Li Mingyang¶

1. Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
   Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
   Technique Development and Bond Behavior Characterization
2. Liu Zhenbang, Li Mingyang, Wang Sizhe, Deng North et al. (2026-01)
   Investigation on Bond-Slip Performance of Steel Rebar Embedded in Concrete Confined by 3D Concrete Printing Formwork
3. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
   A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
   Flexural Testing of Beams as a Proof of Concept
4. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
   Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
5. Quah Tan, Liu Zhixin, Tay Yi, Li Mingyang et al. (2025-08)
   In-Process Filament Repair in 3D Concrete Printing with Instance Segmentation
6. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
   Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
7. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
   Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
8. Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
   3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
   Mechanical and Acoustic Insulation Properties
9. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
   Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
10. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
    Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
11. Lu Bing, Li Mingyang, Qian Shunzhi, Li King et al. (2024-07)
    High-Performance 3D Concrete Printing with Zeolite
12. Tay Yi, Wang Lining, Wang Xiangyu, Quah Tan et al. (2024-07)
    Integration of Functional Materials into 3D Printing for Construction
13. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
    Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
14. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
15. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
16. Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
    BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
17. Lu Bing, Li Ziyang, Li Mingyang, Feng Jianhang et al. (2023-11)
    Substitution of Cement by Marine-Clay in Spray-Based 3D Concrete Printing
18. Lu Bing, Zhao Huanyu, Li Mingyang, Wong Teck et al. (2023-10)
    MgO/Fluid Catalytic Cracking Ash-Blends for 3D Printing on Vertical Surfaces
19. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
    Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
20. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
21. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-08)
    Experimental Investigation of Fresh and Time-Dependent Rheological Properties of 3D Printed Cementitious Material
22. Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
    Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application
23. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-03)
    Improving Homogeneity of 3D Printed Cementitious Material-Distribution for Radial Tool-Path
24. Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
    Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
25. Liu Zhixin, Li Mingyang, Wong Teck (2022-11)
    Investigations of Nozzle-Configuration and Process Parameters on Porosity Formation of the 3D Printed Structure
26. Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
    Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design
27. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2022-09)
    Spray-Based 3D Concrete Printing with Calcium and Polymeric Additives:
    A Feasibility Study
28. Li Mingyang, Zhang Xu, Tay Yi, Ting Guan et al. (2022-07)
    Three-Dimensional (3D) Printing for Building and Construction
29. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
    Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
30. Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
    Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
31. Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
    Additive Manufacturing in the Construction Industry:
    The Comparative Competitiveness of 3D Concrete Printing
32. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
    Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
33. Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
    Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
    A Case Study
34. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
    Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP)
35. Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
    Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
36. Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
    Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing
37. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
    Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
38. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
    Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
39. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
40. Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
    Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control
41. Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
    Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing
42. Tay Yi, Li Mingyang, Tan Ming (2019-04)
    Effect of Printing Parameters in 3D Concrete Printing:
    Printing Region and Support Structures
43. Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
    Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent
44. Lu Bing, Weng Yiwei, Li Mingyang, Qian Ye et al. (2019-02)
    A Systematical Review of 3D Printable Cementitious Materials
45. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2019-02)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
46. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
    Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures
47. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
    Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
48. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
    Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
49. Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
    Large-Scale 3D Printing by a Team of Mobile Robots
50. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
51. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
52. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
    Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates
53. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
    Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
54. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
    Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
55. Liu Zhixin, Li Mingyang, Wong Teck, Tan Ming (2018-05)
    Measurement of the Fresh Rheological Properties of Material in 3D Printing
56. Lu Bing, Li Mingyang, Qian Shunzhi, Leong Kah et al. (2018-05)
    Develop Cementitious Materials Incoporating Fly-Ash-Cenophere for Spray-Based 3D Printing
57. Ting Andrew, Tay Yi, Annapareddy Ashokreddy, Li Mingyang et al. (2018-05)
    Effect of Recycled-Glass Gradation in 3D Cementitious Material-Printing
58. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
    3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
59. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
60. Lao Wenxin, Li Mingyang, Masia Lorenzo, Tan Ming (2017-08)
    Approaching Rectangular Extrudate in 3D Printing for Building and Construction by Experimental Iteration of Nozzle Design