Lloret-Fritschi Ena¶

1. Jenny David, Cutajar Sacha, Chan Yen-Fen, Jenny Ercan et al. (2026-01)
   Earth-to-Earth:
   Ultra-Thin 3D-Printed Clay Formwork for in-Situ Earth-Casting
2. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
   3D Printing of a Multi-Performative Facade:
   Assessment of Air Permeability, Water Tightness, Wind Loads, and Impact Resistance
3. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
   3D Printing of a Multi-Performative Building Envelope:
   Assessment of Air-Permeability, Water-Tightness, Wind-Loads, and Impact-Resistance
4. Amicarelli Fabio, Lloret-Fritschi Ena (2024-09)
   Optimising Concrete Slabs with Paper Formworks
5. Cutajar Sacha, Quadranti Elia, Lloret-Fritschi Ena (2024-09)
   3D Printed Earth Formworks for Concrete:
   Exploring Fabrication Feasibility for Complex Filler Slabs
6. Gürel Şeyma, Chen Wei-Ting, Wangler Timothy, Lloret-Fritschi Ena et al. (2024-09)
   Scaling up in Digital Casting of Concrete:
   Towards Industry Integration
7. Lloret-Fritschi Ena, Jenny Ercan, Jenny David (2024-09)
   A New Future of Construction:
   Digital Fabrication and Sustainability
8. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
   Static Mixing for Set-on-Demand of Digital Concrete
9. Lowke Dirk, Anton Ana-Maria, Buswell Richard, Jenny Ercan et al. (2024-09)
   Digital Fabrication with Concrete Beyond Horizontal Planar Layers
10. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
    Up-Scaling Earth Formworks:
    3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
11. Burger Joris, Lloret-Fritschi Ena, Akerman Marc, Schwendemann Daniel et al. (2023-11)
    Circular Formwork:
    Recycling of 3D Printed Thermoplastic Formwork for Concrete
12. Jami Guillaume, Jenny Ercan, Wei Chenguyan, Forsythe Hamilton et al. (2023-07)
    4D Formwork for Robotic Concrete Spraying
13. Lloret-Fritschi Ena, Choma Joseph, Scotto Fabio, Szabó Anna et al. (2023-02)
    In-Crease:
    Less Concrete More Paper
14. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
    Eggshell Pavilion:
    A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
15. Jenny Ercan, Pietrasik Lukasz, Sounigo Eliott, Tsai Ping-Hsun et al. (2022-11)
    Continuous Mobile Thin-Layer On-Site Printing
16. Frangez Valens, Taha Nizar, Feihl Nicolas, Lloret-Fritschi Ena et al. (2022-10)
    Geometric Feedback System for Robotic Spraying
17. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
    Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
18. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
19. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
    Robotic On-Site Adaptive Thin-Layer Printing:
    Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
20. Sitnikov Vasily, Kitani Lena, Maneka Artemis, Lloret-Fritschi Ena et al. (2022-06)
    Design and Fabrication of Spatially Graded Concrete Elements with Ice Aggregate Method
21. Jenny Ercan, Lloret-Fritschi Ena, Jenny David, Sounigo Eliott et al. (2022-06)
    Robotic Plaster Spraying:
    Crafting Surfaces with Adaptive Thin-Layer Printing
22. Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
    Additive Digital Casting:
    From Lab to Industry
23. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
    Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
    Exploring Reinforcement-Strategies and Optimization
24. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
25. Frangez Valens, Lloret-Fritschi Ena, Taha Nizar, Gramazio Fabio et al. (2021-10)
    Depth-Camera-Based Rebar Detection and Digital Reconstruction for Robotic Concrete Spraying
26. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
    Material-Informed Formwork Geometry:
    The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
27. Jenny Ercan, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias (2020-11)
    Crafting Plaster through Continuous Mobile Robotic Fabrication On-Site
28. Graser Konrad, Baur Marco, Apolinarska Aleksandra, Dörfler Kathrin et al. (2020-09)
    DFAB House:
    A Comprehensive Demonstrator of Digital Fabrication in Architecture
29. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
    Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
    Ultra-Thin, 3D Printed Formwork
30. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
31. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
    ACDC:
    The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
32. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
33. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2020-04)
    Mastering Yield-Stress-Evolution and Formwork-Friction for Smart Dynamic Casting
34. Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
    Eggshell:
    Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
35. Szabó Anna, Lloret-Fritschi Ena, Reiter Lex, Gramazio Fabio et al. (2019-09)
    Revisiting Folded Forms with Digital Fabrication
36. Taha Nizar, Walzer Alexander, Ruangjun Jetana, Bürgin Theophil et al. (2019-09)
    Robotic AeroCrete:
    A Novel Robotic Spraying and Surface Treatment Technology for the Production of Slender Reinforced Concrete Elements
37. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
    Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture
38. Wangler Timothy, Scotto Fabio, Lloret-Fritschi Ena, Flatt Robert (2019-09)
    Residence-Time-Distributions in Continuous Processing of Concrete
39. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
40. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
    Adapting Smart Dynamic Casting to Thin-Folded Geometries
41. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
42. Lloret-Fritschi Ena, Reiter Lex, Wangler Timothy, Gramazio Fabio et al. (2017-03)
    Smart Dynamic Casting:
    Slipforming with Flexible Formwork
43. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
    Digital Concrete:
    Opportunities and Challenges
44. Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
    Complex Concrete Structures:
    Merging Existing Casting Techniques with Digital Fabrication
45. Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias, Langenberg Silke (2013-05)
    Complex Concrete Constructions:
    Merging Existing Casting Techniques with Digital Fabrication