Skip to content

Unluer Cise

Information

ORCID
0000-0001-5207-5993
First Contribution
2018-10-05
Last Contribution
2024-07-25
Number Contributions
13
Number Citations
1090

Top Co-Authors

  1. Tan Ming (7)
  2. Panda Biranchi (6)
  3. Peng Yiming (4)
  4. Ruan Shaoqin (3)
  5. Yang En-Hua (2)

Top Cited Articles

  1. Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
    Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing (275)

Persons This Author Cites the Most

  1. Tan Ming (62)
  2. Panda Biranchi (51)
  3. Paul Suvash (33)
  4. Tay Yi (32)
  5. Roussel Nicolas (25)

Persons This Author Is Cited Most By

  1. Panda Biranchi (44)
  2. Sanjayan Jay (40)
  3. Chen Yu (33)
  4. Schlangen Erik (31)
  5. Tran Jonathan (31)

  1. Peng Yiming, Unluer Cise (2024-07)
    Development of 3D Printed Magnesium-Silicate-Hydrate-Cement Mixes Involving Metakaolin as a Substitute for Silica-Source
  2. Peng Yiming, Unluer Cise (2024-06)
    Performance and Microstructural Development of 3D Printable MgO-SiO2 Mixes Containing Magnesium-Silicate-Monohydrate
  3. Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
    Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall
  4. Peng Yiming, Unluer Cise (2024-04)
    Understanding the Rheological Behavior of Reactive Magnesia-Metakaolin System in the Context of Digital Construction
  5. Chu Shaohua, Yang En-Hua, Unluer Cise (2023-01)
    Development of Nanofiber-Reinforced Reactive Magnesia-Based Composites for 3D Printing
  6. Peng Yiming, Unluer Cise (2022-12)
    Development of Alternative Cementitious Binders for 3D Printing Applications:
    A Critical Review of Progress, Advantages and Challenges
  7. Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
    Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications
  8. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
    Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing
  9. Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
    Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing
  10. Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
    Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing
  11. Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
    Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing
  12. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay
  13. Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
    Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing