Santhanam Manu¶

1. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
   Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence
2. Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
   Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation
3. Haripan Vislavath, Senthilnathan Shanmugaraj, Santhanam Manu, Raphael Benny (2025-10)
   Printability Assessment of Concrete 3D Printed Elements with Recycled Fine Aggregate
4. Santhanam Manu (2025-10)
   Multi-Scale Assessment of the Structural Performance of 3D Printed Concrete
5. Santhosh S., Raphael Benny, Santhanam Manu (2025-07)
   Exploration of Sustainable Beam Design Using Voronoi Patterns in Concrete 3D Printing
6. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Approach and Main Results:
   Mechanical Properties of 3D Printed Concrete
7. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Compressive Strength and Modulus of Elasticity:
   Mechanical Properties of 3D Printed Concrete
8. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
   Flexural and Tensile Strength:
   Mechanical Properties of 3D Printed Concrete
9. Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
   Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns
10. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2024-09)
    Non-Linear Behavior Under Compression of Hardened 3D Printed Concrete
11. Bhattacherjee Shantanu, Jain Smrati, Pratapa Phanisri, Santhanam Manu et al. (2024-09)
    Construction of Boundary Wall for an International Cricket Stadium in India:
    A Case Study
12. Haripan Vislavath, Senthilnathan Shanmugaraj, Gettu Ravindra, Santhanam Manu et al. (2024-09)
    Open-Time and Extrudability-Performance-Analysis of 3D Printed Concrete with Recycled Concrete Fine Aggregates Using Rheological- and Computer-Vision-Techniques
13. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2024-07)
    Investigating the Interaction of Limestone-Calcined-Clay and OPC-Based Systems with a Methylhydroxyethyl-Cellulose-Based Viscosity-Modifier Used for 3D Printable Concrete
14. Tiwari Adarsh, Pratapa Phanisri, Santhanam Manu (2024-03)
    Lattice Concrete:
    3D Printed Periodic Cellular Structures Through Selective Cement-Hydration
15. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2023-03)
    Developing 3D Printable and Buildable Limestone-Calcined-Clay-Based Cement Composites with Higher Aggregate Content
16. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2022-11)
    Criticality of Binder-Aggregate Interaction for Buildability of 3D Printed Concrete Containing Limestone-Calcined-Clay
17. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu, Thiruvenkatamani G. (2022-06)
    Mechanical Properties and Failure-Pattern of 3D Printed Hollow Cylinders and Wall Segments under Uniaxial Loading
18. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2022-06)
    Criticality of Microstructural Evolution at an Early-Age on the Buildability of an Accelerated 3D Printable Concrete
19. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
    A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
20. Bhattacherjee Shantanu, Santhanam Manu (2022-04)
    Investigation on the Effect of Alkali-Free Aluminium Sulfate-Based Accelerator on the Fresh Properties of 3D Printable Concrete
21. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
    Sustainable Materials for 3D Concrete Printing
22. Bhattacherjee Shantanu, Santhanam Manu (2020-07)
    Enhancing Buildability of 3D Printable Concrete by Spraying of Accelerating-Admixture on Surface
23. Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
    A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders
24. Rahul Attupurathu, Santhanam Manu (2020-02)
    Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates
25. Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
    A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials
26. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2019-08)
    Mechanical Characterization of 3D Printable Concrete
27. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
    3D Printable Concrete:
    Mixture-Design and Test-Methods