2023-11
- Alyami Mana, Khan Majid, Fawad Muhammad, Nawahz R. et al. (2023-11)
Predictive Modeling for Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Machine Learning Algorithms
- Ambily Parukutty, Rajendran Neeraja, Kaliyavaradhan Senthil (2023-11)
Mix-Design, Optimization and Performance-Evaluation of Extrusion-Based 3D Printable Concrete
- Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
- Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
- Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2023-11)
Constitutive Response and Failure Progression in Digitally Fabricated 3D Printed Concrete Under Compression and Their Dependence on Print Layer-Height
- Peralta Abadi Patricia, Ahmad Muhammad, Smarsly Kay (2023-11)
Printing-Information-Modeling for Additive Manufacturing of Concrete Structures
- Wang Qiang-Chen, Yu Si-Nan, Chen Zi-Xiao, Weng Yiwei et al. (2023-11)
Promoting Additive Construction in Fast-Developing Areas:
A Q-Methodology-Analysis of Stakeholder-Perspectives on Policy-Mixes
- Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
Additive Construction Using Enhanced Earthen-Based Composites:
Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
- Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2023-11)
Propelling the Widespread Adoption of Large-Scale 3D Printing
- Bedarf Patrick, Szabó Anna, Zanini Michele, Dillenburger Benjamin (2023-11)
Robotic 3D Printing of Geopolymer Foam for Lightweight and Insulating Building Elements
- Bosbach Sven, Kalthoff Matthias, Cruz Cynthia, Adam Viviane et al. (2023-11)
Digital Prefabrication of Lightweight Building Elements for Circular Economy:
Material-Minimised Ribbed Floor Slabs Made of Extruded Carbon Reinforced Concrete (ExCRC)
- Chen Yu, Rahmani Hossein, Schlangen Erik, Çopuroğlu Oğuzhan (2023-11)
An Approach to Develop Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Calcium-Nitrate
- Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2023-11)
Development of a Prototype Concept for Using 3D Concrete Printing in Pavement Construction
- Põldaru Mattias, Tammkõrv Karl, Tusik Tanel, Kiviste Mihkel et al. (2023-11)
The Effect of Printing-Direction on the Strength Characteristics of a 3D Printed Concrete Wall-Section
- Khan Mehran, McNally Ciaran (2023-11)
A Holistic Review on the Contribution of Civil Engineers for Driving Sustainable Concrete Construction in the Built Environment
- Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
- Wang Xianlin, Banthia Nemkumar, Yoo Doo-Yeol (2023-11)
Reinforcement Bond Performance in 3D Concrete Printing:
Explainable Ensemble Learning Augmented by Deep Generative Adversarial Networks
- Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-11)
Adaptive Estimation and Detection of Filament-Width-Deviation During 3D Robotic Printing of Construction Materials
- Li Long, Hao Lucen, Li Xiao-Sheng, Xiao Jianzhuang et al. (2023-11)
Development of CO2-Integrated 3D Printing Concrete
- Vignesh B., Parthasarathi N. (2023-11)
Analytical Study on 3D Printed Concrete Wall with Different Wall-Configurations When Exposed to High Temperature
- Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar
- Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-11)
Slag-Modified Metakaolin-Based 3D Printed Geopolymer:
Mechanical Characterisation, Microstructural Properties, and Nitrogen Physisorption Pore-Analysis
- Jauk Julian, Vašatko Hana, Gosch Lukas, Ristoski Kristijan et al. (2023-11)
Coextrusion of Clay-Based Composites:
Using a Multi-Material Approach to Achieve Gradient Porosity in 3D Printed Ceramics
- Liu Qiong, Cheng Shengbo, Sun Chang, Chen Kailun et al. (2023-11)
Steel-Cable Bonding in Fresh Mortar and 3D Printed Beam Flexural Behavior
- Wu Hao, Li Yu, Xie Xingje, Gao Xiaofan et al. (2023-11)
Structural Performance-Based 3D Concrete Printing for an Efficient Concrete Beam
- Burger Joris, Lloret-Fritschi Ena, Akerman Marc, Schwendemann Daniel et al. (2023-11)
Circular Formwork:
Recycling of 3D Printed Thermoplastic Formwork for Concrete
- Benros Deborah, Hashemi Arman, Yungshen Su, Dungrani Mohan (2023-11)
Micro-House Using Robotic Manufacturing
- Chernysheva Natalia, Shatalova Svetlana, Lesovik Valeriy, Kozlov Pavel (2023-11)
Deformation Characteristics of Dense and Foamed Mortars Based on Cement and Gypsum-to-Cement Binders for 3D Printing
- Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
Proposal for an Innovative and Sustainable Construction System
- Dimitriou Savvas, Kontovourkis Odysseas (2023-11)
Force-Flow Based 3D Printing of Structural Elements Inspired by the Traditional Architecture of Cross-Vaults
- Diniz Nancy, Melendez Frank (2023-11)
Myco Clay:
3D Printing Mycelium and Clay Biocomposites
- Zhu Wenxuan, Zhu Shidong, Li Wangxin, Zhang Yu et al. (2023-11)
A Study on the Printability of Manufactured Sand Concrete
- Fiala Lukáš, Lin Wei-Ting, Hotěk Petr, Cheng An (2023-11)
Feasibility Study of Developing Cementless Blended Materials as 3D Printable Materials
- Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
- Maierdan Yierfan, Armistead Samuel, Mikofsky Rebecca, Huang Qiqi et al. (2023-11)
Rheology and 3D Printing of Alginate Bio-Stabilized Earth Concrete
- Wang Yu, Rodriguez Fabian, Olek Jan, Zavattieri Pablo et al. (2023-11)
Influence of Type of Fibers on Fresh and Hardened Properties of Three-Dimensional-Printed Cementitious Mortars
- Bui Van-Bien, Pham Thi, Pham Duc, Do Thi (2023-11)
Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1
- Lu Bing, Li Ziyang, Li Mingyang, Feng Jianhang et al. (2023-11)
Substitution of Cement by Marine-Clay in Spray-Based 3D Concrete Printing
- Xu Ping, Chen Tianyu, Fan Kaijun, Zhang Minxia (2023-11)
Effect of Nano-Silica-Sol Dosage on the Properties of 3D Printed Concrete
- Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
Advancing 3D Concrete Printing for Affordable Housing:
A Shape Grammar-Based Approach to Print Spanning-Roof Structures
- Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
- Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections
- Fu Yanan, Zhang Ying, Wu Lei (2023-11)
Experimental Study on Structural Performance of Cast-in-Place Frame Printed Concrete Wall
- Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
- Braumann Johannes, Singline Karl, Schwab Martin (2023-11)
Visual Programming for Robot-Control:
Technology Transfer Between AEC and Industry
- Carbone Carlo, Mohamed Basem (2023-11)
From Analogue to Digital:
Evolution of Building Machines Towards Reforming Production and Customization of Housing
- Eversmann Philipp, Rossi Andrea (2023-11)
Towards Construction 4.0:
Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
- Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing
- Naboni Roberto, Zomparelli Alessandro, Kunic Anja, Breseghello Luca (2023-11)
Design, Robotic Fabrication and Augmented Construction of Low-Carbon Concrete Slabs Through Field-Based Reaction-Diffusion
- Sangiorgio Valentino, Parisi Fabio, Graziano Angelo, Tina Giosmary et al. (2023-11)
3D Printing of Viscous Materials in Construction:
New Design Paradigm, from Small Components to Entire Structures
- An Dong, Zhang Yixia, Yang Chunhui (2023-11)
Numerical Modelling of 3D Concrete Printing:
Material-Models, Boundary-Conditions and Failure-Identification
- Tamimi Adil, Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Alhaidary Haidar et al. (2023-11)
Thermal Performance of 3D Concrete Printed Walls:
Calculated and In-Situ Measured U-Values
- Bhusal Shiva, Sedghi Reza, Hojati Maryam (2023-11)
Evaluating the Printability and Rheological and Mechanical Properties of 3D Printed Earthen Mixes for Carbon-Neutral Buildings
- Gao Huaxing, Chen Yuxuan, Chen Qian, Yu Qingliang (2023-11)
Thermal and Mechanical Performance of 3D Printing Functionally Graded Concrete:
The Role of SAC on the Rheology and Phase Evolution of 3DPC
- Tong Jiaqi, Ding Yahong, Lv Xiuwen, Ning Wei (2023-11)
Effect of Carbonated Recycled Coarse Aggregates on the Mechanical Properties of 3D Printed Recycled Concrete
- Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
Material-Preparation, Construction-Process and Structure-Level
- Zou Mengtong, Liu Chuanbei, Zhang Keying, Li Wuqian et al. (2023-11)
Evaluation and Control of Printability and Rheological Properties of 3D Printed Rubberized Concrete
- Henschen Jacob, Blood Daniel, Kawashima Shiho, Kirkvold Heather (2023-11)
Teaching Additive Manufacturing with Consideration for Cementitious Materials