Rémond Sébastien¶

1. Khoury Eliane, Cheikh Khadija, Schutter Geert, Cazacliu Bogdan et al. (2025-11)
   Using Vacuum Mixing for 3D Printing of Mortars Made with Recycled Sand
2. Thib Raghed, Rémond Sébastien, Belayachi Naima, Rémond Elise et al. (2025-11)
   3D Printable Eco-Efficient Mortars Under Salt Water:
   Mix Design and Characterization
3. Thib Raghed, Taleb Maria, Belayachi Naima, Bulteel David et al. (2025-05)
   Hardened Properties of 3D Printable Mortars with Full Replacement of Natural Sand by Recycled Sand
4. Do Duc, Diab Zeinab, Rémond Sébastien, Hoxha Dashnor (2025-01)
   Numerical Simulation-Tools for 3D Printing
5. Taleb Maria, Bulteel David, Montagne Alex, Roudet Francine et al. (2024-11)
   Influence of Thermo-Hygrometric Conditions on the Interface Bond in 3D Printed Concrete
6. Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
   Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
   Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates
7. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
   Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
8. Thib Raghed, Belayachi Naima, Bouarroudj Mohamed, Bulteel David et al. (2023-10)
   A Methodology for Designing 3D Printable Mortar Based on Recycled Sand
9. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2023-04)
   Probabilistic Prediction of Structural Failure During 3D Concrete Printing Processes
10. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-04)
    Interfacial Weakness Criterion by Indentation in 3D Printed Concrete
11. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-01)
    Multi-Scale Mechanical Characterization of the Interface in 3D Printed Concrete
12. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2022-06)
    Uncertainty Quantification of Concrete Properties at Fresh State and Stability-Analysis of the 3D Printing Process by Stochastic Approach
13. Hynek Estelle, Bulteel David, Urquizar Antoine, Rémond Sébastien (2022-06)
    Formulation and Characterization of a Low-Carbon Impact Cementitious Ink for 3D Printing
14. Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
    Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments
15. Baz Bilal, Rémond Sébastien, Aouad Georges (2021-01)
    Influence of the Mix Composition on the Thixotropy of 3D Printable Mortars
16. Baz Bilal, Aouad Georges, Khalil Noura, Rémond Sébastien (2020-11)
    Inter-Layer Reinforcement of 3D Printed Concrete Elements
17. Hondt Mélody, Rémond Sébastien, Leblond Philippe, Iea Bunthan et al. (2020-07)
    Fire Behavior of a Printed Sample for Building
18. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
    Mechanical Assessment of Concrete:
    Steel Bonding in 3D Printed Elements
19. Baz Bilal, Aouad Georges, Rémond Sébastien (2020-01)
    Effect of the Printing Method and Mortar’s Workability on Pull-Out Strength of 3D Printed Elements
20. Khalil Noura, Rémond Sébastien, Baz Bilal, Aouad Georges (2018-09)
    Characterization of 3D Printing Mortars Made with OPC-CSA Mixes
21. Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
    Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars
22. Cheikh Khadija, Rémond Sébastien, Khalil Noura, Aouad Georges (2017-04)
    Numerical and Experimental Studies of Aggregate-Blocking in Mortar-Extrusion