Du Hongjian¶

1. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
   Durability Assessment of 3D Printed Cement-Based Materials:
   A RILEM TC 304-ADC Interlaboratory Study
2. Luo Rui, Sun Bin, Fei Xiangpeng, Du Hongjian (2025-10)
   Interlayer Strength Loss in 3D Printed Concrete Due to Time-Gap-Induced Macroporosity
3. Liu Ruiqing, Du Hongjian (2025-09)
   Optimizing Thermal Insulation Through Geometric Design:
   Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
4. Yao Weijing, Gao Yangyunzhi, Huang Xin, Du Hongjian (2025-08)
   Influence of Printing Speed and Extrusion Speed on the Performance and Pore Structures of 3D Printed Mortar
5. Yerikania Utami, Du Hongjian, Poh Leong (2025-07)
   A Comprehensive Experimental Investigation of Anisotropy Behavior on Highly Carbon-Minimized 3D Printed Concrete
6. Liu Ruiqing, Du Hongjian (2024-09)
   Improving Thermal Insulation Performance of 3D Printed Concrete Wall
7. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
   On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
8. Bong Shin, Du Hongjian (2024-06)
   Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
9. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
   Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
10. Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
    Inter-Layer Adhesion of 3D Printed Concrete:
    Influence of Layer Stacked Vertically
11. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
    Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
12. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-12)
    Influence of the Pore Feature on the Water-Uptake in 3D Printed Concrete
13. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
    Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
14. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
    Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
15. Yu Shiwei, Sanjayan Jay, Du Hongjian (2022-07)
    Effects of Cement Mortar Characteristics on Aggregate-Bed 3D Concrete Printing
16. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
    Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
17. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
    Correction
18. Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
    Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete
19. Yu Shiwei, Xia Ming, Sanjayan Jay, Yang Lin et al. (2021-07)
    Microstructural Characterization of 3D Printed Concrete
20. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
21. Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
    Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder
22. Yu Shiwei, Sanjayan Jay, Du Hongjian (2020-07)
    Impact of Particle-Size and Grading on Aggregate-Bed 3D Concrete Printing