Buswell Richard¶

1. Liu Xingzi, Buswell Richard, Cavalaro Sergio, Xu Jie et al. (2026-01)
   Influence of Inter-Filament Voids on the Failure Mechanism and Compressive Strength of 3D Printed Concrete
2. Crook Thomas, Li Matthew, Buswell Richard, Allinson David (2025-10)
   Anisotropic Hygrothermal Properties of 3D Printed Concrete
3. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Compressive Strength and Modulus of Elasticity:
   Mechanical Properties of 3D Printed Concrete
4. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
   Flexural and Tensile Strength:
   Mechanical Properties of 3D Printed Concrete
5. Liu Xingzi, Xu Jie, Dobrzanski James, Kolawole John et al. (2025-05)
   Factors Affecting the Flexural Performance of Reinforced 3D Printed Concrete Beams
6. Dobrzanski James, Xu Jie, Bartek Rasti, Becker Daniel et al. (2025-04)
   From Digital Crafting to Digital Manufacturing:
   Automated Production Using Hybrid 3D Concrete Printing
7. Kolawole John, Buswell Richard, Mahmood Sultan, Isa Muhammed et al. (2025-02)
   On the Origins of Anisotropy of Extrusion-Based 3D Printed Concrete:
   The Roles of Filament Skin and Agglomeration
8. Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
   Sustainability Principles in 3D Concrete Printing:
   Analysing Trends, Classifying Strategies, and Future Directions
9. Farhan Abdul, Xu Jie, Dobrzanski James, Kolawole John et al. (2024-09)
   Quantifying 3D Concrete Printing Production Waste
10. Gill Connor, Justham Laura, Lohse Niels, Haynes Adam et al. (2024-09)
    Measurement and Control of Serial Manipulator Robots for 3D Concrete Printing
11. Lei Siduo, Kolawole John, Dobrzanski James, Xu Jie et al. (2024-09)
    Enhancing Surface Quality in Additive Manufacturing Applications:
    A Micro-Power Float Approach
12. Lowke Dirk, Anton Ana-Maria, Buswell Richard, Jenny Ercan et al. (2024-09)
    Digital Fabrication with Concrete Beyond Horizontal Planar Layers
13. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
    On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
14. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-07)
    The Theory of Critical Distances to Perform the Static Assessment of 3D Printed Concrete Weakened by Manufacturing-Defects and Cracks
15. Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
    Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
16. Xu Jie, Kolawole John, Provis John, Dobrzanski James et al. (2022-06)
    An Early Trial on Milling 3D Printed Concrete Geometries:
    Observations and Insights of the Process
17. Buswell Richard (2022-06)
    CCR Digital Concrete 2022 SI:
    Editorial
18. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
19. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-05)
    The Theory of Critical Distances to Assess the Effect of Cracks & Manufacturing-Defects on the Static Strength of 3D Printed Concrete
20. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
    Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability
21. Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
    Technology Readiness:
    A Global Snapshot of 3D Concrete Printing and the Frontiers for Development
22. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
23. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
24. Roussel Nicolas, Lowke Dirk, Buswell Richard (2022-01)
    Digital Fabrication with Cement-Based Materials:
    The RILEM D.F.C. Technical Committee
25. Dobrzanski James, Buswell Richard, Cavalaro Sergio, Kinnell Peter et al. (2021-09)
    Milling a Cement-Based 3D Printable Mortar in Its Green State Using a Ball-Nosed Cutter
26. Wang Li, Ma Guowei, Liu Tianhao, Buswell Richard et al. (2021-07)
    Inter-Layer Reinforcement of 3D Printed Concrete by the In-Process Deposition of U-Nails
27. Kinnell Peter, Dobrzanski James, Xu Jie, Wang Weiqiang et al. (2021-06)
    Precision Manufacture of Concrete Parts Using Integrated Robotic 3D Printing and Milling
28. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
    Integrating Reinforcement in Digital Fabrication with Concrete:
    A Review and Classification Framework
29. Buswell Richard, Kinnell Peter, Xu Jie, Hack Norman et al. (2020-07)
    Inspection Methods for 3D Concrete Printing
30. Wang Weiqiang, Konstantinidis Nikolaos, Austin Simon, Buswell Richard et al. (2020-07)
    Flexural Behavior of AR-Glass-Textile-Reinforced 3D Printed Concrete Beams
31. Xu Jie, Buswell Richard, Kinnell Peter, Biro Istvan et al. (2020-06)
    Inspecting Manufacturing Precision of 3D Printed Concrete Parts Based on Geometric Dimensioning and Tolerancing
32. Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
    A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete
33. Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
    3D Printing Using Concrete-Extrusion:
    A Roadmap for Research
34. Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
    Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components
35. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Mix-Design and Fresh Properties for High-Performance Printing Concrete
36. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Hardened Properties of High-Performance Printing Concrete
37. Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
    Developments in Construction-Scale Additive Manufacturing Processes
38. Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
    Development of a Viable Concrete Printing Process
39. Kestelier Xavier, Buswell Richard (2009-10)
    A Digital Design Environment for Large-Scale Rapid Manufacturing
40. Buswell Richard, Thorpe Tony, Soar Rupert, Gibb Alistar (2008-05)
    Design, Data and Process Issues for Mega-Scale Rapid Manufacturing Machines Used for Construction
41. Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
    Freeform Construction:
    Mega-Scale Rapid Manufacturing for Construction