2024-07¶

1. Pemas Sotirios, Sougioultzi Konstantina, Kouroutzidou Chrysoula, Stefanidou Maria et al. (2024-07)
   Enhancing Clay-Based 3D Printed Mortars with Polymeric Mesh Reinforcement Techniques
2. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Giridhar Greeshma et al. (2024-07)
   Structural Build-Up-Model for Three-Dimensional Concrete Printing Based on Kinetics-Theory
3. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2024-07)
   Investigating the Interaction of Limestone-Calcined-Clay and OPC-Based Systems with a Methylhydroxyethyl-Cellulose-Based Viscosity-Modifier Used for 3D Printable Concrete
4. Sovetova Meruyert, Calautit John (2024-07)
   Design, Calibration and Performance Evaluation of a Small-Scale 3D Printer for Accelerating Research in Additive Manufacturing in Construction
5. Baghi Ali, Aminpour Nima, Memari Ali, Bilén Sven et al. (2024-07)
   3D Concrete Printing of Self-Supported Filaments via Entrained Cables:
   Constructing Formwork-Free Spanning Structures
6. Rubeis Tullio, Ciccozzi Annamaria, Giusti Letizia, Ambrosini Dario (2024-07)
   On the Use of 3D Printing to Enhance the Thermal Performance of Building Envelope:
   A Review
7. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
   Advancing Sustainable Construction:
   Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
8. Huang Zili, Yang Weiyi, Verma Rupesh, Nguyen Giang et al. (2024-07)
   Application of Adelaide-University-Snapback-Indirect-Tensile-Test on 3D Printed Cement-Based Materials
9. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
   Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
10. Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
    Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
11. Jones Kathryn, Li Mo (2024-07)
    Life Cycle Assessment of Additively Manufactured Foundations for Ultratall Wind Turbine Towers
12. Peng Yiming, Unluer Cise (2024-07)
    Development of 3D Printed Magnesium-Silicate-Hydrate-Cement Mixes Involving Metakaolin as a Substitute for Silica-Source
13. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
    Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
14. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2024-07)
    Influence of Curing Conditions on the Shrinkage Behavior of Three-Dimensional Printed Concrete Formwork
15. Sucharda Oldřich, Gandel Radoslav, Cmiel Petr, Jeřábek Jan et al. (2024-07)
    Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies
16. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
    A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
17. Shahzad Qamar, Akbar Muhammad, Alzara Majed, Yosri Ahmed et al. (2024-07)
    Time-Dependent Buildability Evaluation of 3D Printed Concrete:
    Experimental Validation and Numerical Simulation
18. Liu Nana, Gan Qili, Tao Qin, Wang Jie (2024-07)
    Research on Materials for Concrete (Mortar) 3D Printing Fabricated Components
19. Souza Dias Leonardo, Anjos Marcos, Barbosa Marcella, Bezerra Ulisses (2024-07)
    Evaluation of Mix-Design Parameters Based on Basic Constitutive-Relationships for 3DCP Printing
20. Goidea Ana, Popescu Mariana, Johansson Anton, Andreén David (2024-07)
    Algorithmic Modeling of Functionally Graded Metamaterials in 3D Printed Building Envelopes
21. Kamakshi Tippabhotla, Thakur Manideep, Subramaniam Kolluru (2024-07)
    Formulating Printable Concrete Mixtures Based on Paste-Rheology and Aggregate-Content:
    Application to Alkali-Activated Binders
22. Sahai Rajan, Bisht Ravindra, Singh Siddharth, Panigrahi Soraj (2024-07)
    Design-Analysis and Development of a Gantry Robot for Multi-Layer 3D Concrete Printing with Simulation and Experimental Validation
23. Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
    Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete
24. Hanratty Niall, Khan Mehran, McNally Ciaran (2024-07)
    The Role of Different Clay Types in Achieving Low-Carbon 3D Printed Concretes
25. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
    Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
    From Yield-Stress , Viscosity and Surface Tension Point of View
26. Qiu Minghong, Qian Ye, Sun Yan, Leung Christopher (2024-07)
    Flexural Performance of Concrete Beams via 3D Printing Stay-in-Place Formwork Followed by Casting of Normal Concrete
27. Silva João, Wagner Gabriel, Silva Rafael, Morais António et al. (2024-07)
    Real-Time Precision in 3D Concrete Printing:
    Controlling Layer Morphology via Machine Vision and Learning Algorithms
28. Giwa Ilerioluwa, Kazemian Ali, Gopu Vijaya, Rupnow Tyson (2024-07)
    A Compressive Load-Bearing-Analysis of 3D Printed Circular Elements
29. Baktheer Abedulgader, Claßen Martin (2024-07)
    A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete
30. Zhang Nan, Sanjayan Jay (2024-07)
    Pumping-Less 3D Concrete Printing Using Quick Nozzle Mixing
31. Givkashi Mohammad, Tohidloo Mohammad (2024-07)
    The Effect of Freeze-Thaw-Cycles and Sulfuric-Acid-Attack Separately on the Compressive Strength and Microstructure of 3D Printed Air-Entrained Concrete
32. Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
    Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete
33. Mitrović Stefan, Vidović Milica, Ignjatović Ivan, Dragaš Jelena (2024-07)
    Experimental Testing of 3D Printed Concrete Truss-Girder
34. Mütevelli Özkan İffet, Aldemir Alper (2024-07)
    Machine-Learning Networks to Predict the Ultimate Axial Load and Displacement Capacity of 3D Printed Concrete Walls with Different Section Geometries
35. Kladovasilakis Nikolaos, Pemas Sotirios, Pechlivani Eleftheria (2024-07)
    Computer-Aided Design of 3D Printed Clay-Based Composite Mortars Reinforced with Bio-Inspired Lattice Structures
36. Malik Umair, Riaz Raja, Rehman Saif, Usman Muhammad et al. (2024-07)
    Advancing Mix-Design Prediction in 3D Printed Concrete:
    Predicting Anisotropic Compressive Strength and Slump-Flow
37. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
    Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
38. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2024-07)
    Granular Materials for 3D Printing of Construction Components and Structures
39. Babovic Neira, Laghi Vittoria, Kloft Harald (2024-07)
    Branching Structure for Reinforcement Anchorage Produced with Wire and Arc Additive Manufacturing Technique
40. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
    Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
41. Chen Zhaohui, Wang Zhenyue, Liao Minmao, Sun Junbo et al. (2024-07)
    Influence of Printing-Pattern on Bearing-Capacity of 3D Printed Concrete Hollow Structures
42. Dielemans Gido, Lachmayer Lukas, Khader Noor, Hack Norman et al. (2024-07)
    Robotic Repair:
    In-Place 3D Printing for Repair of Building Components Using a Mobile Robot
43. Dorresteijn Evelien, Tsiotou Sofia, Lowke Dirk (2024-07)
    Keeping the Processability of a Clay Mortar for Extrusion 3D Printing While Decreasing Shrinkage and Increasing the Green Strength
44. Geng Zifan, Zhang Lizhi, Wu Zhiwen, Tay Yi et al. (2024-07)
    Mechanical Properties and Additive Manufacturing of Alkali-Activated Lunar Regolith in Artificial Lunar Environments
45. Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
    Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
    Experimental and Numerical Studies
46. Gleiser Leonie, Pierer Robin, Markin Slava, Butler Marko et al. (2024-07)
    Additive Manufacturing with Earth-Based Materials:
    Minimization of Shrinkage Deformation
47. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
48. Guihéneuf Simon, Audren Mathieu, Lely Nathan, Borgne Tangi et al. (2024-07)
    Monitoring and Modeling of Formwork Pressure Exerted by Castable Earthen Materials
49. Jiang Fangming, Lin Manfang, Yu Kequan (2024-07)
    Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh
50. Kinomura Koji, Zhang Wenbo, Kawamura Keisuke (2024-07)
    Structural Performance of a Large Column with an Outer Shell Formed by Short-Fiber-Reinforced Mortar-Extrusion
51. Kloft Harald, Salamatian Ali, Gosslar Joschua, Dorresteijn Evelien et al. (2024-07)
    Robotic Rammed Earth-Concrete (RREC):
    A Novel Additive Manufacturing Technology to Strengthen Rammed Earth Structures by Integrated Rammed Concrete Parts
52. Li Bingying, Ding Tao, Qu Changwei, Liu Wei (2024-07)
    Modification of Fresh and Hardened Properties of 3D Printed Recycled Mortar by Superabsorbent Polymers
53. Liew Kim, Li Gen, Yin Binbin, Sun Jinhua et al. (2024-07)
    Structural Deterioration and Mechanical Degradation of Limestone-Calcined-Clay-Cement Under Elevated Temperature
54. Lim Sean, Tay Yi, Amr Issam, Fadhel Bandar et al. (2024-07)
    Carbon Sequestration with 3D Concrete Printing:
    Potentials and Challenges
55. Lin Xiqiang, Wang Hailong, Sun Xiaoyan, Kikhia Wael et al. (2024-07)
    Construction Technology of the Curved Mars House Digital Hotel Project in China Using Concrete 3D Printing
56. Liu Xuan, Chen Xianrui, Leung Gordon, Sham Ivan (2024-07)
    3D Printable Low-Carbon Concrete with Nano-Silica Pretreated Recycled Fine Aggregates
57. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
    Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
58. Lu Bing, Li Mingyang, Qian Shunzhi, Li King et al. (2024-07)
    High-Performance 3D Concrete Printing with Zeolite
59. Lv Zhenyuan, Duan Zhenhua, Xiao Jianzhuang, Ji Guangchao (2024-07)
    Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates:
    Material, Equipment and Performance
60. Mai (née Dressler) Inka, Gosslar Joschua, Khader Noor, Lowke Dirk et al. (2024-07)
    Workflow for Earth-Based 3D Printing
61. Markin Slava, Combrinck Riaan, Mechtcherine Viktor (2024-07)
    Specifics of Plastic Shrinkage in 3D Printed Concrete Elements
62. Markovic Ivan, Horat Alexandra, Pantellini Danilo (2024-07)
    Optimization of Earth-Based Mixtures in Terms of 3D Printability and Mechanical Properties:
    Feasibility Study
63. Mozaffari Salma, Kamravafar Rahasadat, Li Yunyan, Mata-Falcón Jaime et al. (2024-07)
    Leveraging Clay-Formwork 3D Printing for Reinforced-Concrete Construction
64. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-07)
    Set-on-Demand Geopolymer for Concrete 3D Printing Using Ternary Activator
65. Nghia Vuong, Lim Jian, Nam Nguyen, Lu Bing et al. (2024-07)
    Automated Force-Sensitive Reinforcement for 3DCP
66. Paquet Elodie, Furet Benoît, Perrot Arnaud (2024-07)
    3D Printed Raw Earth Structures to Create in Cities Vegetated Oasis of Coolness
67. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
68. Quah Tan, Tay Yi, Tan Ming, Li King (2024-07)
    Evaluation of Extrusion-Methods for 3D Concrete Printing
69. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
70. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-07)
    Application of Textile Reinforcement for 3D Concrete Printed Structures
71. Rehman Atta, Basha Shaik, Choi Kichang, Kang Manmin et al. (2024-07)
    An Analysis of Penetrometer-Test Methods for Structural Build-Up in Stiff and Accelerated 3D Concrete Printing Mixtures
72. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
73. Shao Lijing, Feng Pan, Liu Qi, Liu Zhaolong (2024-07)
    Improvements in the Printability of Printed Mortar Using In-Situ Polymerization
74. Shin Eun, Carcassi Olga, Maierdan Yierfan, Kawashima Shiho et al. (2024-07)
    Developing 3D Printed Natural Fiber-Rich Earth Materials in Construction
75. Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-07)
    CFD Simulation of Twin-Pipe Pumping Process for 3D Concrete Printing
76. Tay Yi, Soh Eugene, Ferrand Hortense, Tan Ming (2024-07)
    3D Printing of Large-Scale Biodegradable Material
77. Tay Yi, Wang Lining, Wang Xiangyu, Quah Tan et al. (2024-07)
    Integration of Functional Materials into 3D Printing for Construction
78. Teng Fei, Zhang Dong, Li Heng, Weng Yiwei (2024-07)
    Feasibility Study on Reinforcement Placement with a BIM-Enabled Collaborative Robot System
79. Trento Daniel, Faleschini Flora, Masoomi Maryam, Pellegrino Carlo et al. (2024-07)
    Additive Manufacturing for Earth-Based Materials:
    An Experimental Investigation
80. Wang Jinjin, Chen Cheng, Chu Tianwei, Jiang Liming et al. (2024-07)
    Experimental Study and OpenSees Modelling for Thermal Response of 3D Printed Concrete Exposed to Fires
81. Zhang Xiaoyue, Huang Wanru, Chen Zhaohui (2024-07)
    Mechanical Behavior Investigation for the Timber-UHPC Shear Connector in 3D Printed Concrete-Based Composite Beam
82. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
    Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
83. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
    Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
    An Exploratory Study
84. Cui Weijiu, Shen Liang, Ji Dongsheng, Liu Wenliang et al. (2024-07)
    Mechanical Performance and Permeability of Low-Carbon Printable Concrete
85. Hanifa Mohamad, Daruari Harish, Figueiredo Bruno, Mendonça Paulo (2024-07)
    Embodied Carbon of Structural Earthen Composites with Natural Materials and Byproducts Suitable for Robotic 3D Printing
86. Sovetova Meruyert, Calautit John (2024-07)
    Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures
87. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2024-07)
    CO2-Driven Additive Manufacturing of Sustainable Steel-Slag-Mortars
88. Asghari Y., Mohammadyan-Yasouj S., Petrů M., Ghandvar H. et al. (2024-07)
    3D Printing and Implementation of Engineered Cementitious Composites:
    A Review
89. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
    A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
90. Shao Lijing, Liu Zhaolong, Liu Qi, Wang Haochuan et al. (2024-07)
    A New Strategy to Enhance 3D Printability of Cement-Based Materials:
    In-Situ Polymerization
91. Li Xinyi, Gao Yuyue, Zhou Yan, Han Wenbin et al. (2024-07)
    A Review on Design and Construction of the Lunar Launch/Landing Infrastructure
92. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-07)
    Economic Analysis of Offsite and Onsite 3D Construction Printing Techniques for Low-Story Buildings:
    A Comparative Value-Stream-Assessment
93. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
    Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
94. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
    A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
    An Experimental and Numerical Approach
95. Wang Tingpeng, Mao Chao, Sun Bing, Li Zhiqiang (2024-07)
    Genealogy of Construction Robotics
96. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
    Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
97. Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
    Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
98. Parrott Brian, Coronado Preciado Angelica, Feron Eric (2024-07)
    Selective Sheet-Extrusion:
    A Novel Manufacturing-Process for Large-Format Material-Extrusion
99. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
100. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
     Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
101. Antorveza Paez Karen, Ling Andrea, Mahamaliyev Nijat, Bauer Georg et al. (2024-07)
     Digital Fabrication of Biologically Cemented Spatial Structures
102. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
     Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
103. Butkutė Karolina, Vaitkevičius Vitoldas, Adomaitytė Fausta (2024-07)
     Eco-Friendly 3D Printed Concrete Made with Waste and Organic Artificial Aggregates
104. Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
     Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
105. He Lewei, Chen Bingzhi, Liu Qimin, Chen Hao et al. (2024-07)
     A Quasi-Exponential Distribution of Interfacial Voids and Its Effect on the Inter-Layer Strength of 3D Printed Concrete
106. Nhieu Nhat-Luong, Dang Tri (2024-07)
     An Integrated T-Spherical Fuzzy Einstein Interaction Aggregator Group Decision-Making Approach:
     A Case Study of Concrete 3D Printing Robot Application in Vietnam
107. Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
     Selection of Digital Fabrication Technique in the Construction Industry:
     A Multi-Criteria Decision-Making Approach
108. Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
     Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites
109. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2024-07)
     Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
110. Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
     Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM
111. Bai Meiyan, Xiao Jianzhuang, Shen Jianyu, Ding Tao et al. (2024-07)
     Printability and Mechanical Anisotropy of 3D Printed Concrete with Manufactured Sand Derived from Basalt
112. Duarte Gonçalo, Brown Nathan, Duarte José (2024-07)
     Workflow for Generating, Simulating, and Optimizing Form and Tool-Path in 3D Concrete Printing of Vaults
113. Wang Jun, Zhang Xuanzheng, Liu Zhenhua, Zhao Jiasheng (2024-07)
     Study on the Effects of Printing Process and Reinforcement Materials on the Performance of 3D-Printed Glass Bead Insulation Mortar