Rangel Bárbara¶

1. Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
   Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders
2. Aden Abdishukri, Nuñez Montoya Alejandra, Ponce Josef, Rangel Bárbara et al. (2026-01)
   FAB-BIO:
   A Review of Bio-Based Materials Applied on 3D-Printed Living Walls
3. Bugarin Juan, Hajjar Ayla, Ssengooba Aloysious, Rangel Bárbara et al. (2026-01)
   Advancing Circular Bioeconomy and Sustainable Construction in the Iberian Peninsula:
   Addressing the Potential of Timber Residues for 3D Printing
4. Cojocari Iulia, Martins Mirna, Rangel Bárbara, Cunha Jaime (2026-01)
   Scaling 3D Printing for Large-Scale Production by Optimising Workflow
5. Cunha Jaime, Rangel Bárbara, Vilas-Boas Rodrigo (2026-01)
   Evaluating the Environmental Efficiency of on-Site and Off-Site 3D Construction Printing:
   A Roadmap Towards Sustainable Building Practices
6. Gnanaraj Anies, Moreno Leyla, Thabet Reham, Rangel Bárbara et al. (2026-01)
   Comparative Analysis of Onsite Versus Offsite 3D Printing in Construction:
   Benefits, Challenges, and Case Studies
7. Nadais Mariana, Cunha Rui, Pessoa Ana Sofia, Delgado João et al. (2026-01)
   Enhancing Indoor Environmental Quality Through Real-Time Monitoring:
   A Case Study of a 3D-Printed House
8. Ribeiro Elis, Rangel Bárbara, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
   Improving Natural Ventilation Through 3D Concrete Printing
9. Teixeira João, Jesus Manuel, Rangel Bárbara, Maia Lino et al. (2026-01)
   Expanding 3D Concrete Printing Customization with Biomimetic Textures
10. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
11. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
    Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
12. Teixeira João, Jesus Manuel, Ribeiro Elis, Rangel Bárbara et al. (2025-12)
    Large Format Additive Manufacturing with Cement and Clay Applications
13. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
    Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
14. Jesus Manuel, Dias Ricardo, Teixeira João, Delgado João et al. (2025-09)
    Optimisation of 3D Printable Cement- and Lime-Based Mortars for Built Heritage Rehabilitation
15. Jesus Manuel, Teixeira João, Guimarães Ana, Rangel Bárbara et al. (2025-04)
    From 3D Survey Data of Cultural Heritage Artifacts to 3D Printed Prototypes Based on Cement and Lime-Based Mortars
16. Jesus Manuel, Ribeiro Elis, Teixeira João, Rangel Bárbara et al. (2024-11)
    3D Printed Mortars with Marble-Powder Towards Sustainable Construction
17. Latorraca Tássia, Guimarães Ana, Rangel Bárbara (2024-03)
    Bibliometric Analysis of Personalized 3D Printed Concrete-Based Modules for Construction:
    Leveraging the Ordinatio Method
18. Jesus Manuel, Teixeira João, Alves Jorge, Pessoa Ana Sofia et al. (2023-10)
    Potential Use of Sugarcane-Bagasse-Ash in Cementitious Mortars for 3D Printing
19. Jesus Manuel, Pessoa Ana Sofia, Guimarães Ana, Rangel Bárbara et al. (2023-06)
    A Reflection on Sustainable Opportunities for 3D Printing in Construction
20. Simioni Fernanda, Rangel Bárbara, Campos Nadine, Teixeira João (2023-04)
    3D Printing for Construction:
    A Systematic Review of Its Sustainability
21. Jesus Manuel, Guimarães Ana, Rangel Bárbara, Alves Jorge (2023-02)
    The Potential of 3D Printing in Building Pathology:
    Rehabilitation of Cultural Heritage
22. Jesus Manuel, Costa Joana, Teixeira João, Pessoa Ana Sofia et al. (2023-01)
    Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars
23. Teixeira João, Zuazua-Ros Amaia, Jesus Manuel, Rangel Bárbara et al. (2023-01)
    How 3DPC Will Transform Architectural Design
24. Teixeira João, Schaefer Cecília, Rangel Bárbara, Maia Lino et al. (2022-11)
    A Road Map to Find in 3D Printing a New Design Plasticity for Construction:
    The State of Art
25. Teixeira João, Schaefer Cecília, Maia Lino, Rangel Bárbara et al. (2022-03)
    Influence of Supplementary Cementitious Materials on Fresh Properties of 3D Printable Materials
26. Teixeira João, Schaefer Cecília, Rangel Bárbara, Alves Jorge et al. (2021-03)
    Development of 3D Printing Sustainable Mortars Based on a Bibliometric Analysis