Keita Emmanuel¶

1. Caneda-Martínez Laura, Hassan M., Demont Léo, Keita Emmanuel et al. (2026-01)
   Fast Penetration Testing of Printable Concretes with a Portable Device:
   Robustness and Calibration
2. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
   Durability Assessment of 3D Printed Cement-Based Materials:
   A RILEM TC 304-ADC Interlaboratory Study
3. Guillen Ruth, Naldoni Lapo, Quka Katerina, Gioia Flavio et al. (2025-06)
   Water Resistance of 3D Printed Clay with Bio-Stabilizers
4. Denis L., Omikrine-Metalssi O., Karam-Cabrerizo R., Barnes-Davin L. et al. (2024-09)
   Impact of Very Early-Age Drying on Printed Concrete Microstructures
5. Keita Emmanuel, Zuo Wenqiang, Caneda-Martínez Laura, Aimedieu Patrick et al. (2024-09)
   X-Ray Tomography Insights into Early Drying Effects in 3D Concrete Printing
6. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
   Snapshot on 3D Printing with Alternative Binders and Materials:
   Earth, Geopolymers, Gypsum and Low-Carbon Concrete
7. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
   On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
8. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
   On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
9. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
   Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
   From Standard Casting to 3D Printing
10. Keita Emmanuel, Perrot Arnaud (2024-02)
    Processing of Earth-Based Materials:
    Current Situation and Challenges Ahead
11. Lowke Dirk, Mai (née Dressler) Inka, Keita Emmanuel, Perrot Arnaud et al. (2022-02)
    Material-Process Interactions in Particle-Bed 3D Printing and the Underlying Physics
12. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
13. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
14. Zuo Wenqiang, Dong Chenghao, Keita Emmanuel, Roussel Nicolas (2020-07)
    Penetration Study of Liquid in Powder-Bed for 3D Powder-Bed Printing
15. Zuo Wenqiang, Keita Emmanuel, Bornert Michel, Roussel Nicolas (2020-07)
    Drying of 3D Printed Mortar Filaments at Early-Age Assessed by X-Ray Computed Tomography
16. Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
    Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
    Measurement and Physical Origin