2024-06¶

1. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
   Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
2. Kamra Juhi, Mani Ambica, Tripathi V. (2024-06)
   3D Printing:
   A Boon or a Bane for Sustainable Construction
3. Villiers Wibke, Mwongo Mwiti, Babafemi Adewumi, Zijl Gideon (2024-06)
   Quantifying Recycled Construction and Demolition Waste for Use in 3D Printed Concrete
4. Ramesh Akilesh, Rajeev Pathmanathan, Xu Shanqing, Sanjayan Jay et al. (2024-06)
   Impact Response of Textile-Reinforced 3D Printed Concrete Panels
5. Shen Jing, Li Yujia, Zhang Xiaoman, Li Yangbo et al. (2024-06)
   Three-Dimensional Printable Concrete by an Ultra-Thin Nozzle and Fully-Sealed Extrusion
6. Shoaei Parham, Gallantree-Smith Harrison, Martínez Pacheco Victor, Pamies Ramón et al. (2024-06)
   Comparative Analysis of 3D Printing of Portland Cement Mortars with Hydroxypropyl-Methylcellulose and Micro-Fibrillated Cellulose as Viscosity-Modifying-Agents
7. Sadoughi Arezou, Kouhirostami Maryam, Kouhirostamkolaei Mahtab, Qi Bing et al. (2024-06)
   Autonomous Building Design for Manufacturing and Assembly:
   A Systematic Review of Design Application, Challenges, and Opportunities
8. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2024-06)
   Buildability of Complex 3D Printed Concrete Geometries Using Peridynamics
9. Aslani Farhad, Zhang Yifan (2024-06)
   Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials
10. Bong Shin, Du Hongjian (2024-06)
    Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
11. Ghaffar Seyed, Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen (2024-06)
    Emerging Resources for the Development of Low-Carbon Cementitious Composites for 3D Printing Applications
12. Salaimanimagudam M., Jayaprakash Jaganathan (2024-06)
    Optimal Selection of Cable-Reinforcement for Concrete 3D Printed Lattice-Beam
13. Seifan Mostafa (2024-06)
    Sustainable Three-Dimensional Printing Concrete:
    Advances, Challenges, and Future Direction
14. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
    Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
    A Parametric Numerical Modeling Approach
15. Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
    Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
    Critical Factors, Advancements, Challenges, and Future Directions
16. Quintana-Ruiz Osvaldo, Campello Eduardo (2024-06)
    DEM Modeling of Advanced Manufacturing Technologies:
    From SLS to 3D Concrete Printing
17. Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
    Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
18. Giwa Ilerioluwa, Dempsey Mary, Fiske Michael, Kazemian Ali (2024-06)
    3D Printed Sulfur-Regolith Concrete Performance Evaluation for Waterless Extraterrestrial Robotic Construction
19. Gu Yucun, Khayat Kamal (2024-06)
    Effect of Superabsorbent Polymer on 3D Printing Characteristics as Rheology-Modified-Agent
20. Hasani Alireza, Dorafshan Sattar (2024-06)
    Transforming Construction?:
    Evaluation of the State of Structural 3D Concrete Printing in Research and Practice
21. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
    Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
22. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
    Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
23. Peng Yiming, Unluer Cise (2024-06)
    Performance and Microstructural Development of 3D Printable MgO-SiO2 Mixes Containing Magnesium-Silicate-Monohydrate
24. Sando Mona, Stephan Dietmar (2024-06)
    The Development of a Fly-Ash-Based Geopolymer for Extrusion-Based 3D Printing, Along with a Printability Prediction Method
25. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
    Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
26. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
    Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
27. Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
    Concrete Gyroid:
    An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
28. Liu Junli, Haikola Pirjo, Fox Kate, Tran Jonathan (2024-06)
    3D Printing of Cementitious Composites with Seashell-Particles:
    Mechanical and Microstructural Analysis
29. Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
    Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete
30. Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
    A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing
31. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2024-06)
    Improving the Structural Efficiency of Textured Three-Dimensional Concrete Printing Wall by Architectural Design
32. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
    Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
33. Ma Jiayue, Samarasinghe Don, Rotimi James, Zou Kelvin (2024-06)
    Supply Chain Landscape of 3D Printed Buildings:
    A Stakeholder Decision Support Framework
34. Ostovari Shadi, Shayani Hooman (2024-06)
    Simulation and Analysis of Automated Generalised Interleaved Layered Execution (AGILE) Process for Concrete Shell-Structures
35. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-06)
    3D Printed Multi-Functional Foamed Concrete Building Components:
    Material-Properties, Component Design, and 3D Printing Application
36. Kilic Ugur, Soliman Nancy, Omran Ahmed, Ozbulut Osman (2024-06)
    Effects of Cellulose Nanofibrils on Rheological and Mechanical Properties of 3D Printable Cement Composites
37. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-06)
    Encapsulation of Sodium-Silicate to Attain on Demand Buildability Enhancement in Concrete 3D Printing
38. Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
    Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
39. Čítek David, Hurtig Karel, Kolísko Jiří, Koteš Peter (2024-06)
    Cementitious Material Development for Additive Fabrication
40. Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
    Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
41. Du Jiashuai, Wei Yazhi, Zhang Hui, Idriss Aboubaker (2024-06)
    Effects of Oyster-Shell-Derivatives on Performance Enhancement of Biomass-Based 3D Printed Concrete
42. Jakob Cordula, Rudolph Jennifer, Wolf Julian, Neubauer Jürgen (2024-06)
    Hydration of a Two-Component CSA-OPC-Mix-Timing of Component Blending & Setting-on-Demand
43. Konoplianyk Alexander, Sopilnyak Artem, Sirenok Kyrylo, Sereda Svitlana et al. (2024-06)
    Constituent Components of 3D Printing in Construction:
    Mixture, Reinforcement and Their Main Characteristics
44. Melter Oto, Čítek David, Hvizdal Ales, Gabriel Michael et al. (2024-06)
    Development of a Robotic Fabrication System for Cementitious Materials
45. Romario Yulius, Bhat Chinmai, Ramezani Maziar, Jiang Cho-Pei (2024-06)
    Marine-Waste-Management of Oyster-Shell-Waste as Reinforcement for Clay Additive Manufacturing Components
46. González-Fonteboa Belén, Seara-Paz Sindy, Caneda-Martínez Laura (2024-06)
    3D Printing Concrete with Byproducts
47. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
    Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
48. Zhong Kuangnan, Huang Shuai, Liu Zhichao, Wang Fazhou et al. (2024-06)
    CO2-Absorbing 3D Printable Mixtures for Magnesium-Slag Valorization
49. Rama Krishna A., Mallik Mainak, Maity Damodar (2024-06)
    Developing an Appropriate Concrete Mix for 3D Concrete Printing
50. Šahmenko Genādijs, Puzule Līga, Sapata Alise, Šlosbergs Pēteris et al. (2024-06)
    Gypsum-Cement-Pozzolan Composites for 3D Printing:
    Properties and Life Cycle Assessment
51. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
52. Balkhy Wassim, Valera Elias, Karmaoui Dorra, Lafhaj Zoubeir et al. (2024-06)
    Motives and Barriers for Offsite and Onsite Construction 3D Printing
53. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
    Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
54. Besklubova Svetlana, Raza Muhammad, Zhong Ray, Skibniewski Mirosław (2024-06)
    3D Printing vs. Traditional Construction:
    Cost Comparisons from Design to Waste Disposal Stages
55. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2024-06)
    Reinvent Reinforced Concrete with Robotics and 3D Printing
56. Espinosa Simon, Slepicka Martin, Borrmann André (2024-06)
    Integration of Laser Profiler Feedback into FIM for Additive Manufacturing in Construction
57. Lachmayer Lukas, Dittrich Lars, Recker Tobias, Dörrie Robin et al. (2024-06)
    In-Line Image-Based Reinforcement Detection for Concrete Additive Manufacturing Processes Using a Convolutional Neural Network
58. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
    3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
    From Mixture Design to Printability Evaluation
59. Mantha Bharadwaj, Sati Ala, Hosny Fatma, Abdallah Mohamed et al. (2024-06)
    A Generic 3D Printing Life Cycle Assessment (LCA) Framework for AEC Applications
60. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
    In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance
61. Senthilnathan Shanmugaraj, Raphael Benny (2024-06)
    Buildability-Assessment of 3D Printed Concrete Elements Through Computer-Vision
62. Zaki Ahmed, Carnevale Marco, Giberti Hermes, Schlette Christian (2024-06)
    Monitoring of 3D Concrete Printing Quality Through Multi-View RGB-D Images
63. Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
    Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing
64. Razzaghian Ghadikolaee Mehrdad, Pan Zhu, Cerro-Prada Elena, Korayem Asghar (2024-06)
    Fresh and Hardened Properties of 3D Printing Mortar Modified by Halloysite-Nanotube
65. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
    A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
66. Čítek David, Hurtig Karel, Bureš Vladislav, Koteš Peter (2024-06)
    Cementitious Material Development for Additive Fabrication
67. Matos Paulo, Prigol Hellen, Schackow Adilson, Silva Nazário Samara et al. (2024-06)
    Quality-Control-Tests of Fresh 3D Printable Cement-Based Materials