Şahmaran Mustafa¶

1. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
   Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
   Effect of Cold Joint, Axial Load and Load Type
2. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
   The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
   Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
3. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
   Recent Advances in CDW-Based Geopolymers:
   A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
4. Demirbaş Ali, Tuğluca Merve, Şahin Oğuzhan, İlcan Hüseyin et al. (2025-05)
   A Comprehensive Study on the Valorization of Recycled Concrete Aggregates in 3D-Printable Cementitious Systems
5. İlcan Hüseyin, Külak Adnan, Şahin Oğuzhan, Aldemir Alper et al. (2025-04)
   Reinforcement and Modular System for 3DCP Geopolymer Structures Using Construction and Demolition Waste
6. Takva Çağatay, Top Semahat, Gökgöz Berru, Gebel Şeyma et al. (2024-11)
   Applicability of 3D Concrete Printing Technology in Building Construction with Different Architectural Design Decisions in Housing
7. İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
   3D Printable Construction and Demolition Waste-Based Geopolymer:
   Investigating the Effects of Additives on Engineering Properties
8. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
   Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
   A Comprehensive Study on Operational and Material Parameters
9. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
   The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
   Numerical Modeling and Experimental Validation
10. Imram Ramsha, Rashid Ans, Khan Shoukat, İlcan Hüseyin et al. (2023-10)
    Buildability-Analysis on Squared Profile Structure in 3D Concrete Printing
11. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
12. Khan Shoukat, İlcan Hüseyin, Aminipour Ehsan, Şahin Oğuzhan et al. (2023-07)
    Buildability-Analysis on Effect of Structural Design in 3D Concrete Printing:
    An Experimental and Numerical Study
13. Khan Shoukat, Jassim Muhammad, İlcan Hüseyin, Şahin Oğuzhan et al. (2023-04)
    3D Printing of Circular Materials:
    Comparative Environmental Analysis of Materials and Construction Techniques
14. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
    Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
15. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
    Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
16. Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
    Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
17. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
    Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
18. Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
    Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing