2025-03
- Jiang Yu, Zhang Qingxin, Tabbaa Abir, Daly Ronan (2025-03)
The Critical Role of Time-Dependent Rheology for Improved Quality Control of 3D Printed Cementitious Structures
- Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
Advances in Sustainable Additive Manufacturing:
A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
- Xiao Yinan, Hack Norman, Kloft Harald, Lowke Dirk et al. (2025-03)
Constraint-Based Form-Finding of Space Trusses for Injection 3D Concrete Printing Through Vector-Based Graphic Statics
- Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2025-03)
Multi-Objective Optimization of a Sustainable LC3 Mortar for 3D Printing
- Latifiilkhechi Leva, Aminbakhsh Saman, Akcay Emre (2025-03)
Investigating the Barriers to the Adoption of 3D Printing Technology in the Turkish Construction Industry
- Tran Mien, Le Thanh, Cao Nguyen, Nguyen Thi (2025-03)
Sustainable Prospect for Entire Replacement of River Sand with Recycled Glass Aggregate in 3D Printing Concrete:
Rheological Properties, Printability, and Alkali-Silica Reaction
- Liu Chao, Li Xin, Wu Yiwen, Liu Huawei et al. (2025-03)
Impact of External Loading on the Time-Dependent Evolution of 3D Printed Concrete with Recycled Sand in the Green State
- Mim Nusrat, Shaikh Faiz, Sarker Prabir (2025-03)
Sustainable 3D Printed Concrete Incorporating Alternative Fine Aggregates:
A Review
- Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-03)
Possibilities for Reducing the Environmental Impact in the Construction Industry Using the Example of a 3D Printed Staircase
- Du Guoqiang, Sun Yan, Qian Ye (2025-03)
In-Plane and Out-of-Plane Compressive Performance of Bio-Inspired 3D Printed Strain-Hardening Cementitious Composite Lattice Structures
- Kloft Harald, Hack Norman, Sawicki Bartłomiej, Dörrie Robin et al. (2025-03)
Digital Fabrication Strategies for Sustainability
- Koszela Kamila, Chajec Adrian (2025-03)
Sustainable Additive Manufacturing:
How the Composition of the Cementitious Mix Influences Its Fresh Properties
- Mansouri Abraham, Wolde Japi, Joda Akram (2025-03)
The Potential of Sand as a Sustainable Infill for 3D Concrete Printed Building Walls
- Nieświec Martyna, Chajec Adrian (2025-03)
Effect of Materials on the Properties of Fresh Cementitious Composites for 3D Printing:
Short Review
- Rajczakowska Magdalena (2025-03)
Trends in Bio-Based 3D Concrete Printing:
An NLP-Driven Analysis
- Gulati Hemant, Lu Tianxing (2025-03)
Customized 3D Printable Concrete:
A Systematic Review of Challenges, Methodologies, and Adoption Strategies
- Chai Hwa, Shiotani Tomoki (2025-03)
Opening Letter of RILEM TC QPA:
Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques
- Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
- Nassrullah Ghaith, Ali Mohd, Rub Rashid, Cho Cung-Suk et al. (2025-03)
Optimizing Cement-Based Material Formulation for 3D Printing:
Integrating Carbon Nanotubes and Silica Fume
- Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
- Mesnil Romain, Rosa Pedro, Demont Léo (2025-03)
Thickness Optimisation in 3D Printed Concrete Structures
- Calmanovici Miran, Livne Achiya, Barath Shany (2025-03)
From Waste to Resource:
A Design to Fabrication Approach Integrating Recycled Wood-Mycelium Mixtures for 3D Printing in Architecture
- Gautam Kushagra, Solav Dana, Barath Shany, Austern Guy (2025-03)
Using Digital Image Correlation to Analyze Deformation in Wood-Based Liquid Deposition Modelling
- Li Yuhan, Rian Iasef, Chen Hanmei, Tang Shu (2025-03)
Application of Fractal Curves for 3D Concrete Printing of Porous Prefab Panels
- Li Shunuo, Xu Haoyi, Xia Xinyue, Fan Haojie et al. (2025-03)
Bio-Envelop:
Robotic 3D Printed Facade Using Cow Dung and Laterite Soil
- Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
Seismic Performance of 3D Printed Reinforced Concrete Walls:
Experimental Study and Numerical Simulation
- Meyuhas Ohad, Larianovsky Pavel, Bentur Arnon, Magdassi Shlomo et al. (2025-03)
Methods for Earth-Based Falsework in Multi-Material Additive Manufacturing at an Architectural Scale
- Vargas José, Westerlind Helena, Breseghello Luca, Silfwerbrand Johan (2025-03)
Design of Porous Structures in 3D Concrete Printing Using Procedural Print Patterns
- Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
- Hlobil Michal, Michel Luca, Pundir Mohit, Kammer David (2025-03)
A Thermo-Hygro Model to Determine the Factors Dictating Cold Joint Formation in 3D Printed Concrete
- Li Hualong, Shi Ye, Rong Hui, Dai Kaichao (2025-03)
Effect of Additives on the Performance of 3D-Printing Ultra-High Performance Concrete
- Chen Wei, Pan Jinlong, Zhu Binrong, Han Jinsheng et al. (2025-03)
Nonlinear Predictive Modeling of Building Rates Incorporating Filament Compression Deformations in 3D Printed Geopolymer Concrete
- Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
- Yuan Yong, Sheng Ruyi, Yao Xupeng, Pichler Bernhard et al. (2025-03)
A Three-Step Development Strategy for 3D Printable Concrete Containing Coarse Aggregates
- Zhou Wen, Xu Yading, Meng Zhaozheng, Xie Jinbao et al. (2025-03)
Filament Stitching:
An Architected Printing Strategy to Mitigate Anisotropy in 3D-Printed Engineered Cementitious Composites
- Khanverdi Mohsen, Das Sreekanta (2025-03)
Testing Prisms as a Method for Assessing Compressive Properties of 3D-Printed Structural Members:
Experimental and Numerical Studies
- Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
- Liu Han, Laflamme Simon, Cardinali Amelia, Lyu Ping et al. (2025-03)
Enhancing 3D-Printed Cementitious Composites with Recycled Carbon Fibers from Wind Turbine Blades
- Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
- Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
A Case Study of a Full-Size Two-Story Building
- Minde Pravin, Patil Jagruti (2025-03)
A Comprehensive Review of Factors Affecting 3D Printing Technology Adaptation in the Indian Construction Sector
- Rajendran Naveenkumar, Runge Troy, Bergman Richard, Nepal Prakash et al. (2025-03)
Economic and Environmental Impact Analysis of Cellulose Nanocrystal-Reinforced Cementitious Mixture in 3D Printing
- Miri Zahra, Baaj Hassan, Polak Maria (2025-03)
3D-Printed Concrete Bridges:
Material, Design, Construction, and Reinforcement
- Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
- Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-03)
Investigating Shrinkage and Mechanical Properties of 3D Printed Concretes Under Different Curing Conditions
- Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
Fire Performance Evaluation of 3D-Printed Concrete Walls:
A Combined Full-Scale and Numerical Modeling Approach
- Zafar Muhammad, Shahid Adnan, Sedghi Reza, Hojati Maryam (2025-03)
Optimization of Biopolymer Additives for 3D Printable Cementitious Systems:
A Design of Experiment Approach
- Li Yuhan, Rian Iasef, Chen Hanmei, Tang Shu (2025-03)
Application of Fractal Curves for 3D Concrete Printing of Porous Prefab Panels
- Özalp Abdulkadir, Aldemir Alper (2025-03)
Artificial Intelligence-Based Displacement Capacity Prediction Tool for Three-Dimensional Printed Concrete Walls
- Vargas José, Westerlind Helena, Breseghello Luca, Silfwerbrand Johan (2025-03)
Design of Porous Structures in 3D Concrete Printing Using Procedural Print Patterns
- Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
- Kuang Weifeng, Pavlenko Petro, Guo Haoyu, Tian Kuo et al. (2025-03)
Utilization of Machine-Made Sand Waste in 3D-Printed Ecological Concrete for Artificial Reefs
- Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
- Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wu Fei et al. (2025-03)
Automated Analysis System for Micro-Defects in 3D Printed Concrete
- Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Feys Dimitri et al. (2025-03)
Evaluation of Fresh Properties of High Calcium Content Fly Ash-Based Alkali-Activated 3D-Printed Mortar
- Gleiser Leonie, Mechtcherine Viktor (2025-03)
3D-Druck mit Lehm:
Interaktion von Material und Maschine
- Jiang Youbau, Liu Yan, Zhang Zupan, Gao Pengxiang et al. (2025-03)
Tensile Performance of Interlayer Interface of Interlocking 3D Printed Concrete with Single Toothlike Nozzle
- Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-03)
Experimental Study on Rheological Properties and 3D Printing of Simulated Lunar Soil Polymers
- Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes
- Khanverdi Mohsen, Das Sreekanta (2025-03)
Experimental Study on Water Penetration and Thermal Resistance of Large-Scale 3D-Printed Cementitious Walls
- Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
- Araújo Rísia, Martinelli Antônio, Cabral Kleber, Nunes Ueslei et al. (2025-03)
Effect of Lightweight Expanded Clay Aggregate (LECA) On the Printability of Cementitious Compositions for 3D Printing
- Silveira Júnior Jairon, Sakata Rafael, Onghero Lucas, Matos Paulo et al. (2025-03)
Al-Anodizing Waste as a Supplementary Cementitious Material for 3D-Printed Portland Cement
- Skripkiūnas Gintautas, Tolegenova Aigerim, Rishko Lyudmyla, Akmalaiuly Kenzhebek et al. (2025-03)
Durability and Cracking Defects in 3D-Printed Concrete
- Liu Xiongfei, Guo Pei, Wang Haonan, Zhang Yi (2025-03)
Spray-Based 3D Printed Cementitious Electromagnetic Wave Absorption Materials:
Optimization with Structures Design
- Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
- Akhrif Iatimad, Oulkhir Fatima, Jai Mostapha, Rihani Nadir et al. (2025-03)
Earth-Based Materials 3D Printing, Extrudability and Buildability Numerical Investigations
- Shahzad Qamar, Li Fangyuan (2025-03)
Influence of Concrete Interfaces on the Damage and Pull-Out Behavior of 3D-Printed Concrete Structures
- Sharma Shivam, Tahlawi M., Delavar Mohammad, Sideris Petros (2025-03)
Structural Design Methodology for Low-Rise 3D Printed Concrete (3DPC) Buildings Subjected to Non-Seismic Loading:
Description, Application and Validation