2025-09¶

1. Bu Dechao, Zhang Jiawei, Wu Gan, Xia Zixu et al. (2025-09)
   Impact Performance of 3D Printed ECC Inspired by Biological Bouligand Structure
2. Li Zhengrong, Xing Wenjing, Sun Jingting (2025-09)
   Heat Transfer Calculation and Correction for 3D Printed Walls Incorporating Surface Geometry Effects
3. Rahman Mahfuzur, An Dong, Rawat Sanket, Yang Richard et al. (2025-09)
   Development of Green 3D Printable Cementitious Composites Using Multi-Response Optimisation Method
4. Thajeel Marwah, Chalawi Ameen, Balázs György (2025-09)
   Printability and Strength of 3D-Printed Concrete:
   Role of Mix Design and Printing Parameters
5. Válek Josef, Romanová Dorota (2025-09)
   3D Concrete Printing Simulating Device in Comparison to Real Printing and Aggregate Substitutes
6. Akter Usmi, Rezvi Syed, Ratul Md., Kishor Saad (2025-09)
   Optimization of Data-Driven Ensemble Models Using Firefly Algorithm for Enhanced 3D Printed Concrete Strength Prediction
7. Liu Han, Sousa Israel, Laflamme Simon, Doyle Shelby et al. (2025-09)
   Embedment of 3D Printed Self-Sensing Composites for Smart Cementitious Components
8. Paritala Spandana, Raj Shubham, Singh Prashant, Subramaniam Kolluru (2025-09)
   Designing 3D Printable Concrete by Integrating the Influence of Aggregate Characteristics
9. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-09)
   From Qualitative Diagnosis to Adaptive Compensation for Filament Imperfections During On-Site Robotic 3D Printing
10. Zhang Junyi, Zhang Chao, Zhang Yuying, Li Muduo et al. (2025-09)
    Designing Printable Cement Composites with Porous Biochar Using an Extended Water Film Thickness Theory
11. Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
    Recycled Components in 3D Concrete Printing Mixes:
    A Review
12. Philip Nivin, Jędrzejewska Agnieszka, Mathew Ashitta, Uthuppan Susan (2025-09)
    Steel Fiber Reinforcement for Improved Structural Performance and Durability of 3D Printed Mortar in Marine Environments
13. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
    Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
14. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2025-09)
    Investigating the Impact of Material Rheology on Geometric Accuracy in 3D Concrete Printing Using Real-Time Monitoring
15. Liu Renlong, Tang Jiyu, Feng Hu, Cheng Zhangqi (2025-09)
    Study on the Instability of Early Age 3D Printing Cement-Based Structure:
    Considering the Influence of Interface
16. Sun Yan, Mudasir Maryam (2025-09)
    3D Printing Performance of Strain-Hardening Cementitious Composites with Different UHMWPE Fibers in Correlation with Rheology
17. Yamakawa Soji, Vazquez-Santiago Kyshalee, Xia Yixuan, Ogura Hiroki et al. (2025-09)
    Concrete Spray 3D Printing Simulator for Nozzle Trajectory Planning
18. Jesus Manuel, Dias Ricardo, Teixeira João, Delgado João et al. (2025-09)
    Optimisation of 3D Printable Cement- and Lime-Based Mortars for Built Heritage Rehabilitation
19. Li Shuai, Corelli Jaide, Tran Jonathan, Fan Linhua (2025-09)
    3D Printable Cellulose Concrete:
    A Review and Pathway to Future Research
20. Safdar Gardezi Syed, Tanyildizi Harun, Haroglu Hasan, Coskun Ahmet (2025-09)
    Acid Attack Performance of 3D Printing Nano-ZnO Modified Geopolymer Mortar
21. Schönsee Eric, Hüsken Götz, Kocherla Amarteja, Strangfeld Christoph (2025-09)
    A Framework for Characterising the Reflection Intensity of a 3D-CP Mortar
22. Xie Xiangyu, Liu Xuemei, Zhang Nan, Zhang Lihai et al. (2025-09)
    Capillary Extrusion Rheometry for Characterising Wall Slip Behaviour in 3D Printed Concrete
23. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
    Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
    Rheology, Strength, and Anisotropy
24. Fahim Abdullah, Bukhari Syed, Khanzadeh Moradllo Mehdi (2025-09)
    Additive Manufacturing of Carbonatable Ternary Cementitious Systems with Cellulose Nanocrystals
25. Mahdy Deena, Sameh Hazem, Fekry Mayar (2025-09)
    Structural Stability of 3D-Printed Earthen Catenary Domes:
    Experimental and Analytical Insights
26. Rabul H., Prem Prabhat, Ravichandran Darssni, Rathan RT Arjun (2025-09)
    Development of Fly Ash and Limestone Calcined Clay-Based Mixtures for Concrete 3D Printing
27. Lee Chang-Hwan, Gwak Kwan-Woong (2025-09)
    Experimental Validation of a Cable Driven Parallel Robot for 3D Printing Building Construction
28. Mansouri Abraham, Alsuwaidi Abdulla, Binali Alreem, Binshaqooi Essa et al. (2025-09)
    Conjugate Heat Transfer and U Value Analysis of 3D Concrete Printed Envelopes with Variable‐Thickness Air Cavities in Hot‐Arid Climates
29. Si Wen, Hopkins Ben, Khan Mehran, McNally Ciaran (2025-09)
    Towards Sustainable Mortar:
    Optimising Sika-Fiber Dosage in Ground Granulated Blast Furnace Slag and Silica Fume Blends for 3D Concrete Printing
30. Anwar Muhammad, Zhu Xingyi, Zhang Yating, Wang Jiakang et al. (2025-09)
    Synergistic Effects of Microwave Curing Regimes on Early, Mid, and Long-Term Strengths and Microstructural Performance of Fly Ash-Slag Based 3D-Printed Geopolymers
31. Babajaniniashirvani Vida, McCoy Andrew, Afsari Kereshmeh (2025-09)
    Challenges and Opportunities of 3DCP Adoption for US Workforce Training
32. Singh Amardeep, Yang Song, Wang Dianchao, Xiao Jianzhuang et al. (2025-09)
    Critical Threshold Fiber Content for Freeze-Thaw Resistance in 3D-Printed Concrete
33. Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
    Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
34. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Chen Weihua (2025-09)
    Integrated Non-Destructive Assessment of 3D Printed UHPC Microstructure Using X-Ray Computed Tomography and Ultrasonic Waves
35. Chen Baixi, Yang Lei, Jiang Sheng (2025-09)
    Stochastic Analysis of 3D Concrete Printing Process with Curvature and Inclination by Explainable Data-Driven Modelling
36. Maroszek Marcin, Rudziewicz Magdalena, Rusin-Żurek Karina, Hager Izabela et al. (2025-09)
    Recycled Materials and Lightweight Insulating Additions to Mixtures for 3D Concrete Printing
37. Matos Ana, Emiroğlu Mehmet, Milheiro-Oliveira Paula (2025-09)
    Predicting Stabilized Soil Mixture Proportions for 3D Printing:
    Preliminary Study Using the Design of Experiments Approach
38. Piechówka-Mielnik Magdalena, Bednarz Łukasz, Krupa Michał, Wojciechowska Gabriela et al. (2025-09)
    Sustainable Development in Building Engineering:
    Hempcrete in 3D Printing Technology
39. Tarhan Yeşim, Atalay Berrin (2025-09)
    Phosphogypsum and Borogypsum as Additives for Sustainable and High-Performance 3D-Printable Concrete
40. Yang Rijiao, Xu Chengji, You Xiufei, Li Xinze et al. (2025-09)
    Saddle Stitching-Enabled Interfacial Toughening in 3D Printed Concrete
41. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
42. Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
    Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites
43. Wang Li, Fan Haichen, Wang Qiang, Bai Gang et al. (2025-09)
    Design Method and Force Transmission Mechanism of 3D Printed Concrete Truss Beams Reinforced with 3D Conical Reinforcement
44. Xu Bin, Sun Zhaoyang, Sun Ming, Chen Binmeng (2025-09)
    Realizing Rheological Manipulation by Adjusting Initiator Concentrations for In-Situ Polymerization:
    Towards 3D Concrete Printing Applications
45. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
    Advances in Sustainable 3D-Printed Geopolymer Concrete:
    Materials, Performance, and Environmental Impact in Next Generation Green Construction
46. Lopes de Aquino Brasil Alexander, Carmo Pena (2025-09)
    A Systematic Review of Robotic Additive Manufacturing Applications in Architecture, Engineering, and Construction
47. Tarhan İsmail, Tarhan Yeşim (2025-09)
    Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
    Experimental Mix Design and Numerical Structural Assessment
48. Mawas Karam, Maboudi Mehdi, Gerke Markus (2025-09)
    A Review on Geometry and Surface Inspection in 3D Concrete Printing
49. Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
    Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
    A Review
50. Kua Harn, Shi A., Kajandran V., Lam T. et al. (2025-09)
    Toward Sustainable Construction 3D Printing:
    Limestone and Non-Calcined Recycled Marine Clay as Partial Cement Replacement
51. Alonso-Cañon Sara, Blanco-Fernandez Elena, Cuesta-Astorga Eva, Indacoechea-Vega Irune et al. (2025-09)
    Selection of the Best 3D Printing High-Performance Mortars Using Multi-Criteria Analysis
52. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
53. Gulia Preeti, Dogra Sourabh, Gupta Arpan, Boddepalli Uday et al. (2025-09)
    Building a Metamaterial Slab with Gosper Curve
54. Kim-Tackowiak Hajin, Carstensen Josephine (2025-09)
    Topology Optimization of 3D-Printed Material Architectures:
    Testing Toolpath Consideration in Design
55. Kim Ki-Yeol, Lim Dong-Kyu, Choi Myoungsung (2025-09)
    Comparison of Pumping Mechanism for Various Cementitious Materials
56. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
    Bauxite Residue-Based 3D Printing Mortar:
    Enhancing Performance and Sustainability Through the Paste Replacement Approach
57. Liu Ruiqing, Du Hongjian (2025-09)
    Optimizing Thermal Insulation Through Geometric Design:
    Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
58. Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
    Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
    A Finite Element Modeling Strategy
59. Yousaf Arslan, Rashid Ans, Koç Muammer (2025-09)
    Additive Manufacturing for Vernacular Architecture Using Local Earthen Soil and Bio-Waste Materials
60. Sabouni Reem, Martini Samer (2025-09)
    Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties
61. Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
    Industrial Waste in 3D Printed Concrete:
    A Mechanistic Review on Rheological Control and Printability
62. Luo Surong, Jin Wenhao, Zhang Zhaorui, Zhang Kaijian (2025-09)
    Constitutive Relationship of 3D Printed Fiber Reinforced Recycled Sand Concrete Under Uniaxial Compression
63. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
    Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
    A Case Study in China
64. Xing Wenjing, Li Zhengrong (2025-09)
    Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
    A Multiscale Computational Approach
65. Gencel Osman, Nodehi Mehrab, Subaşı Serkan, Ustaoğlu Abid et al. (2025-09)
    Properties of 3D Printed Concrete Containing Microencapsulated Phase Change Material
66. Jiang Youbau, Wen Jun, Gao Pengxiang, Liu Yan et al. (2025-09)
    Effect of Graphene Oxide on Physical and Mechanical Properties of 3D Printed Concrete
67. Leong Wai (2025-09)
    Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
68. Sikora Paweł (2025-09)
    Globally First 3D‐Printed Concrete Drinking Water Tank in Barczewko, Poland
69. Arumugam Girirajan, Kusumo Camerlia May Li, Mari Tamil (2025-09)
    Impact of Bioinspired Infill Pattern on the Thermal and Energy Efficiency of 3D Concrete Printed Building Envelope
70. Ramirez Rodriguez Fatima, Ahmad Rafiq (2025-09)
    Sustainable Technology Advances for Additive Construction:
    A State-of-the-Art Review
71. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
    Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
    Small- to Medium-Scale Wall Experiments
72. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
    Development of Sustainable 3D Printing Concrete Materials:
    Impact of Natural Minerals and Wastes at High Replacement Ratios
73. Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
    Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
74. Du Guoqiang, Deng Xiaowei, Qian Ye (2025-09)
    Biomimetic 3D Printed Herringbone-Bouligand Cementitious Composites for Ultra-High Impact Performance
75. Mousavi Moein, Rangaraju Prasad (2025-09)
    Freeze-Thaw Durability of 3D Printed Concrete:
    A Comprehensive Review of Mechanisms, Materials, and Testing Strategies
76. Chortis Alexandros, Gkountas Charalampos, Melidis Lazaros, Katakalos Konstantinos (2025-09)
    Seismic Performance Evaluation of 3D-Printed Concrete Walls Through Numerical Methods
77. Kubjana Lucy, Aigbavboa Clinton, Adekunle Peter (2025-09)
    Advancing Sustainable 3D-Printed Concrete:
    A Bibliometric Study on Financing Housing Options
78. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
    Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
79. Marco Giancarlo, Cheung Lok (2025-09)
    Multimodal Large Language Models for Adaptive 3D Concrete Printing:
    Real-Time Control of Materials and Settings According to Performance Requirements and Environmental Conditions
80. Marco Giancarlo, Lombardi Davide, Dounas Theodoros, Agkathidis Asterios (2025-09)
    A Theoretical Framework for the Standardisation and Industrialisation of 3D Concrete Printing Through Decentralised Science
81. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2025-09)
    Influence of Rheology Modifying Admixtures on the Buildability of 3D Printing Cement-Based Mortars
82. Sari Mustika, Berawi Mohammed, Taswin William, Saroji Gunawan et al. (2025-09)
    Work Breakdown Structure and Construction Process Framework for a Hybrid 3D-Printed Modular Building
83. Vollmert Jasper, Peralta Patricia, Alatassi Adel, Chmelnizkij Alexander et al. (2025-09)
    Towards Structural Health Monitoring of Clay-Printed Structures
84. Bhagat Rajesh, Pande Prashant, Madurwar Kamlesh, Raut Jayant et al. (2025-09)
    Life Cycle Assessment of 3D-Printed Building Materials Towards Sustainability-Driven Optimization and Environmental Impact Analysis Using Computational Intelligence Techniques
85. Keller Petr, Mendřický Radomír (2025-09)
    Analysis of Object Deformations Printed by Additive Manufacturing from Concrete Mixtures over Time
86. Lian Hongqian, Ding Tao (2025-09)
    Deformation of Inclined Concrete 3D Printing:
    A Computational Fluid Dynamics Analysis
87. Safanelli Nicollas, Schackow Adilson, Effting Carmeane, Matos Paulo (2025-09)
    The Effect of Crystalline Nanocellulose on the Rheology, Hydration of Cement Pastes, and Buildability of 3D-Printed Concrete
88. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
89. Syed Sajid, Abid Khasim, Khan Majid (2025-09)
    An Interpretable Machine Learning Approach for Predicting Reinforcement Bond Performance in 3D Concrete Printing
90. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
    Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
91. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2025-09)
    Behavior of 3D Printed Concrete Walls Exposed to High Temperatures
92. Maurya Shubham, Kumar Vijay, Panda Biranchi, Borsaikia Arun et al. (2025-09)
    Inline Polymer Cable Reinforcement in 3D Concrete Printing with a Special Nozzle
93. Rabiei Mahsa, Moini Mohamadreza (2025-09)
    Extrusion Under Material Uncertainty with Pressure-Based Closed-Loop Feedback Control in Robotic Concrete Additive Manufacturing
94. Sahu Akshay, Sharma Deepak, Panda Biranchi (2025-09)
    Tailoring Topology-Optimized Lightweight Concrete Beam Design for Additive Manufacturing
95. Saravanan Pradeep, Ramaswamy Ananth (2025-09)
    Early Age Creep Behavior of 3D Printable Mortar:
    Hydration and Viscoelasticity Coupling Model
96. Barbhuiya Salim, Das Bibhuti, Adak Dibyendu (2025-09)
    Key Variables Influencing the Performance of 3D Printed Concrete:
    A Comprehensive Analysis
97. Mararo Ian, Babafemi Adewumi, Aigbavboa Clinton (2025-09)
    Towards Understanding the Perceptions of 3D Construction Printing in Kenya
98. Rahman S., Khair Sanjida, Shaikh Faiz, Sarker Prabir (2025-09)
    Decarbonized 3D Printed Concrete Incorporating Lithium Slag and PVA Fiber:
    Buildability, Mechanical, and Microstructural Insights
99. Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
    Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
    Current Status and Future Prospects