Duan Zhenhua¶

1. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
   Evaluating Glass Powder Substitution for 3D Printed Concrete:
   Effects on Thermal Properties and Embodied Carbon
2. Tao Jie-Lin, Hu Shengming, Duan Zhenhua, Jiao Dengwu (2025-11)
   Magneto-Responsive Flow Behavior and Early-Age Microstructural Evolution of 3D Printing Lightweight Concrete with Fly Ash Cenospheres
3. Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
   Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites
4. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
   Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
   An Experimental Approach
5. Duan Zhenhua, Tao Jie-Lin, Lin Can, Jiao Dengwu et al. (2025-02)
   3D Printing-Driven Dynamic Migration of Lightweight Microspheres in the Printable Mortars:
   Experiment and Modelling
6. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
   Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
7. Hou Shaodan, Wu Wenbo, Duan Zhenhua, Zhou Shuai et al. (2024-09)
   Rheology of Fiber-Reinforced Mortar for 3D Printing Construction:
   Effect of Recycled Hybrid-Powder and Polyethylene-Fiber
8. Lv Zhenyuan, Duan Zhenhua, Xiao Jianzhuang, Ji Guangchao (2024-07)
   Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates:
   Material, Equipment and Performance
9. Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
   Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
10. Duan Zhenhua, Deng Qi, Xiao Jianzhuang, Lv Zhenyuan et al. (2024-01)
    Experimental Realization on Stress-Distribution Monitoring During 3D Concrete Printing
11. Lv Zhenyuan, Xiao Jianzhuang, Duan Zhenhua, Tang Yuxiang (2023-09)
    Time-Dependent Evolution and Strength Modulation of 3D Printed Concrete Pore-Structure Based on Microbial Remediation
12. Hou Shaodan, Duan Zhenhua, Ye Taohua, Zou Shuai et al. (2023-06)
    Mechanical Properties and Pore-Structure of 3D Printed Mortar with Recycled Powder
13. Xiao Jianzhuang, Hou Shaodan, Duan Zhenhua, Zou Shuai (2023-01)
    Rheology of 3D Printable Concrete Prepared by Secondary Mixing of Ready-Mix Concrete
14. Xiao Jianzhuang, Duan Zhenhua (2022-10)
    Latest Development of 3D Printing Adopting Recycled Aggregate
15. Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
    Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite
16. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
    Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
    An Experimental Approach
17. Zhang Hanghua, Xiao Jianzhuang, Duan Zhenhua, Zou Shuai et al. (2022-06)
    Effects of Printing Paths and Recycled Fines on Drying Shrinkage of 3D Printed Mortar
18. Xiao Jianzhuang, Lv Zhenyuan, Duan Zhenhua, Hou Shaodan (2022-03)
    Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate-Combinations
19. Zou Shuai, Xiao Jianzhuang, Duan Zhenhua, Ding Tao et al. (2021-10)
    On Rheology of Mortar with Recycled Fine Aggregate for 3D Printing
20. Hou Shaodan, Xiao Jianzhuang, Duan Zhenhua, Ma Guowei (2021-10)
    Fresh Properties of 3D Printed Mortar with Recycled Powder
21. Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
    Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
    A Cleaner Perspective on 3D Printing
22. Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
    Large-Scale 3D Printing Concrete Technology:
    Current Status and Future Opportunities
23. Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
    A Review of 3D Printed Concrete:
    Performance-Requirements, Testing Measurements and Mix-Design
24. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
    3D Recycled Mortar Printing:
    System-Development, Process-Design, Material-Properties and On-Site-Printing
25. Ding Tao, Xiao Jianzhuang, Qin Fei, Duan Zhenhua (2020-03)
    Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early-Ages
26. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
    A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
    Materials and Construction Technology