Gebhard Lukas¶

1. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
   Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
2. Ammann Rebecca, Gebhard Lukas, Thoma Karel, Mata-Falcón Jaime et al. (2024-09)
   Environmental Benefits of Concrete Floor Slabs Produced with Digitally Fabricated Formworks:
   A Case Study
3. Jipa Mihail-Andrei, Anton Ana-Maria, Gebhard Lukas, Dillenburger Benjamin (2024-09)
   The Nubian Slab:
   3D Concrete Printed Stay-in-Place Formwork for Vaulted Slabs
4. Soto Alejandro, Gebhard Lukas, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-09)
   Structural Testing Campaign for a 30 m Tall 3D Printed Concrete Tower
5. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
   Enhancing Structural Efficiency with Digital Concrete:
   Principles, Opportunities and Case Studies
6. Anton Ana-Maria, Lin Che, Skevaki Eleni, Wang Mingyang et al. (2024-04)
   Tor Alva:
   A 3D Concrete Printed Tower
7. Mata-Falcón Jaime, Gebhard Lukas, Lee Minu, Bischof Patrick (2023-10)
   Advances in Structural Applications of Digital Fabrication With Concrete
8. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
   Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
   A Case Study on Water Tanks
9. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
   Digitally Fabricated Ribbed Concrete Floor Slabs:
   A Sustainable Solution for Construction
10. Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
    Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements
11. Gebhard Lukas, Bischof Patrick, Anton Ana-Maria, Mata-Falcón Jaime et al. (2022-06)
    Pre-Installed Reinforcement for 3D Concrete Printing
12. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
    Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
    Exploring Reinforcement-Strategies and Optimization
13. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
    Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
14. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
    Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
15. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
    Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
16. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
17. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
18. Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
    Eggshell:
    Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures