Dörfler Kathrin¶

1. Dietrich Sebastian, Schneider Philip, Richter Christiane, Najian Asl Reza et al. (2025-08)
   Multi-Fidelity Structural Design for 3D Concrete Printing with Selective Paste Intrusion
2. Keune Anna, Simšič Živa, Kloft Harald, Dörfler Kathrin (2025-06)
   AMC Edu:
   Lab Design to Learn About Additive Manufacturing in Construction
3. Dörfler Kathrin, Dielemans Gido, Leutenegger Stefan, Jenny Ercan et al. (2024-09)
   Advancing Construction in Existing Contexts:
   Prospects and Barriers of 3D Printing with Mobile Robots for Building Maintenance and Repair
4. Krakovská Ema, Briels David, Straßer Alexander, Kränkel Thomas et al. (2024-09)
   Functionally Hybridised Lightweight Concrete Components:
   Monolithic Building Construction Using Selective Paste-Intrusion
5. Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
   Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology.
6. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
   Snapshot on 3D Printing with Alternative Binders and Materials:
   Earth, Geopolymers, Gypsum and Low-Carbon Concrete
7. Chovghi Frederic, Richter David, Dörfler Kathrin, D'Acunto Pierluigi (2024-08)
   Reconsidering the Historical Cap Ceiling:
   Layerwise Form-Finding of Self-Supporting Vaulted Structures for In-Situ 3D Printing
8. Dielemans Gido, Lachmayer Lukas, Khader Noor, Hack Norman et al. (2024-07)
   Robotic Repair:
   In-Place 3D Printing for Repair of Building Components Using a Mobile Robot
9. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
   Up-Scaling Earth Formworks:
   3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
10. Fleckenstein Julia, Knychalla Bruno, Briels David, Baghdadi Abtin et al. (2024-04)
    BREUER × AM:
    Functional Hybridisation in Concrete Building Envelope Elements through Additive Manufacturing
11. Rennen Philipp, Gantner Stefan, Dielemans Gido, Bleker Lazlo et al. (2023-12)
    Robotic Knitcrete:
    Computational Design and Fabrication of a Pedestrian Bridge Using Robotic Shotcrete on a 3D Knitted Formwork
12. Briels David, Renz Mauritz, Nouman Ahmad, Straßer Alexander et al. (2023-10)
    Monolithic AM Façade:
    Multi-Objective Parametric Design-Optimization of Additively Manufactured Insulating Wall Elements
13. Fleckenstein Julia, Bertagna Federico, Piccioni Valeria, Fechner Mareen et al. (2023-09)
    Revisiting Breuer Through Additive Manufacturing:
    Passive Solar-Control-Design-Strategies for Bespoke Concrete Building Envelope Elements
14. Larikova Iuliia, Fleckenstein Julia, Chokhachian Ata, Auer Thomas et al. (2022-12)
    Additively Manufactured Urban Multispecies Façades for Building Renovation
15. Kloft Harald, Dörfler Kathrin, Bährens Meike, Dielemans Gido et al. (2022-09)
    The Research Infrastructure of the SFB TRR 277 AMC:
    Additive Manufacturing in Construction
16. Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
    Mobile Additive Manufacturing:
    A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction
17. Dörfler Kathrin, Dielemans Gido, Lachmayer Lukas, Recker Tobias et al. (2022-06)
    Additive Manufacturing Using Mobile Robots:
    Opportunities and Challenges for Building Construction
18. Lachmayer Lukas, Recker Tobias, Dielemans Gido, Dörfler Kathrin et al. (2022-05)
    Autonomous Sensing and Localization of a Mobile Robot for Multi-Step Additive Manufacturing in Construction
19. Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-06)
    TRR 277:
    Additive Manufacturing in Construction
20. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
    Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
21. Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-01)
    TRR 277:
    Additive Manufacturing in Construction
22. Graser Konrad, Baur Marco, Apolinarska Aleksandra, Dörfler Kathrin et al. (2020-09)
    DFAB House:
    A Comprehensive Demonstrator of Digital Fabrication in Architecture
23. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
    Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
    A Real-Scale Architectural Demonstrator
24. Taha Nizar, Walzer Alexander, Ruangjun Jetana, Bürgin Theophil et al. (2019-09)
    Robotic AeroCrete:
    A Novel Robotic Spraying and Surface Treatment Technology for the Production of Slender Reinforced Concrete Elements
25. Dörfler Kathrin, Hack Norman, Sandy Timothy, Giftthaler Markus et al. (2019-09)
    Mobile Robotic Fabrication Beyond Factory Conditions:
    Case Study Mesh Mould Wall of the DFAB HOUSE
26. Buchli Jonas, Giftthaler Markus, Kumar Nitish, Lussi Manuel et al. (2018-07)
    Digital In-Situ Fabrication:
    Challenges and Opportunities for Robotic In-Situ Fabrication in Architecture, Construction, and Beyond
27. Kumar Nitish, Hack Norman, Dörfler Kathrin, Walzer Alexander et al. (2017-06)
    Design, Development and Experimental Assessment of a Robotic End-Effector for Non-Standard Concrete Applications