2020-03¶

1. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
   Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
2. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
   Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
   A Real-Scale Architectural Demonstrator
3. Ivanova Irina, Mechtcherine Viktor (2020-03)
   Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete
4. Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
   Nailing of Layers:
   A Promising Way to Reinforce Concrete 3D Printing Structures
5. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
   Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
6. Özalp Fatih, Yılmaz Halit (2020-03)
   Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications
7. Shahsavari Rouzbeh, Hwang Sung (2020-03)
   Bio-Iinspired Cementitious Materials:
   Main Strategies, Progress, and Applications
8. Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
   Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture
9. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
   Extrusion-Based Additive Manufacturing with Cement-Based Materials:
   Production Steps, Processes, and Their Underlying Physics
10. Vergara Luis, Colorado Henry (2020-03)
    Additive Manufacturing of Portland Cement-Pastes with Additions of Kaolin, Superplastificant and Calcium-Carbonate
11. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Cunha Vítor (2020-03)
    Inverse Analysis of Three-Point Bending Tests for 3D Printed Fiber-Reinforced Mortars
12. Ding Tao, Xiao Jianzhuang, Qin Fei, Duan Zhenhua (2020-03)
    Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early-Ages
13. Manikandan Karthick, Wi Kwangwoo, Zhang Xiao, Wang Kejin et al. (2020-03)
    Characterizing Cement Mixtures for Concrete 3D Printing
14. Otto Jens, Kortmann Jan, Krause Martin (2020-03)
    Cost Calculation of Concrete 3D Printing
15. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2020-03)
    An Overview of the Execution of 3D Printed Sub-Scale Habitat on Mars:
    A Case Study to Exemplify the Automated Construction Process
16. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
    Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
17. Haustein Martin, Kluwe Moritz, Schwarze Rüdiger (2020-03)
    Experimental Investigation of the Pumping of a Model-Concrete Through Pipes
18. Sun Xiaoyan, Wang Qun, Wang Hailong, Chen Long (2020-03)
    Influence of Multi-Walled Nanotubes on the Fresh and Hardened Properties of a 3D Printing PVA Mortar Ink
19. Jo Jun, Jo Byung, Cho Woohyun, Kim Jung-Hoon (2020-03)
    Development of a 3D Printer for Concrete Structures:
    Laboratory Testing of Cementitious Materials
20. Hack Norman, Mai (née Dressler) Inka, Brohmann Leon, Gantner Stefan et al. (2020-03)
    Injection 3D Concrete Printing (I3DCP):
    Basic Principles and Case Studies