Jia Zijian¶

1. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
   Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
2. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Approach and Main Results:
   Mechanical Properties of 3D Printed Concrete
3. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Compressive Strength and Modulus of Elasticity:
   Mechanical Properties of 3D Printed Concrete
4. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
   Flexural and Tensile Strength:
   Mechanical Properties of 3D Printed Concrete
5. Xia Kailun, Chen Yuning, Chen Yu, Jia Lutao et al. (2025-04)
   Programmable Toughening for 3D Printed Concrete and Architected Cementitious Materials
6. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
   Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
   Insights from Water Transport and Structural Evolution
7. Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
   In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
8. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
   The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
9. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
   Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
   From Material-Design to Structural Bearing-Capacity-Assessment
10. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
    Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
11. Liu Chao, Banthia Nemkumar, Shi Yifan, Jia Zijian et al. (2024-09)
    Early-Age Shrinkage Mitigation and Quantitative Study on Water Loss Kinetics of 3D Printed Foam-Concrete Modified with Superabsorbent Polymers
12. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
13. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
14. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
    Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
    From Yield-Stress , Viscosity and Surface Tension Point of View
15. Xia Kailun, Chen Yuning, Chen Yu, Jia Zijian et al. (2024-04)
    Understanding and Modeling the Plastic Deformation of 3D Printed Concrete Based on Viscoelastic Creep Behavior
16. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
    Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
17. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
    Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
18. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
19. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
    Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
    Insights from the Excess-Paste-Theory
20. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
    Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
    Characteristics and Influences of Superplasticizer and Water-Binder Ratio
21. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
22. Chen Yuning, Xia Kailun, Jia Zijian, Gao Yueyi et al. (2023-10)
    Extending Applicability of 3D Printable Geopolymer to Large-Scale Printing Scenario via Combination of Sodium Carbonate and Nano-Silica
23. Jia Zijian, Zhang Zedi, Jia Lutao, Cao Ruilin et al. (2023-09)
    Effect of Different Expansive Agents on the Early-Age Structural Build-Up Process of Cement-Paste
24. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
    Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
25. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
    3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
    Printability, Mechanical Properties and Pore-Structure
26. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
    Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
27. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
    Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
28. Zhang Chao, Jia Zijian, Wang Xianggang, Jia Lutao et al. (2022-05)
    A Two-Phase Design-Strategy Based on the Composite of Mortar and Coarse Aggregate for 3D Printable Concrete with Coarse Aggregate
29. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
    Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete