Skip to content

#challenge

Keywords by Co - Occurrence

  1. Alawadi Fatemah, Murphy Martina, Eadie Robert (2026-01)
    Challenges and Solutions for Scalability of Affordable Housing:
    A Literature Review on 3D Printed Construction in Kuwait
  2. Norouzi Yasaman, Dixit Manish (2026-01)
    A Review of Advantages and Challenges of Using Hempcrete for 3D Printing in Construction
  3. Agegn Adamu, Regassa Yohannes, Angassa Kenatu, Mekonnen Kebede (2026-01)
    Systematic Review on 3D Concrete Printing Technology:
    Breakthroughs and Challenges
  4. Gnanaraj Anies, Moreno Leyla, Thabet Reham, Rangel Bárbara et al. (2026-01)
    Comparative Analysis of Onsite Versus Offsite 3D Printing in Construction:
    Benefits, Challenges, and Case Studies
  5. Reis Rui, Aroso Francisca, Brandão Filipe, Camões Aires et al. (2026-01)
    A Systematic Review on the Durability of 3D-Printed Cementitious Materials:
    Insights and Research Challenges
  6. Cimini Jacopo, Meroni Lorenzo, Chiantore Mariachiara, Albicini Paolo et al. (2025-12)
    Addressing Challenges in Marine Algal Restoration:
    Lessons Learned from 3D-Printed Structures on Artificial Reefs
  7. Tulliani Jean-Marc (2025-11)
    Latest Developments in 3D-Printed Engineered Cementitious Composites:
    Technologies, Prospects, and Challenges
  8. Athira R., Sathyan Dhanya (2025-11)
    Review of 3D Printing Advancements in Geopolymer Concrete:
    Current Challenges and Future Directions
  9. Assi Lateef, Alsalman Ali, Kareem Rahman, Carter Kealy (2025-11)
    Advantages and Challenges of 3D Geopolymer-Based Concrete in Construction
  10. Ke Zhijiang, Li Zichang, Chen Zhengfei, Xu Yao et al. (2025-10)
    Technological Advancements and Challenges of Robotic Arm-Based 3D Printing for Hydraulic Tunnel Lining
  11. Babajaniniashirvani Vida, McCoy Andrew, Afsari Kereshmeh (2025-09)
    Challenges and Opportunities of 3DCP Adoption for US Workforce Training
  12. Mesoudy Mouad, Rida Foulki, Driss Amegouz (2025-07)
    Addressing Geometrical and Dimensional Accuracy Challenges in 3D Concrete Printing
  13. Alkhawaldeh Ayah, Alhassan Mohammad, Sawalha Ansam, Betoush Nour et al. (2025-06)
    Integration of 3D Printing and Machine Learning in Sustainable Construction:
    Feasibility and Challenges
  14. Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
    3D Printing of Conventional and Geopolymer Concretes:
    Advancements, Challenges, Future Directions, and Cost Analysis
  15. Wijethunge Anjalee, Samarasinghe Don, Le An, Gajanayake Akvan et al. (2025-06)
    A Systematic Review on Sustainable 3D Concrete Printing:
    Opportunities and Challenges
  16. Oseji Samuel, Chukwuemeka Prince, Imoni Okes (2025-06)
    Artificial Intelligence in 3D Printed Concrete:
    Sustainability Assessment and Implementation Challenges
  17. Jalil Siti Nur Natasha Abdul, Rizal Alias Ahmad, Alias Aizat (2025-06)
    Challenges and Strategies in Implementing 3D Concrete Printing (3DCP) Technology in Malaysia:
    Materials and Design Codes
  18. Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
    Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures
  19. Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
    An Overview of 3D Printed Concrete for Building Structures:
    Material Properties, Sustainability, Future Opportunities, and Challenges
  20. Dabbaghisouraki Farshad, Tanhadoust Amin, Nehdi Moncef (2025-04)
    Fiber Reinforcement Strategies in 3D Concrete Printing:
    Addressing Challenges and Identifying Research Gaps
  21. Gulati Hemant, Lu Tianxing (2025-03)
    Customized 3D Printable Concrete:
    A Systematic Review of Challenges, Methodologies, and Adoption Strategies
  22. Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
    Advancing Structural Reinforcement in 3D Printed Concrete:
    Current Methods, Challenges, and Innovations
  23. Ali Md., Abilgaziyev Anuar, Temirzakuly Bakbergen, Kurokawa Syuhei (2024-12)
    Development of a Novel 3D Construction Printer for Consistent Buildability of Novel Geopolymer Mortar and Its Challenges
  24. Rycke Klaas, Bourriche Meriem, Daffner Tim (2024-11)
    Research and Development for 3DCP:
    Challenges, Opportunities and Solutions in Current 3DCP Realizations from B+G
  25. Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
    Micro/Nano Additives in 3D Printing Concrete:
    Opportunities, Challenges, and Potential Outlook in Construction Applications
  26. Schweizer Katie, Bhandari Sunil, Lopez-Anido Roberto, Korey Matthew et al. (2024-09)
    Recycling Large-Format 3D Printed Polymer Composite Formworks Used for Casting Pre-Cast Concrete:
    Technical Feasibility and Challenges
  27. Shivendra Bandoorvaragerahalli, Sharath Chandra Sathvik, Singh Atul, Kumar Rakesh et al. (2024-09)
    A Path Towards SDGs:
    Investigation of the Challenges in Adopting 3D Concrete Printing in India
  28. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2024-09)
    Material-Volume Reduction with Additive Manufacturing:
    Challenges for Structural Application
  29. Khokher Shawn, Sanguinetti Paola, Reilly Matthew (2024-09)
    Challenges in Enhancing Workability and Printability for 3D Printable Geopolymer Mortar
  30. Will Frank, Storch Florian, Plaschnick Paul, Taubert Markus et al. (2024-09)
    Large-Scale Monolithic Printing with Ready-Mixed Concrete:
    Challenges and Solutions
  31. Zhou Wen, Xu Yading, Šavija Branko, McGee Wesley et al. (2024-09)
    Stitching Engineered Cementitious Composites (ECC ):
    Unraveling Anisotropy Challenges Through Architectured 3D Printing Path Design
  32. Parida Lukesh, Moharana Sumedha (2024-08)
    Structural Health Monitoring for 3D Printed Civil Infrastructures:
    A Review of Challenges, Applications and Future Directions
  33. Baktheer Abedulgader, Claßen Martin (2024-07)
    A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete
  34. Lim Sean, Tay Yi, Amr Issam, Fadhel Bandar et al. (2024-07)
    Carbon Sequestration with 3D Concrete Printing:
    Potentials and Challenges
  35. Sadoughi Arezou, Kouhirostami Maryam, Kouhirostamkolaei Mahtab, Qi Bing et al. (2024-06)
    Autonomous Building Design for Manufacturing and Assembly:
    A Systematic Review of Design Application, Challenges, and Opportunities
  36. Seifan Mostafa (2024-06)
    Sustainable Three-Dimensional Printing Concrete:
    Advances, Challenges, and Future Direction
  37. Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
    Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
    Critical Factors, Advancements, Challenges, and Future Directions
  38. Tao Yaxin, Yuan Yong (2024-05)
    3D Concrete Printing for Tunnel Linings:
    Opportunities and Challenges
  39. Souza Eduarda, Ribeiro Borges Paulo, Stengel Thorsten, Nematollahi Behzad et al. (2024-03)
    3D Printed Sustainable Low-Cost Materials for Construction of Affordable Social Housing in Brazil:
    Potential, Challenges, and Research Needs
  40. Xiao Jianzhuang, Liu Haoran, Ding Tao, Yu Kequan et al. (2024-02)
    Rebar-Free Concrete Construction:
    Concept, Opportunities and Challenges
  41. Gamage Kumari, Fawzia Sabrina, Zahra Tatheer, Teixeira Muge et al. (2024-02)
    Advancement in Sustainable 3D Concrete Printing:
    A Review on Materials, Challenges, and Current Progress in Australia
  42. Keita Emmanuel, Perrot Arnaud (2024-02)
    Processing of Earth-Based Materials:
    Current Situation and Challenges Ahead
  43. Li Shuai, Lan Tian, Mendis Priyan, Tran Jonathan (2023-09)
    Robotics in 3D Concrete Printing:
    Current Progress & Challenges
  44. Liu Dawei, Zhang Zhigang, Zhang Xiaoyue, Chen Zhaohui (2023-09)
    3D Printing Concrete Structures:
    State of the Art, Challenges, and Opportunities
  45. Bai Gang, Chen G., Li Rong, Wang Li et al. (2023-07)
    3D Printed Ultra-High-Performance Concrete:
    Preparation, Application, and Challenges
  46. Ambily Parukutty, Kaliyavaradhan Senthil, Rajendran Neeraja (2023-05)
    Top Challenges to Widespread 3D Concrete Printing Adoption:
    A Review
  47. Kazemian Ali, Seylabi Elnaz, Ekenel Mahmut (2023-03)
    Concrete 3D Printing:
    Challenges and Opportunities for the Construction Industry
  48. Tamimi Adil, Alqamish Habib, Khaldoune Ahlam, Alhaidary Haidar et al. (2023-03)
    Framework of 3D Concrete Printing Potential and Challenges
  49. Nair Avinash, Aditya S., Adarsh R., Nandan M. et al. (2023-03)
    Additive Manufacturing of Concrete:
    Challenges and Opportunities
  50. Bazli Milad, Ashrafi Hamed, Rajabipour Ali, Kutay Cat (2023-02)
    3D Printing for Remote Housing:
    Benefits and Challenges
  51. Peng Yiming, Unluer Cise (2022-12)
    Development of Alternative Cementitious Binders for 3D Printing Applications:
    A Critical Review of Progress, Advantages and Challenges
  52. Zhao Shun, Wang Qiang, Fang Xinjun, Liang Wei et al. (2022-12)
    Application and Development of Autonomous Robots in Concrete Construction:
    Challenges and Opportunities
  53. Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
    3D Printing with Cementitious Materials:
    Challenges and Opportunities for the Construction Sector
  54. Khan Shoukat, Koç Muammer (2022-10)
    Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
    The Underlying Physics, Potential, and Challenges
  55. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
    Robotic On-Site Adaptive Thin-Layer Printing:
    Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
  56. Dörfler Kathrin, Dielemans Gido, Lachmayer Lukas, Recker Tobias et al. (2022-06)
    Additive Manufacturing Using Mobile Robots:
    Opportunities and Challenges for Building Construction
  57. Won Daeyoun, Hwang Bon-Gang, Chi Seokho, Kor Ju (2022-05)
    Adoption of Three-Dimensional Printing Technology in Public Housing in Singapore:
    Drivers, Challenges, and Strategies
  58. Muthumanickam Naveen, Duarte José, Nazarian Shadi, Bilén Sven (2022-04)
    Metamodels for Rapid Analysis of Large Sets of Building Designs for Robotic Constructability:
    Technology Demonstration Using the NASA 3D Printed Mars Habitat Challenge
  59. Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
    3D Printed Formwork for Concrete:
    State of the Art, Opportunities, Challenges, and Applications
  60. Rollakanti Chiranjeevi, Prasad C. (2022-04)
    Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
    A State of the Art Review
  61. Kazadi Billy, Yao Liang, Wang Li (2022-04)
    In-Process Reinforcement Method for 3D Concrete Printing:
    Status, Potentials and Challenges
  62. Miryousefi Ata Sara, Kazemian Ali, Jafari Amirhosein (2022-03)
    Application of Concrete 3D Printing for Bridge Construction:
    Current Challenges and Future Directions
  63. Sayegh Sameh, Romdhane Lotfi, Manjikian Solair (2022-03)
    A Critical Review of 3D Printing in Construction:
    Benefits, Challenges, and Risks
  64. Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
    Recent Developments and Challenges of 3D Printed Construction:
    A Review of Research Fronts
  65. Heidarnezhad Fatemeh, Zhang Qian (2022-01)
    Shotcrete-Based 3D Concrete Printing:
    State of Art, Challenges, and Opportunities
  66. Feys Dimitri, Schutter Geert, Fataei Shirin, Martys Nicos et al. (2022-01)
    Pumping of Concrete:
    Understanding a Common Placement Method with Lots of Challenges
  67. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
    Additive Manufacturing:
    A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
  68. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-04)
    Importance and Potential of Cellulosic Materials and Derivatives in Extrusion-Based 3D Concrete Printing:
    Prospects and Challenges
  69. Pradhananga Piyush, ElZomor Mohamed, Santi Kasabdji Gabriella (2021-02)
    Identifying the Challenges to Adopting Robotics in the US Construction Industry
  70. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
  71. Šavija Branko (2020-09)
    Use of 3D Printing to Create Multi-Functional Cementitious Composites:
    Review, Challenges and Opportunities
  72. Makul Natt (2020-07)
    Advanced Smart Concrete:
    A Review of Current Progress, Benefits and Challenges
  73. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
    Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
  74. Damme Henri (2020-04)
    Challenges and Opportunities for Concrete in the Digital Era
  75. Ivanova Irina, Mechtcherine Viktor (2020-01)
    Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials
  76. Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
    3D Printed Concrete:
    Applications, Performance, and Challenges
  77. Davila Delgado Juan, Oyedele Lukumon, Ajayi Anuoluwapo, Akanbi Lukman et al. (2019-07)
    Robotics and Automated Systems in Construction:
    Understanding Industry-Specific Challenges for Adoption
  78. Hamidi Fatemeh, Aslani Farhad (2019-05)
    Additive Manufacturing of Cementitious Composites:
    Materials, Methods, Potentials, and Challenge
  79. Pierre Alexandre, Perrot Arnaud (2019-04)
    3D Printing by Selective Binding in a Particle-Bed:
    Principles and Challenges
  80. Stefanoni Matteo, Angst Ueli, Elsener Bernhard (2018-09)
    Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete
  81. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
  82. Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
    Particle-Bed 3D Printing in Concrete Construction:
    Possibilities and Challenges
  83. Buchli Jonas, Giftthaler Markus, Kumar Nitish, Lussi Manuel et al. (2018-07)
    Digital In-Situ Fabrication:
    Challenges and Opportunities for Robotic In-Situ Fabrication in Architecture, Construction, and Beyond
  84. Panda Biranchi, Tay Yi, Paul Suvash, Tan Ming (2018-05)
    Current Challenges and Future Potential of 3D Concrete Printing
  85. Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
    Additive Manufacturing (3D Printing):
    A Review of Materials, Methods, Applications and Challenges
  86. Mechtcherine Viktor, Nerella Venkatesh (2018-02)
    3D Printing with Concrete:
    State-of-the-Art, Trends, Challenges
  87. Biernacki Joseph, Bullard Jeffrey, Sant Gaurav, Banthia Nemkumar et al. (2017-04)
    Cements in the 21st Century:
    Challenges, Perspectives, and Opportunities
  88. Loveridge Russell, Coray Tanja (2017-04)
    Robots on Construction Sites:
    The Potential and Challenges of On-Site Digital Fabrication
  89. Schutter Geert, Feys Dimitri (2016-11)
    Pumping of Fresh Concrete:
    Insights and Challenges
  90. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
    Digital Concrete:
    Opportunities and Challenges
  91. Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
    Additive Construction:
    State of the Art, Challenges and Opportunities
  92. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
    Additive Manufacturing of Concrete in Construction:
    Potentials and Challenges of 3D Concrete Printing