2023-08
- Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
- Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-08)
3D Printable Strain-Hardening Cementitious Composites (3DP-SHCC):
Tailoring Fresh and Hardened State Properties
- Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
- Zuo Zibo, Corte Wouter, Huang Y., Zhang L. et al. (2023-08)
Measurement of the Density of Formed Structures for Concrete 3D Printing
- Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
- Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
Effect of Operational- and Material-Oriented Parameters
- Xie Xiangyu, Liu Xuemei, Ding Faxing, Zhang Lihai (2023-08)
Characteristics and Mechanism of the Particle-Migration Subject to the Shear Flow of Concrete Flow Under Pressure
- Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-08)
Buildability Modeling of 3D Printed Concrete Including Printing-Deviation:
A Stochastic Analysis
- Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-08)
Experimental Investigation of Fresh and Time-Dependent Rheological Properties of 3D Printed Cementitious Material
- Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-08)
Fracture Properties of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
- Geffrault Anatole, Bessaies-Bey Hela, Roussel Nicolas, Coussot Philippe (2023-08)
Printing by Yield-Stress Fluid-Shaping
- Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2023-08)
A 2D Numerical Model of 3D Concrete Printing Including Thixotropy
- Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-08)
Nano-Modified Materials for New Construction Technologies:
Self-Compacting and 3D Printing
- Motalebi Arash, Khondoker Mohammad, Kabir Golam (2023-08)
A Systematic Review of Life Cycle Assessments of 3D Concrete Printing
- Matos Paulo, Zat Tuani, Lima Marcelo, Neto José et al. (2023-08)
Effect of the Superplasticizer-Addition Time on the Fresh Properties of 3D Printed Limestone-Calcined-Clay-Cement (LC³) Concrete
- Nunes Gabrielly, Anjos Marcos, Lins Ana, Negreiros Ana et al. (2023-08)
Evaluation of the Mechanical Behavior of Representative Volumetric Elements of 3DCP Masonry-Mixtures with Partial Replacement of Cement by Limestone-Filler and Metakaolin
- Yang Huashan, Che Yujun, Luo Jie (2023-08)
Calcium Leaching of 3D Printed Cement-Paste Exposed to Ammonium Chloride Solutions
- Blagojevic Boris, Gienger Andreas, Nigl David, Blandini Lucio et al. (2023-08)
Modeling, Feedforward-Control, and Constrained Trajectory-Generation for a Concrete-Conveyance-System
- Olczyk Norbert, Skibicki Szymon, Gierszewska Natalia (2023-08)
3D Printed Mortar with High Alumina-Cement as Alternative Solution for Standard Materials Used for 3D Printing
- Mani Aravindhraj, Muthukumar S., Sathyanarayanan K. (2023-08)
Use of Alccofine 1203 as a Sustainable Supplementary Cementitious Material for Printable Concrete
- Paritala Spandana, Singaram Kailash, Bathina Indira, Khan Mohd et al. (2023-08)
Rheology and Pumpability of Mix Suitable for Extrusion-Based Concrete 3D Printing:
A Review
- Fragnito Andrea, Iasiello Marcello, Mauro Gerardo, Menna Costantino et al. (2023-08)
Topology-Optimization to Design Innovative High Thermal Resistance 3D Printed Walls
- Pedrosa Ana, Gaspar Florindo (2023-08)
Rheology-Assessment of Mortar-Materials for Additive Manufacturing
- Nadoury Wegdan, Mohamed Ashraf (2023-08)
Modelling the Temperature Gradient in 3D Concrete Printing
- Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
- Marcucci Andrea, Gaggiotti Cesare, Ferrara Liberato (2023-08)
A Prediction of the Printability of Concrete Through Artificial Neural Networks
- Mogra Mihir, Asaf Ofer, Sprecher Aaron, Amir Oded (2023-08)
Design-Optimization of 3D Printed Concrete Elements Considering Buildability
- Wang Yang, Qiu Liu-Chao, Hu Yan-Ye, Cheng Song-Gui et al. (2023-08)
Influential Factors on Mechanical Properties and Microscopic Characteristics of Underwater 3D Printing Concrete
- Tarhan Yeşim, Perrot Arnaud (2023-08)
Reinforcement of 3D Printable Earth-Based Mortar with Natural Textile-Material
- Zeng Jun-Jie, Li Pei-Lin, Yan Zitong, Zhou Jie-Kai et al. (2023-08)
Behavior of 3D Printed HPC Plates with FRP-Grid-Reinforcement Under Bending
- Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
- Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
- Soares Augusto, Costa Hugo, Carmo Ricardo, Rodrigues Ana et al. (2023-08)
Comprehensive Design Methodology for 3D Printing Mortars
- Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications
- Xu Yading, Šavija Branko (2023-08)
3D Auxetic Cementitious-Polymeric Composite Structure with Compressive Strain-Hardening Behavior
- Zhou Wen, McGee Wesley, Gökçe H., Li Victor (2023-08)
A Bio-Inspired Solution to Alleviate Anisotropy of 3D Printed Engineered Cementitious Composites (3DP-ECC):
Knitting/Tilting Filaments
- Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2023-08)
Experimental Study of the In-Situ Rebar-Splicing-Technique to Reinforce 3D Printed Concrete in Vertical Directions
- Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
Quantification of the Effects of Layer-Height and Fiber-Reinforcement
- Tabassum Toiba, Ahmad Mir Ajaz (2023-08)
A Review of 3D Printing Technology:
The Future of Sustainable Construction
- Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
- Wang Qing, Ren Xiaodan, Li Jie (2023-08)
Damage-Rheology Model for Predicting 3D Printed Concrete Buildability
- Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
Evaluating Fresh and Hardened Properties
- Ramani Ayyagari, Chen Qian, Soto Borja (2023-08)
Quantifying the Impact of Concrete 3D Printing on the Construction Supply Chain
- Hájková P., Soukup A., Kohout J., Kohoutová E. et al. (2023-08)
Geopolymers for 3D Print
- Lu Bing, Li Hongliang, Wong Teck, Qian Shunzhi (2023-08)
Development of a Functional Cementitious Mixture with Expanded Graphite for Automated Spray Construction
- Zhang Nan, Sanjayan Jay (2023-08)
Surfactants to Enable Quick Nozzle Mixing in 3D Concrete Printing