2023-03
- Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
- Markin Slava, Mechtcherine Viktor (2023-03)
Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation
- Seo Eun-A, Kim Won-Woo, Kim Sung-Wook, Kwon Hongkyu et al. (2023-03)
Mechanical Properties of 3D Printed Concrete with Coarse Aggregates and Polypropylene-Fiber in the Air and Underwater Environment
- Wang Li, Hu Yuanyuan, Wang Qiao, Cui Tianlong (2023-03)
Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D Printed Mortar
- Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2023-03)
3D Printed Concrete with Recycled Sand:
Pore-Structure and Triaxial Compression Properties
- Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
- Kazemian Ali, Seylabi Elnaz, Ekenel Mahmut (2023-03)
Concrete 3D Printing:
Challenges and Opportunities for the Construction Industry
- Kilic Ugur, Ma Ji, Baharlou Ehsan, Ozbulut Osman (2023-03)
Effects of Viscosity-Modifying Admixture and Nano-Clay on Fresh and Rheo-Viscoelastic Properties and Printability Characteristics of Cementitious Composites
- Panda Biranchi, Tran Jonathan (2023-03)
Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials
- Zahabizadeh Behzad, Segundo Iran, Pereira João, Freitas Elisabete et al. (2023-03)
Photocatalysis of Functionalised 3D Printed Cementitious Materials
- Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
- Ekanayaka Virama, Hürkamp André (2023-03)
Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
- Chen Wei-Ting, Sunny Anthraper Liya, Skevaki Eleni, Reiter Lex et al. (2023-03)
Imprinting Concrete Graded Transparency in 3D Concrete Printing Walls
- Huang Shuyi, Xu Weiguo, Yin Yudong (2023-03)
Improving the Overhang of 3D Printed Concrete Shells by Wrinkle Structures
- Wu Hao, Gu Sijia, Gao Xiaofan, Luo Jiaxiang et al. (2023-03)
Extrusion to Masoning:
Robotic 3D Concrete Printing of Concrete Shells as Building Floor System
- Chen Yanjuan, Kuva Jukka, Mohite Ashish, Li Zhongsen et al. (2023-03)
Investigation of the Internal Structure of Hardened 3D Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance
- Chen Yidong, Zhang Wenhua, Zhang Yunsheng, Zhang Yu et al. (2023-03)
3D Printed Concrete with Coarse Aggregates:
Built-In-Stirrup Permanent Concrete Formwork for Reinforced Columns
- Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
Computational Modeling of Fiber Orientation During 3D Concrete Printing
- Tamimi Adil, Alqamish Habib, Khaldoune Ahlam, Alhaidary Haidar et al. (2023-03)
Framework of 3D Concrete Printing Potential and Challenges
- Uddin Md, Mahamoudou Faharidine, Deng Boyu, Elobaid Musa Moneef et al. (2023-03)
Prediction of Rheological Parameters of 3D Printed Polypropylene-Fiber-Reinforced Concrete by Machine Learning
- Wang Ziyue, Chen Zixuan, Xiao Jianzhuang, Ding Tao (2023-03)
Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar
- Fonseca Mariana, Matos Ana (2023-03)
3D Construction Printing Standing for Sustainability and Circularity:
Material-Level Opportunities
- Qureshi Mohsin, Shiwazi Amira, Kindi Ghassan, Sawafi Bushra et al. (2023-03)
Development of Additive for Concrete 3D Printer by Using Local Materials
- Sun Bochao, Li Peichen, Wang Dianchao, Ye Jun et al. (2023-03)
Evaluation of Mechanical Properties and Anisotropy of 3D Printed Concrete at Different Temperatures
- Tahmasebinia Faham, Jabbari Amir, Skrzypkowski Krzysztof (2023-03)
The Application of Finite Element Simulation and 3D Printing in Structural Design Within Construction Industry 4.0
- Quah Tan, Tay Yi, Lim Jian, Tan Ming et al. (2023-03)
Concrete 3D Printing:
Process-Parameters for Process-Control, Monitoring and Diagnosis in Automation and Construction
- Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2023-03)
Developing 3D Printable and Buildable Limestone-Calcined-Clay-Based Cement Composites with Higher Aggregate Content
- Atkinson Cynthia, Aslani Farhad (2023-03)
Performance of 3D Printed Columns Using Self-Sensing Cementitious Composites
- Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
- Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition
- Giridhar Greeshma, Prem Prabhat, Jiao Dengwu (2023-03)
Effect of Varying Shear Rates at Different Resting Times on the Rheology of 3D Printable Concrete
- Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
- Bajpayee Aayushi, Farahbakhsh Mehdi, Zakira Umme, Pandey Aditi et al. (2023-03)
In-Situ Resource Utilization and Reconfiguration of Soils into Construction Materials for the Additive Manufacturing of Buildings
- Bester Frederick, Kruger Jacques, Zijl Gideon (2023-03)
Rivet Reinforcement for Concrete Printing
- Ding Tao, Wang Ziyue, Liu Haoran, Xiao Jianzhuang (2023-03)
Simulation on Pull-Out Performance of Steel-Bar from 3D Printed Concrete
- Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
From Transportation to Fabrication
- Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
- Talke Daniel, Saile Bettina, Meier Niklas, Herding Friedrich et al. (2023-03)
Particle-Bed 3D Printing by Selective Cement-Activation:
Influence of Process Parameters on Particle-Bed Density
- Onanuga Babajide, Biernacki Joseph (2023-03)
Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials
- Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete
- Cui Dong, Wu Yingxuan, Xie Xiaoying, Tian Guanfei et al. (2023-03)
Investigation on the Micro-Structure of a 3D Printed Mortar Through a Novel Leaching-Subsidiary Tomography
- Khan Shoukat, Koç Muammer (2023-03)
Buildability-Analysis of 3D Concrete Printing Process:
A Parametric Study Using Design of Experiment-Approach
- Chaiyotha Danai, Kantawong Watcharapong, Payakanitia Panjasila, Pinitsoontorn Supree et al. (2023-03)
Finding Optimized Conditions for 3D Printed High-Calcium Fly-Ash-Based Alkali-Activated Mortar
- Daadouch Koussay, Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
Computational Modeling of Fiber Orientation During 3D Concrete Printing
- Huber Tobias, Burger Joris, Mata-Falcón Jaime, Kaufmann Walter (2023-03)
Structural Design and Testing of Material-Optimized Ribbed RC Slabs with 3D Printed Formwork
- Kruger Jacques, Westhuizen Jean-Pierré (2023-03)
Investigating the Poisson Ratio of 3D Printed Concrete
- Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
- Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-03)
Improving Homogeneity of 3D Printed Cementitious Material-Distribution for Radial Tool-Path
- Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
Experimental and Numerical Analysis
- Ma Xiaosong, Tan Linzhen, Lu Yuanjing, Yao Wu et al. (2023-03)
Upcycling of Waste Plasterboard for the Synthesis of High-Quality Gypsum-Based 3D Printing-Powder
- Nair Avinash, Aditya S., Adarsh R., Nandan M. et al. (2023-03)
Additive Manufacturing of Concrete:
Challenges and Opportunities