuk Vitaliy, Makarenko Ruslan (2024-08)
Mechanochemical-Activated Fly-Ash Concrete Suitable for 3D Printing - Goidea Ana, Popescu Mariana, Johansson Anton, Andreén David (2024-07)
Algorithmic Modeling of Functionally Graded Metamaterials in 3D Printed Building Envelopes - Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2024-07)
Granular Materials for 3D Printing of Construction Components and Structures - Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete - Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
Selection of Digital Fabrication Technique in the Construction Industry:
A Multi-Criteria Decision-Making Approach - Ghaffar Seyed, Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen (2024-06)
Emerging Resources for the Development of Low-Carbon Cementitious Composites for 3D Printing Applications - Seifan Mostafa (2024-06)
Sustainable Three-Dimensional Printing Concrete:
Advances, Challenges, and Future Direction - Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing - Giwa Ilerioluwa, Dempsey Mary, Fiske Michael, Kazemian Ali (2024-06)
3D Printed Sulfur-Regolith Concrete Performance Evaluation for Waterless Extraterrestrial Robotic Construction - Gu Yucun, Khayat Kamal (2024-06)
Effect of Superabsorbent Polymer on 3D Printing Characteristics as Rheology-Modified-Agent - To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings - Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing - Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods - Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing - Gu Yucun, Khayat Kamal (2024-05)
Extrudability Window and Off-Line Test-Methods to Predict Buildability of 3D Printing Concrete - Taqa Ala, Mohsen Mohamed, Aburumman Mervat, Naji Khalid et al. (2024-05)
Nano-Fly-Ash and Clay for 3D Printing Concrete Buildings:
A Fundamental Study of Rheological, Mechanical and Microstructural Properties - Gu Yucun, Zheng Shuyi, Ma Hongyan, Long Wujian et al. (2024-05)
Effect of Absorption Kinetics of Superabsorbent Polymers on Printability and Inter-Layer Bond of 3D Printing Concrete - An Dong, Zhang Yixia, Yang Chunhui (2024-05)
Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
A Review - Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall - Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
Internal Topology-Optimization of 3D Printed Concrete Structures:
A Method for Enhanced Performance and Material-Efficiency - Cheng Hanbin, Radlińska Aleksandra, Hilman Michael, Liu Feihong et al. (2024-05)
Modeling Concrete-Deposition via 3D Printing Using Reproducing Kernel-Particle-Method - Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2024-05)
Influence of Recycled Concrete-Powder on Rheology of Printable Cement-Based Matrixes - Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Tamimi Adil, Trepci Esra et al. (2024-04)
Towards Innovative and Sustainable Buildings:
A Comprehensive Review of 3D Printing in Construction - Yang Liuhua, Gao Yang, Chen Hui, Jiao Huazhe et al. (2024-04)
3D Printing Concrete Technology from a Rheology Perspective:
A Review - Rangel Carolina, Guimarães Ana, Salet Theo, Lucas Sandra (2024-03)
3D Printing Lightweight Mortars with Cork to Improve Thermal Efficiency in Buildings - Dams Barrie, Chen Binling, Kaya Yusuf, Orr Lachlan et al. (2024-03)
Fresh Properties and Autonomous Deposition of Pseudoplastic Cementitious Mortars for Aerial Additive Manufacturing - Ivaniuk Egor, Mechtcherine Viktor (2024-03)
Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing - Alhussain Ali, Duarte José, Brown Nathan (2024-02)
Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing - İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
A Comprehensive Study on Operational and Material Parameters - Nan Cristina, Vigorito Alessio (2024-02)
Exploring 3D Concrete Printing of Lattice Structures on Robotically-Shaped Sand Formwork for Circular Futures - Bhooshan Shajay, Dell’Endice Alessandro, Ranaudo Francesco, Mele Tom et al. (2024-02)
Unreinforced Concrete Masonry for Circular Construction - Isaac Geoff, Nicholas Paul, Paul Gavin, Pietroni Nico et al. (2024-02)
Automated Shotcrete:
A More Sustainable Construction Technology - Keita Emmanuel, Perrot Arnaud (2024-02)
Processing of Earth-Based Materials:
Current Situation and Challenges Ahead - Delavar Mohammad, Chen H., Sideris Petros (2024-01)
Analysis and Design of 3D Printed Reinforced Concrete Walls Under In-Plane Quasi-Static Loading - Prihar Arjun, Garlock Maria, Najmeddine Aimane, Moini Mohamadreza (2024-01)
Mechanical Performance of Sinusoidally Architected Concrete Enabled by Robotic Additive Manufacturing - Moini Mohamadreza (2024-01)
Perspectives in Architected Infrastructure Materials - Fasihi Ali, Libre Nicolas (2024-01)
From Pumping to Deposition:
A Comprehensive Review of Test-Methods for Characterizing Concrete-Printability - Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures - Özalp Fatih (2024-01)
Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete - Böhler David, Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
Shotcrete 3D Printing:
Effect of Material‐Process-Interaction on the Global and Local Material Density - Freund Niklas, David Martin, Böhler David, Mai (née Dressler) Inka et al. (2023-12)
Shotcrete 3D Printing:
Interaction of Nozzle Geometry, Homogeneity and Hardened Concrete Properties - Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing - Warsi Syed, Srinivas Dodda, Panda Biranchi, Biswas Pankaj (2023-12)
Investigating the Impact of Coarse Aggregate Dosage on the Mechanical Performance of 3D Printable Concrete - Ambily Parukutty, Rajendran Neeraja, Kaliyavaradhan Senthil (2023-11)
Mix-Design, Optimization and Performance-Evaluation of Extrusion-Based 3D Printable Concrete - Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement - Šána Vladimír, Litoš Jiří, Kolář Karel (2023-10)
Mechanical Properties of the New Cement Composite Mixture Appropriate for Robotic Processing - Thib Raghed, Belayachi Naima, Bouarroudj Mohamed, Bulteel David et al. (2023-10)
A Methodology for Designing 3D Printable Mortar Based on Recycled Sand - Wang Shih-Yuan, Liong Sze-Teng, Gan Y., Sheng Yu-Ting (2023-10)
Cost-Effective Concrete Fabrication for Large Irregularly Shaped Architectural Structures - Şahin Hatice, Mardani Ali (2023-10)
How Does Rheological Behavior Affect the Inter-Layer Bonding Strength of 3DPC Mixtures? - Curbach Manfred, Hegger Josef, Bielak Jan, Schmidt Christopher et al. (2023-10)
New Perspectives on Carbon Reinforced Concrete Structures:
Why New Composites Need New Design-Strategies - Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites - Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
From Analytical Modelling to Numerical Simulation - Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2023-09)
Automatic Detection and Isolation of Filament-Width-Deviation During 3D Printing of Recycled Construction-Material - Živković Milijana, Žujović Maša, Milošević Jelena (2023-09)
Architectural 3D Printed Structures Created Using Artificial Intelligence:
A Review of Techniques and Applications - Bayat Hamid, Kashani Alireza (2023-09)
Analysis of Rheological Properties and Printability of a 3D Printing Mortar Containing Silica-Fume, Hydrated Lime, and Blast-Furnace-Slag - Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete - Ji Yameng, Poullain Philippe, Leklou Ali (2023-09)
The Selection and Design of Earthen Materials for 3D Printing - Dörrie Robin, Freund Niklas, Herrmann Eric, Baghdadi Abtin et al. (2023-09)
Automated Force-Flow-Oriented Reinforcement Integration for Shotcrete 3D Printing - Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-08)
3D Printable Strain-Hardening Cementitious Composites (3DP-SHCC):
Tailoring Fresh and Hardened State Properties - Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction - Geffrault Anatole, Bessaies-Bey Hela, Roussel Nicolas, Coussot Philippe (2023-08)
Printing by Yield-Stress Fluid-Shaping - Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-08)
Nano-Modified Materials for New Construction Technologies:
Self-Compacting and 3D Printing - Mogra Mihir, Asaf Ofer, Sprecher Aaron, Amir Oded (2023-08)
Design-Optimization of 3D Printed Concrete Elements Considering Buildability - Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials - Chougan Mehdi, Kheetan Mazen, Ghaffar Seyed (2023-07)
Additive Manufacturing and the Construction Industry - Ghosh Debalina, Anleu Paula, Pape Yann, Ma Zhonggoue (2023-07)
Effect of Inter-Layer-Time-Lapse and Workability-Retention on Printed Concrete Performance - Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method - Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
Review of Advances in 3D Printing Technology of Cementitious Materials:
Key Printing Parameters and Properties Characterization - Ghantous Rita, Evseeva Anastasiia, Dickey Brandon, Gupta Shashank et al. (2023-07)
Examining Effect of Printing-Directionality on Freezing-and-Thawing Response of Three-Dimensional-Printed Cement-Paste - Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials - Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry - Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
Automatic Construction, Digital Rebuilding, and Seismic Performance - Fairbairn Eduardo, Santos Larissa, Mendoza Reales Oscar, Farias Marina et al. (2023-06)
New Conceptions and Constructive Methods for Pumped Storage Hydropower-Plants - Munemo Rue, Kruger Jacques, Zijl Gideon (2023-06)
Improving Inter-Layer Bond in 3D Printed Concrete Through Induced Thermo-Hydrokinetics - Anleu Paula, Pape Yann, Chen Qiyi, Advincula Rigoberto et al. (2023-06)
An Innovative Carbonated Cementitious Material and Its Printability and Carbon Mineralization Capacity - Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
Qualitative Technology Evaluation of Digital Fabrication with Concrete:
Conceptual Framework and Scoreboard - Heywood Kate, Nicholas Paul (2023-06)
Sustainability and 3D Concrete Printing:
Identifying a Need for a More Holistic Approach to Assessing Environmental Impacts - Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement - Lin Che, Mattei Gabriele, Cheibas Ina, Du Chaoyu et al. (2023-05)
PneuPrint:
3D Printing on Inflatables - Leschok Matthias, Cheibas Ina, Piccioni Valeria, Seshadri Bharath et al. (2023-05)
3D Printing Facades:
Design, Fabrication, and Assessment Methods - Fan Dingqiang, Zhu Jinyun, Fan Mengxin, Lu Jianxian et al. (2023-04)
Intelligent Design and Manufacturing of Ultra-High-Performance Concrete:
A Review - Gupta Shashank, Esmaeeli Hadi, Prihar Arjun, Ghantous Rita et al. (2023-04)
Fracture- and Transport-Analysis of Heterogeneous 3D Printed Lamellar Cementitious Materials - Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
3D Printing of Limestone-Calcined-Clay-Cement:
A Review of Its Potential Implementation in the Construction-Industry - Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-04)
Interfacial Weakness Criterion by Indentation in 3D Printed Concrete - Salam Mohammad Abdul, Biernacki Joseph (2023-04)
2D Stationary Computational Printing of Cement-Based Pastes with Time-Dependent Rheology - Panda Biranchi, Tran Jonathan (2023-03)
Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials - Tamimi Adil, Alqamish Habib, Khaldoune Ahlam, Alhaidary Haidar et al. (2023-03)
Framework of 3D Concrete Printing Potential and Challenges - Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
From Transportation to Fabrication - Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete - Huber Tobias, Burger Joris, Mata-Falcón Jaime, Kaufmann Walter (2023-03)
Structural Design and Testing of Material-Optimized Ribbed RC Slabs with 3D Printed Formwork - Nair Avinash, Aditya S., Adarsh R., Nandan M. et al. (2023-03)
Additive Manufacturing of Concrete:
Challenges and Opportunities - Ishida Takato, Nakada Kiyofumi (2023-02)
Review of Rheology in Cement-Based Materials and Its Application to 3D Printing Using Concrete - Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions - Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
A Review - Baigarina Akerke, Shehab Essam, Ali Md. (2023-02)
Construction 3D Printing:
A Critical Review and Future Research-Directions - Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
A Case Study on Water Tanks - Ahmed Ghafur (2023-01)
A Review of 3D Concrete Printing:
Materials and Process Characterization, Economic Considerations and Environmental Sustainability - Teixeira João, Zuazua-Ros Amaia, Jesus Manuel, Rangel Bárbara et al. (2023-01)
How 3DPC Will Transform Architectural Design - Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
Engineering, Environmental and Economic Feasibility - Volpe Stelladriana, Sangiorgio Valentino, Fiorito Francesco, Varum Humberto (2022-12)
Overview of 3D Construction Printing and Future Perspectives:
A Review of Technology, Companies and Research Progression - Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
Modelling of 3D Concrete Printing Process:
A Perspective on Material and Structural Simulations - Rubin Ariane, Quintanilha Lucas, Repette Wellington (2022-11)
Influence of Structuration-Rate, with Hydration-Accelerating Admixture, on the Physical and Mechanical Properties of Concrete for 3D Printing - Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features - Puzatova (nee Sharanova) Anastasiia, Shakor Pshtiwan, Laghi Vittoria, Dmitrieva Maria (2022-11)
Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer:
A Review - Das Arnesh, Reiter Lex, Mantellato Sara, Flatt Robert (2022-10)
Early-Age Rheology and Hydration-Control of Ternary Binders for 3D Printing Applications - Kalthoff Matthias, Raupach Michael, Matschei Thomas (2022-09)
Investigation of Rheological Test-Methods for the Suitability of Mortars for Manufacturing of Textile-Reinforced Concrete Using a Laboratory Mortar-Extruder:
LabMorTex - Mehdizadeh Samim, Zimmermann Adrian, Tessmann Oliver (2022-09)
RotoColumn:
A Continuous Digital Fabrication Framework for Casting Large-Scale Linear Concrete Hollow Elements - Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2022-09)
Aerial Additive Manufacturing with Multiple Autonomous Robots - Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone - Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
3D Concrete Printing:
Lattice Modeling of Structural Failure considering Damage and Deformed Geometry - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2022-08)
Rheometry for Concrete 3D Printing:
A Review and an Experimental Comparison - Barjuei Erfan, Courteille Eric, Rangeard Damien, Marie F. et al. (2022-07)
Real-Time Vision-Based Control of Industrial Manipulators for Layer-Width Setting in Concrete 3D Printing Applications - Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials - Chang Ze, Zhang Hongzhi, Liang Minfei, Schlangen Erik et al. (2022-07)
Numerical Simulation of Elastic Buckling in 3D Concrete Printing Using the Lattice-Model with Geometric Non-Linearity - Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar - Farahbakhsh Mehdi, Rybkowski Zofia, Zakira Umme, Kalantar Negar et al. (2022-07)
Impact of Robotic 3D Printing Process Parameters on Inter-Layer Bond Strength - Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar? - Ribeiro João, Figueiredo Bruno, Cruz Paulo, Camões Aires (2022-07)
Concrete AM:
An Insight into the Control of Main Parameters - Fairbairn Eduardo, Santos Larissa, Farias Marina, Mendoza Reales Oscar (2022-07)
Numerical Modeling of New Conceptions of 3D Printed Concrete Structures for Pumped Storage Hydropower - Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2022-07)
Numerical Modeling of 3D Concrete Printing Wall Structure to Reliably Estimate the Failure Mechanisms - Das Arnesh, Aguilar Sanchez Asel, Wangler Timothy, Flatt Robert (2022-06)
Freeze-Thaw-Performance of 3D Printed Concrete:
Influence of Interfaces - Rusike Rutendo, Sataya Michael, Marsh Alastair, Cavalaro Sergio et al. (2022-06)
Accelerating Early-Age Properties of Ultra-Low Clinker Cements for Extrusion-Based 3D Printing - Hojati Maryam, Memari Ali, Zahabi Mehrzad, Wu Zhengyu et al. (2022-06)
Barbed-Wire Reinforcement for 3D Concrete Printing - Lee Jin, Kim Jae (2022-06)
Matric-Suction and Its Effect on the Shape Stability of 3D Printed Concrete - Dörfler Kathrin, Dielemans Gido, Lachmayer Lukas, Recker Tobias et al. (2022-06)
Additive Manufacturing Using Mobile Robots:
Opportunities and Challenges for Building Construction - Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
Drying Behavior of 3D Printed Cementitious Pastes Containing Cellulose-Nano-Crystals - Mohammad Abdul, Biernacki Joseph (2022-06)
2D Stationary Computational Printing of Cement-Based Pastes - Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
A Review - Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
Assessing the Fresh Properties of Printable Cement-Based Materials:
High-Potential Tests for Quality-Control - Lachmayer Lukas, Recker Tobias, Dielemans Gido, Dörfler Kathrin et al. (2022-05)
Autonomous Sensing and Localization of a Mobile Robot for Multi-Step Additive Manufacturing in Construction - Flatt Robert, Wangler Timothy (2022-05)
On Sustainability and Digital Fabrication with Concrete - Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
Additive Digital Casting:
From Lab to Industry - Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Kamile, Felekoğlu Burak (2022-05)
Effect of Fiber-Reinforcement on Extrudability and Buildability of Mineral-Additive-Modified Portland-Cement Mortars:
A Rheometer-Based Simulation-Analysis - Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Burak (2022-04)
A Comprehensive Review on Fresh State Rheological Properties of Extrusion-Mortars Designed for 3D Printing Applications - Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2022-04)
3D Printing of Cement-Based Materials with Adapted Buildability - Prem Prabhat, Ravichandran Darssni, Kaliyavaradhan Senthil, Ambily Parukutty (2022-04)
Comparative Evaluation of Rheological Models for 3D Printable Concrete - Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites - Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar - Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete - Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
3D Printed Formwork for Concrete:
State of the Art, Opportunities, Challenges, and Applications - Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2022-04)
Slow Penetration for Characterizing Concrete for Digital Fabrication - Rollakanti Chiranjeevi, Prasad C. (2022-04)
Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
A State of the Art Review - Ruffray Nicolas, Reiter Lex, Flatt Robert (2022-04)
Overcoming Environmental Stress-Cracking of FDM 3D Printed Formwork for Counter-Pressure Casting of Concrete - Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers - Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
Effect of Processing on the Air-Void System of 3D Printed Concrete - Ulubeyli Serdar (2022-03)
Lunar Shelter Construction Issues:
The State of the Art Towards 3D Printing Technologies - Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
A Chemical Process Engineering Look at Digital Concrete Processes:
Critical Step Design, In-Line Mixing, and Scale-Up - Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
3D Concrete Printing Modelling of Thin-Walled Structures - İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing - Ivanova Irina, Ivaniuk Egor, Bisetti Sameercharan, Nerella Venkatesh et al. (2022-03)
Comparison Between Methods for Indirect Assessment of Buildability in Fresh 3D Printed Mortar and Concrete - Filho Fernando, Chen Yu, Çopuroğlu Oğuzhan (2022-03)
Nano-Modification in Digital Manufacturing of Cementitious Composites - Sayegh Sameh, Romdhane Lotfi, Manjikian Solair (2022-03)
A Critical Review of 3D Printing in Construction:
Benefits, Challenges, and Risks - Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
A Perspective from Application in Additive Manufacturing - Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods - Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method - Zhong Hui, Zhang Mingzhong (2022-02)
3D Printing Geopolymers:
A Review - Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
Recent Developments and Challenges of 3D Printed Construction:
A Review of Research Fronts - Heever Marchant, Plessis Anton, Bester Frederick, Kruger Jacques et al. (2022-02)
A Mechanistic Evaluation Relating Microstructural Morphology to a Modified Mohr-Griffith Compression-Shear Constitutive-Model for 3D Printed Concrete - Eugenin Claudia, Navarrete Iván, Brevis Wernher, Lopez Mauricio (2022-02)
Air-Bubbles as an Admixture for Printable Concrete:
A Review of the Rheological Effect of Entrained Air - Meisel Nicholas, Watson Nathan, Bilén Sven, Duarte José et al. (2022-02)
Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic-Arm-Deposition - Weger Daniel, Gehlen Christoph, Korte Waldemar, Meyer-Brötz Fabian et al. (2022-02)
Building Rethought:
3D Concrete Printing in Building Practice - Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution - Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-02)
Influence of Nano-Clay on the Fresh and Rheological Behavior of 3D Printing Mortar - Ayegba Blessing, Egbe King-James, Nazar Ali, Huang Mingzhi et al. (2022-01)
Resource Efficiency and Thermal Comfort of 3D Printable Concrete Building Envelopes Optimized by Performance Enhancing Insulation:
A Numerical Study - Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction - Vasilić Ksenija, Hack Norman, Kloft Harald, Lowke Dirk et al. (2022-01)
Digitale Fertigung im Betonbau - Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
Digital Fabrication with Cement-Based Materials:
Underlying Physics - Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
Properties and Testing of Printed Cement-Based Materials in Hardened State - Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
Printable Cement-Based Materials:
Fresh Properties Measurements and Control - Yang Huashan, Che Yujun (2022-01)
Recycling of Aggregate Micro-Fines as a Partial Replacement for Fly-Ash in 3D Printing Cementitious Materials - Wu Zhengyu, Memari Ali, Duarte José (2022-01)
State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete - Castano-Alvarez Ruben, Calderon-Uriszar-Aldaca Iñigo, Marcos Ignacio (2021-12)
Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening - Amran Mugahed, Abdelgader Hakim, Onaizi Ali, Fediuk Roman et al. (2021-12)
3D Printable Alkali-Activated Concretes for Building Applications:
A Critical Review - Jones Scott, Hipp Julie, Allen Andrew, Gagnon Cedric (2021-12)
Rheology and Microstructure Development of Hydrating-Tricalcium-Silicate:
Implications for Additive Manufacturing in Construction - Lee Hojae, Seo Eun-A, Kim Won-Woo, Yang Jun-Mo et al. (2021-12)
X-Ray CT Analysis of the Cross-Section of a 3D Printed Deformed Layer - Weger Daniel, Stengel Thorsten, Gehlen Christoph, Maciejewski Yannick et al. (2021-12)
Approval for the Construction of the First 3D Printed Detached House in Germany:
Significance of Large-Scale Element Testing - Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements - Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing - Freund Niklas, Lowke Dirk (2021-11)
Inter-Layer Reinforcement in Shotcrete 3D Printing - Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
Concepts and Initial Case Studies - Ivaniuk Egor, Müller Steffen, Neef Tobias, Mechtcherine Viktor (2021-11)
Strategies for Integrating Reinforcement Into 3D Concrete Printing at the TU Dresden - Suiker Akke (2021-11)
Effect of Accelerated Curing and Layer Deformations on Structural Failure During Extrusion-Based 3D Printing - Douba AlaEddin, Kawashima Shiho (2021-11)
Use of Nano-Clays and Methylcellulose to Tailor Rheology for Three-Dimensional Concrete Printing - Nespor B., Bohac M., Nejedlik M. (2021-11)
Development of Rapid-Set Mortar for Additive Manufacturing - Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures - Rodriguez Fabian, Olek Jan, Moini Mohamadreza, Zavattieri Pablo et al. (2021-11)
Linking Solids Content and Flow Properties of Mortars to Their Three-Dimensional Printing Characteristics - Graser Konrad, Kahlert Aniko, Hall Daniel (2021-10)
DFAB HOUSE:
Implications of a Building-Scale Demonstrator for Adoption of Digital Fabrication in AEC - Frangez Valens, Lloret-Fritschi Ena, Taha Nizar, Gramazio Fabio et al. (2021-10)
Depth-Camera-Based Rebar Detection and Digital Reconstruction for Robotic Concrete Spraying - Mai (née Dressler) Inka, Brohmann Leon, Freund Niklas, Gantner Stefan et al. (2021-10)
Large Particle 3D Concrete Printing:
A Green and Viable Solution - Hou Shaodan, Xiao Jianzhuang, Duan Zhenhua, Ma Guowei (2021-10)
Fresh Properties of 3D Printed Mortar with Recycled Powder - Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams - Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing - Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
Digital Concrete Construction by Means of Additive Processes:
State of the Art and Research Needs - Baghdadi Abtin, Dörrie Robin, Kloft Harald (2021-08)
New Calculation Approach for Selecting and Orienting the Reinforcing Material for Robotic Concrete Manufacturing - Che Yujun, Tang Shengwen, Yang Huashan, Li Weiwei et al. (2021-08)
Influences of Air-Voids on the Performance of 3D Printing Cementitious Materials - Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete - Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials - Lowke Dirk, Vandenberg Aileen, Pierre Alexandre, Thomas Amaury et al. (2021-07)
Injection 3D Concrete Printing in a Carrier Liquid:
Underlying Physics and Applications to Lightweight Space Frame Structures - Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
From Analytical Methods to Numerical Simulations:
A Process Engineering Toolbox for 3D Concrete Printing - Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review - Nair Sooraj, Panda Subhashree, Tripathi Avinaya, Neithalath Narayanan (2021-06)
Relating Print-Velocity and Extrusion-Characteristics of 3D Printable Cementitious Binders:
Implications Towards Testing Methods - Pan Yifan, Zhang Yulu, Zhang Dakang, Song Yuying (2021-05)
3D Printing in Construction:
State of the Art and Applications - Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters - Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete - Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies - Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications - Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements - Pott Ursula, Stephan Dietmar (2021-04)
Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials - Bos Freek, Kruger Jacques, Lucas Sandra, Zijl Gideon (2021-04)
Juxtaposing Fresh Material-Characterisation-Methods for Buildability-Assessment of 3D Printable Cementitious Mortars - Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments - Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures - Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process - Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials - Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
Integrating Reinforcement in Digital Fabrication with Concrete:
A Review and Classification Framework - Rubin Ariane, Hasse Jéssica, Repette Wellington (2021-01)
The Evaluation of Rheological Parameters of 3D Printable Concretes and the Effect of Accelerating-Admixture - Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
A Review - Weger Daniel, Pierre Alexandre, Perrot Arnaud, Kränkel Thomas et al. (2021-01)
Penetration of Cement-Pastes into Particle-Beds:
A Comparison of Penetration Models - Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
Digital Design Computing and Modelling for 3D Concrete Printing - Baz Bilal, Rémond Sébastien, Aouad Georges (2021-01)
Influence of the Mix Composition on the Thixotropy of 3D Printable Mortars - Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars - Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
Improving Performance of Additive Manufactured Concrete:
A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods - Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria (2021-01)
Evaluation of Material-Modification Using PET in 3D Concrete Printing Technology - Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications - Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
A Review of 3D Printed Concrete:
Performance-Requirements, Testing Measurements and Mix-Design - Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
A 3D Concrete Printing Prefabrication Platform for Bespoke Columns - Bohuchval Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2020-12)
Effect of Metakaolin and Natural Fibers on Three-Dimensional Printing Mortar - Vasilić Ksenija (2020-12)
Additive Manufacturing in Concrete Construction:
Current Status - Kaszyńska Maria, Skibicki Szymon, Hoffmann Marcin (2020-12)
3D Concrete Printing for Sustainable Construction - Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2020-11)
Assessment of Asymmetrical Rheological Behavior of Cementitious Material for 3D Printing Application - Afarani Hajar, Carroll William, Garboczi Edward, Biernacki Joseph (2020-11)
Designing 3D Printable Cementitious Materials with Gel-Forming Polymers - Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method - Bhooshan Shajay, Mele Tom, Block Philippe (2020-11)
Morph & Slerp:
Shape Description for 3D Printing of Concrete - Baz Bilal, Aouad Georges, Khalil Noura, Rémond Sébastien (2020-11)
Inter-Layer Reinforcement of 3D Printed Concrete Elements - Anton Ana-Maria, Jipa Mihail-Andrei, Reiter Lex, Dillenburger Benjamin (2020-10)
Fast Complexity - Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
Extrusion-Based Concrete 3D Printing from a Material Perspective:
A State of the Art Review - Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2020-10)
Experimental Prediction of Material-Deformation in Large-Scale Additive Manufacturing of Concrete - Kruger Jacques, Zijl Gideon (2020-10)
A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication - Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose - Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
3D Printed Concrete for Large-Scale Buildings:
An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects - Heras Murica Daniel, Genedy Moneeb, Taha Mahmoud (2020-09)
Examining the Significance of Infill-Printing-Pattern on the Anisotropy of 3D Printed Concrete - Graser Konrad, Baur Marco, Apolinarska Aleksandra, Dörfler Kathrin et al. (2020-09)
DFAB House:
A Comprehensive Demonstrator of Digital Fabrication in Architecture - Marchment Taylor, Sanjayan Jay (2020-09)
Bond Properties of Reinforcing Bar Penetrations in 3D Concrete Printing - Pudjisuryadi Pamuda, Antoni Antoni, Chandra Jimmy (2020-09)
Review on 3D Printed Concrete as Structural Beam Members - Mahadevan Meera, Francis Ann, Thomas Albert (2020-08)
A Simulation-Based Investigation of Sustainability Aspects of 3D Printed Structures - Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction - Yang Huashan, Li Weiwei, Che Yujun (2020-08)
3D Printing Cementitious Materials Containing Nano-CaCO3:
Workability, Strength, and Microstructure - Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder - Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
An Experimental and Numerical Study - Anton Ana-Maria, Jipa Mihail-Andrei, Reiter Lex, Dillenburger Benjamin (2020-07)
Fast Complexity:
Additive Manufacturing for Prefabricated Concrete Slabs - Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers - Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials - Costa Eduardo, Shepherd Paul, Orr John, Ibell Tim et al. (2020-07)
Automating Concrete Construction:
Digital Design of Non-Prismatic Reinforced Concrete Beams - Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete - Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities - Hassan Hilal, Najjar Fady, Jassmi Hamad, Ahmed Waleed (2020-07)
Fresh and Hardened Properties of 3D Printed Concrete Made with Dune Sand - Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State - Kurt Sibel, Atalay Yiğit, Aydın Ozan, Avcıoğlu Berrak et al. (2020-07)
Design of Energy-Efficient White Portland Cement Mortars for Digital Fabrication - Lee Minu, Mata-Falcón Jaime, Popescu Mariana, Block Philippe et al. (2020-07)
Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork - Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-07)
Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters - Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach - Naboni Roberto, Breseghello Luca (2020-07)
High-Resolution Additive Formwork for Building-Scale Concrete Panels - Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing - Napolitano Rosanna, Menna Costantino, Forni Daniele, Asprone Domenico et al. (2020-07)
Dynamic Behavior of Layered 3D Printed Concrete Elements - Pekuss Raitis, Soto Borja (2020-07)
Preliminary Productivity-Analysis of Conventional, Pre-Cast and 3D Printing Production-Techniques for Concrete Columns with Simple Geometry - Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-07)
2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste-Intrusion - Scheurer Martin, Dittel Gözdem, Gries Thomas (2020-07)
Potential for the Integration of Continuous-Fiber-Based Reinforcements in Digital Concrete Production - Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing - Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
ACDC:
The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures - Varela Hugo, Barluenga Gonzalo, Palomar Irene (2020-07)
Rheology Evaluation of Cement-Paste with Nano-Clay , Nano-Silica and Polymeric Admixtures for Digital Fabrication - Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing - Codarin Sara (2020-07)
Additive Manufacturing Technologies in Restoration - Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
Elastic Buckling and Plastic Collapse During 3D Concrete Printing - Putten Jolien, Azima M., Heede Philip, Mullem T. et al. (2020-06)
Neutron-Radiography to Study the Water-Ingress via the Inter-Layer of 3D Printed Cementitious Materials for Continuous Layering - Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete - Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders - Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-05)
Effectiveness of the Rheometric Methods to Evaluate the Build-Up of Cementitious Mortars Used for 3D Printing - Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
From Smart Dynamic Casting to a Growing Family of Digital Casting Systems - Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
Setting-on-Demand for Digital Concrete:
Principles, Measurements, Chemistry, Validation - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
Mechanical Behavior of Printed Strain-Hardening Cementitious Composites - Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing - Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
Mechanical Assessment of Concrete:
Steel Bonding in 3D Printed Elements - Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2020-04)
Mastering Yield-Stress-Evolution and Formwork-Friction for Smart Dynamic Casting - Khan Mohd (2020-04)
Mix Suitable for Concrete 3D Printing:
A Review - Falliano Devid, Domenico Dario, Ricciardi Giuseppe, Gugliandolo Ernesto (2020-04)
3D Printable Lightweight Foamed Concrete and Comparison with Classical Foamed Concrete in Terms of Fresh State Properties and Mechanical Strength - Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
Eggshell:
Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures - Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper - Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
A Real-Scale Architectural Demonstrator - Ivanova Irina, Mechtcherine Viktor (2020-03)
Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete - Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
Nailing of Layers:
A Promising Way to Reinforce Concrete 3D Printing Structures - Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture - Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics - Otto Jens, Kortmann Jan, Krause Martin (2020-03)
Cost Calculation of Concrete 3D Printing - Grigoryan Erik, Semenova M. (2020-02)
Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles - Pott Ursula, Jakob Cordula, Jansen Daniel, Neubauer Jürgen et al. (2020-02)
Investigation of the Incompatibilities of Cement and Superplasticizers and Their Influence on the Rheological Behavior - Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing - Gopani Aagam, Shah Parshva, Shah R. (2020-01)
Developing and Analyzing Mix-Design for 3D Printable Concrete - Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing - Ivanova Irina, Mechtcherine Viktor (2020-01)
Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing - Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
3D Printed Concrete:
Applications, Performance, and Challenges - Wi Kwangwoo, Suresh Vignesh, Wang Kejin, Li Beiwen et al. (2019-12)
Quantifying Quality of 3D Printed Clay Objects Using a 3D Structured Light Scanning System - Lafhaj Zoubeir, Rabenantoandro Andry, Moussaoui Soufiane, Dakhli Zakaria et al. (2019-12)
Experimental Approach for Printability-Assessment:
Toward a Practical Decision-Making Framework of Printability for Cementitious Materials - Grigoryan Erik, Babanina Anna, Kulakov Kirill (2019-12)
Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles - Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Sanjayan Jay (2019-12)
Dimensional Accuracy, Flowability, Wettability, and Porosity in Inkjet 3DP for Gypsum and Cement Mortar Materials - Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse - Tiryaki Mehmet, Zhang Xu, Pham Quang-Cuong (2019-11)
Printing-While-Moving:
A New Paradigm for Large-Scale Robotic 3D Printing - Nerella Venkatesh, Krause Martin, Mechtcherine Viktor (2019-11)
Direct Printing-Test for Buildability of 3D Printable Concrete Considering Economic Viability - Markin Slava, Šahmenko Genādijs, Nerella Venkatesh, Näther Mathias et al. (2019-11)
Investigations on the Foam-Concrete Production Techniques Suitable for 3D Printing with Foam-Concrete - Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing - Anton Ana-Maria, Yoo Angela, Bedarf Patrick, Reiter Lex et al. (2019-10)
Vertical Modulations - Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
Additive Manufacturing in Construction:
A Review on Processes, Applications, and Digital Planning Methods - Vasilić Ksenija (2019-09)
Additive Manufacturing in Concrete Construction:
Current Status - Szabó Anna, Lloret-Fritschi Ena, Reiter Lex, Gramazio Fabio et al. (2019-09)
Revisiting Folded Forms with Digital Fabrication - Das Arnesh, Reiter Lex, Wangler Timothy, Flatt Robert (2019-09)
Hydration-Control of Ternary Cements for Digital Fabrication with Concrete - Shah Surendra, Kim Jae (2019-09)
Rheology of Fresh Concrete:
Historical Perspective and Glance in the Future - Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture - Wangler Timothy, Scotto Fabio, Lloret-Fritschi Ena, Flatt Robert (2019-09)
Residence-Time-Distributions in Continuous Processing of Concrete - Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process - Valente Marco, Sibai Abbas, Sambucci Matteo (2019-09)
Extrusion-Based Additive Manufacturing of Concrete Products:
Revolutionizing and Remodeling the Construction Industry - Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
Large-Scale Digital Concrete Construction:
CONPrint3D Concept for On-Site, Monolithic 3D Printing - Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing - Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials - Yuan Qiang, Li Zemin, Zhou Dajun, Huang Tingjie et al. (2019-08)
A Feasible Method for Measuring the Buildability of Fresh 3D Printing Mortar - Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication - Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials - Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications - Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete - Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
Measurement and Physical Origin - Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
Additive Manufacturing Processes for Infrastructure Construction:
A Review - Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
Digital Concrete:
A Review - Wolfs Robert, Suiker Akke (2019-06)
Structural Failure During Extrusion-Based 3D Printing Processes - Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes - Wolfs Robert, Bos Freek, Salet Theo (2019-06)
Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing - Tay Yi, Qian Ye, Tan Ming (2019-05)
Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test - Hamidi Fatemeh, Aslani Farhad (2019-05)
Additive Manufacturing of Cementitious Composites:
Materials, Methods, Potentials, and Challenge - Perrot Arnaud, Amziane Sofiane (2019-04)
3D Printing in Concrete:
General Considerations and Technologies - Perrot Arnaud, Rangeard Damien (2019-04)
3D Printing in Concrete:
Techniques for Extrusion-Casting - Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2019-04)
Mechanical Behavior of 3D Printed Cement Materials - Lafhaj Zoubeir, Dakhli Zakaria (2019-04)
Performance Indicators of Printed Construction Materials:
A Durability-Based Approach - Mazhoud Brahim, Perrot Arnaud, Picandet Vincent, Rangeard Damien et al. (2019-04)
Underwater 3D Printing of Cement-Based Mortar - Diggs-McGee Brandy, Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
Print Time vs. Elapsed Time:
A Temporal Analysis of a Continuous Printing Operation for Additive Constructed Concrete - Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
Development of the Construction Processes for Reinforced Additively Constructed Concrete - Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications - Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification - Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
Thermal-Humidity Parameters of 3D Printed Wall - Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2019-02)
Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion - Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2019-02)
Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing - Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Studying the Printability of Fresh Concrete for Formwork-Free Concrete Onsite 3D Printing Technology (CONPrint3D) - Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
Development of Powder-Based 3D Concrete Printing Using Geopolymers - Jeong Hoseong, Han Sun-Jin, Choi Seung-Ho, Lee Yoon et al. (2019-02)
Rheological Property Criteria for Buildable 3D Printing Concrete - Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing - Perrot Arnaud, Rangeard Damien, Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Extrusion of Cement-Based Materials:
An Overview - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Kazemian Ali, Yuan Xiao, Davtalab Omid, Khoshnevis Behrokh (2019-01)
Computer-Vision for Real-Time Extrusion-Quality-Monitoring and Control in Robotic Construction - Nair Sooraj, Alghamdi Hussam, Arora Aashay, Mehdipour Iman et al. (2019-01)
Linking Fresh Paste Microstructure, Rheology and Extrusion-Characteristics of Cementitious Binders for 3D Printing - Huang Hai, Huang Tingjie, Yuan Qiang, Zhou Dajun et al. (2019-01)
Temperature-Dependence of Structural Build-Up and Its Relation with Hydration Kinetics of Cement-Paste - Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-12)
Robotic Concrete Surface Finishing:
A Moldless Approach to Creating Thermally Tuned Surface Geometry for Architectural Building Components Using Profile 3D Printing - Chaar Ghassan, Stynoski Peter, Banko Marion (2018-11)
Structural Behavior of Layer-Printed Reinforced Concrete Beams - Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction - Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction - Mechtcherine Viktor, Nerella Venkatesh (2018-10)
3D-Concrete-Printing by Selective Deposition:
Requirements for Fresh Concrete and Testing - Teizer Jochen, Blickle Alexander, King Tobias, Leitzbach Olaf et al. (2018-10)
BIM for 3D Printing in Construction - Fiske Michael, Edmunson Jennifer, Weite Edward, Fikes John et al. (2018-09)
The Disruptive Technology That Is Additive Construction:
System Development Lessons Learned for Terrestrial and Planetary Applications - Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing - Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-09)
Thermally Informed Robotic Topologies:
Profile 3D Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High-Resolution Surface Geometry - Jones Scott, Bentz Dale, Martys Nicos, George William et al. (2018-09)
Rheological Control of 3D Printable Cement-Paste and Mortars - Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2018-09)
A Framework for Performance-Based Testing of Fresh Mixtures for Construction-Scale 3D Printing - Khalil Noura, Rémond Sébastien, Baz Bilal, Aouad Georges (2018-09)
Characterization of 3D Printing Mortars Made with OPC-CSA Mixes - Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures - Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
Challenges of Real-Scale Production with Smart Dynamic Casting - Ma Siwei, Kawashima Shiho (2018-09)
Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing - Marchment Taylor, Sanjayan Jay (2018-09)
Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing - Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures - Stefanoni Matteo, Angst Ueli, Elsener Bernhard (2018-09)
Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete - Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
Adapting Smart Dynamic Casting to Thin-Folded Geometries - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Nerella Venkatesh, Ogura Hiroki, Mechtcherine Viktor (2018-07)
Incorporating Reinforcement into Digital Concrete Construction - Silva Wilson, Andersen Thomas, Kudsk Anders, Jørgensen Kåre (2018-07)
3D Concrete Printing of Post-Tensioned Elements - Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2018-06)
Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion - Bhardwaj Abhinav, Zou Na, Pei Zhijian (2018-06)
Additive Manufacturing for Civil Infrastructure Design and Construction:
Current State and Gaps - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Wolfs Robert, Bos Freek, Salet Theo (2018-06)
Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete - Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete - Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
Hydration- and Rheology-Control of Concrete for Digital Fabrication:
Potential Admixtures and Cement-Chemistry - Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement - Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
Adaptive Control-System for Smart Dynamic Casting:
Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Burroughs Jedadiah, Johnson Carol, Chaar Ghassan, Banko Marion et al. (2018-04)
Automated Construction with Concrete:
Response of Wall- and Beam-Sections to Blast-Loads - Hojati Maryam, Nazarian Shadi, Duarte José, Radlińska Aleksandra et al. (2018-04)
3D Printing of Concrete:
A Continuous Exploration of Mix-Design and Printing-Process - Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
3D Printing of Earth-Based Materials:
Processing Aspects - Ketel Sabrina, Falzone Gabriel, Wang Bu, Washburn Newell et al. (2018-04)
A Printability Index for Linking Slurry Rheology to the Geometrical Attributes of 3D Printed Components - Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
3D Printing of Reinforced Concrete Elements:
Technology and Design Approach - Rippmann Matthias, Liew A., Mele Tom, Block Philippe (2018-03)
Design, Fabrication and Testing of Discrete 3D Sand-Printed Floor Prototypes - Lafhaj Zoubeir, Rabenantoandro Andry, Krimi Imane, Dakhli Zakaria et al. (2018-03)
3D Printing in Construction:
Application-Framework for a Robotic-Arm Based on the Extrusion-Technique - Mechtcherine Viktor, Nerella Venkatesh (2018-02)
3D Printing with Concrete:
State-of-the-Art, Trends, Challenges - Wolfs Robert, Bos Freek, Salet Theo (2018-02)
Early-Age Mechanical Behaviour of 3D Printed Concrete:
Numerical Modelling and Experimental Testing - Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2018-01)
Penetration of Cement-Pastes into Sand-Packings During 3D Printing:
Analytical and Experimental Study - Chen Yu, Çopuroğlu Oğuzhan, Veer Frederic (2018-01)
A Critical Review of 3D Concrete Printing as a Low-CO2 Concrete Approach - Ma Guowei, Li Zhijian, Wang Li (2017-12)
Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing - Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars - Bhooshan Shajay, Mele Tom, Block Philippe (2017-09)
Equilibrium-Aware Shape Design for Concrete Printing - Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-08)
Classification of Building Systems for Concrete 3D Printing - Panda Biranchi, Lim Jian, Mohamed Nisar, Paul Suvash et al. (2017-07)
Automation of Robotic Concrete Printing Using Feedback-Control-System - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Cheikh Khadija, Rémond Sébastien, Khalil Noura, Aouad Georges (2017-04)
Numerical and Experimental Studies of Aggregate-Blocking in Mortar-Extrusion - Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
Potential Benefits of Digital Fabrication for Complex Structures:
Environmental Assessment of a Robotically Fabricated Concrete Wall - Lloret-Fritschi Ena, Reiter Lex, Wangler Timothy, Gramazio Fabio et al. (2017-03)
Smart Dynamic Casting:
Slipforming with Flexible Formwork
BibTeX
@article{wang_llor_reit_hack.2016.DC,
author = "Timothy Paul Wangler and Ena Lloret-Fritschi and Lex Reiter and Norman Peter Hack and Fabio Gramazio and Matthias Daniel Kohler and Mathias Bernhard and Benjamin Dillenburger and Jonas Buchli and Nicolas Roussel and Robert Johann Flatt",
title = "Digital Concrete: Opportunities and Challenges",
doi = "10.21809/rilemtechlett.2016.16",
year = "2016",
journal = "RILEM Technical Letters",
volume = "1",
pages = "67--74",
}
Formatted Citation
T. P. Wangler, “Digital Concrete: Opportunities and Challenges”, RILEM Technical Letters, vol. 1, pp. 67–74, 2016, doi: 10.21809/rilemtechlett.2016.16.
Wangler, Timothy Paul, Ena Lloret-Fritschi, Lex Reiter, Norman Peter Hack, Fabio Gramazio, Matthias Daniel Kohler, Mathias Bernhard, et al.. “Digital Concrete: Opportunities and Challenges”. RILEM Technical Letters 1 (2016): 67–74. https://doi.org/10.21809/rilemtechlett.2016.16.