2024-08¶

1. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
   Migration of Particles Suspended in Yield-Stress Fluids:
   Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
2. Chaari Mohamed, Pereira Gilroy, Daroge Fawwad, Buainain Shamma (2024-08)
   3D Printing Birdhouses with Ceramic Clay Using a Six-Axis Palletizing Robot
3. Chousou Georgia, Yoo Angela, Jipa Mihail-Andrei, Dillenburger Benjamin (2024-08)
   Cadenza:
   3D Printed Formwork for a Free-Form Stair
4. Giacomobono Leonardo, Argenti Maria, Ferretti Elena, Paparella Giulio (2024-08)
   Three-Dimensional Printing with Earthen Materials:
   A Settlement-Scale Design Experience
5. Jipa Mihail-Andrei, Lydon Gearóid, Yoo Angela, Chousou Georgia et al. (2024-08)
   HiRes:
   3D Printed Formwork for an Integrated Slab
6. Mani Aravindhraj, Sekar Muthu (2024-08)
   Non-Destructive Testing Techniques for Investigating Mechanical Property and Porosity-Disparities in Extrusion 3D Printed Concrete
7. Mitrović Stefan, Ignjatović Ivan (2024-08)
   Connections Between Single Elements Made by 3D Printed Concrete
8. Sovetova Meruyert, Kaiser Calautit John (2024-08)
   Thermal and Energy Efficiency in 3D Printed Buildings:
   Review of Geometric Design, Materials and Printing Processes
9. Thajeel Marwah, György L. (2024-08)
   Hardened Properties of 3D Printed Concrete Influenced by Anisotropy
10. Tomečka Petr, Nováček Jan, Stráský Jiří (2024-08)
    New Structures from Printed UHPC
11. Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
    Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete
12. Parida Lukesh, Moharana Sumedha (2024-08)
    Structural Health Monitoring for 3D Printed Civil Infrastructures:
    A Review of Challenges, Applications and Future Directions
13. Prihar Arjun, Gupta Shashank, Esmaeeli Hadi, Moini Mohamadreza (2024-08)
    Tough Double-Bouligand Architected Concrete Enabled by Robotic Additive Manufacturing
14. Jarabo Rocío, Fuente González Elena, García Calvo José, Carballosa Pedro et al. (2024-08)
    Nano-Crystalline-Cellulose to Reduce Superplasticizer-Demand in 3D Printing of Cementitious Materials
15. Ler Kee-Hong, Ma Chau-Khun, Chin Chee-Long, Ibrahim Izni et al. (2024-08)
    Porosity and Durability Tests on 3D Printing Concrete:
    A Review
16. Priyadarshani Suchi, Rao Roshan, Mani Monto (2024-08)
    Paradigm Shifts in Building Construction Priorities in the Last Decade
17. Zhao Zhihui, Liu Minghao, Kang Aihong, Cai Xianhuan et al. (2024-08)
    Rheology and Buildability of Sustainable 3D Printed Magnesium-Potassium-Phosphate-Cement Composites Incorporating MgO-SiO2-K2HPO4
18. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2024-08)
    Design and Development of a Small-Scale Cement-Based 3D Printing Robot Extrusion Nozzle
19. Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
    Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
    A Review and Bibliometric Analysis
20. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
21. Sahu Akshay, Panda Biranchi (2024-08)
    A TSP-Based Continuous Path-Planning for Additive Manufacturing of Concrete
22. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
23. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
    On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
24. Alotaibi Badr, Ibrahim Shema Abdulsalam, Umar Ibrahim Abdullahi, Awad Abuhussain Mohammed et al. (2024-08)
    Assimilation of 3D Printing, Artificial Intelligence and Internet of Things for the Construction of Eco-Friendly Intelligent Homes:
    An Explorative Review
25. Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
    New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing
26. Bodea Serban, Dell’Endice Alessandro, Aloutsanidis Vasilis, Bürgin Theophil et al. (2024-08)
    Phoenix 3D Concrete-Printed Bridge:
    Falsework System and Construction Process Development
27. Bolhassani Damon, Yavartanoo Fahimeh, Tapia Javier, Akbarzadeh Masoud et al. (2024-08)
    The Effect of Post-Tensioning on the Behavior of Small-Scale 3D Printed Concrete Beams
28. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
    Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
29. Carcassi Olga, Maierdan Yierfan, Kawashima Shiho, Alon Lola (2024-08)
    Recyclability of Earth-Fiber Materials for 3D Printing
30. Chai Hua, Ororbia Maximilian, Zhi Yefan, Welch Ryan et al. (2024-08)
    Design Approach for a Post-Tensioned Funicular Concrete Beam
31. Chovghi Frederic, Richter David, Dörfler Kathrin, D'Acunto Pierluigi (2024-08)
    Reconsidering the Historical Cap Ceiling:
    Layerwise Form-Finding of Self-Supporting Vaulted Structures for In-Situ 3D Printing
32. Georgiou Christos, Kontovourkis Odysseas (2024-08)
    Robotic 3D Printing on Inclined Surfaces Using Adaptive Formwork Principles for Prefabricated Curve-Like Structures
33. Hanifa Mohamad, Figueiredo Bruno, Mahdy Deena, Mendonça Paulo et al. (2024-08)
    Continuum Optimization of 3D Printed Self-Supported Shell:
    Hybrid Strategy for Crafting Ribbed System
34. Kovaleva Daria, Tomovic Ivan, Gericke Oliver, Blandini Lucio (2024-08)
    Structural Design and Analysis of Marinaressa-Coral-Tree
35. Licen Jurij, Chen Taole (2024-08)
    Fabrication-Aware Design for 3DCP Shells Using Genetic Optimization
36. Lo Tzu-Hsien, Liu Bosheng (2024-08)
    Overview of Injection Liquid Printing with Dredged-Based Material for Concrete Formwork
37. Melcher Grace, Rauch Andy, Yashar Melodie, Ballard Jason (2024-08)
    3D Printing ICONs Cosmic Pavilion:
    A Case Study in Cementitious Extrusion of Unsupported Cantilevers
38. Ororbia Maximilian, Chai Hua, Zhi Yefan, Vakhshouri Pouria et al. (2024-08)
    Experimental Study of a Funicular Concrete Beam Prototype
39. Rennen Philipp, Gantner Stefan, Rothe Tom, Baz Bilal et al. (2024-08)
    Structural Evaluation of Shotcrete 3D Printing and Robotic Fiber Winding for Thin-Shell Elements
40. Vatandoost Mohsen, McGee Wesley, Buelow Peter (2024-08)
    Ultra-Thin-Layered 3D Printed Hollow-Core Sections for Concrete Casting
41. Carcassi Olga, Alon Lola (2024-08)
    Additive Manufacturing of Natural Materials
42. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-08)
    Time-Dependent Behavior of 3D Printed Fiber-Reinforced Limestone-Calcined-Clay-Cement Concrete Under Sustained Loadings
43. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
44. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
    Enhancing Structural Efficiency with Digital Concrete:
    Principles, Opportunities and Case Studies
45. Abbasnejad Behzad, Soltani Sahar, Karamoozian Amirhossein, Gu Ning (2024-08)
    A Systematic Literature Review on the Integration of Industry 4.0 Technologies in Sustainability Improvement of Transportation Construction Projects:
    State of the Art and Future Directions
46. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
    Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
47. Soto Rubio Mauricio, Mirza Muhammad, Kagdi Mustafa, Bisati Ahmad (2024-08)
    Examining the Role of Concrete 3D Printing for Housing Construction on Indigenous Reserves in Canada
48. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2024-08)
    Exploration of the Open-Time and Compressive Strength of Alkali-Activated Mixtures for 3D Printed Concrete
49. Ahmad Lina, Jabi Wassim, Sosa Marco (2024-08)
    Non-Planar Robotic Printing of Earth-Based Material:
    A Case Study Using Cob-Like Mixture
50. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
    3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
    Feasibility in Long-Open-Time Applications
51. Du Guoqiang, Sun Yan, Qian Ye (2024-08)
    3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) Reticulated Shell Roof Inspired by the Water Spider
52. Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
    A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
    Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing
53. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2024-08)
    Effect of Pumping Process on the Properties of 3D Printed Concrete Containing Air-Entraining-Agent
54. Shahzad Qamar, Li Fangyuan (2024-08)
    Assessment of Load-Bearing Capacity and Buildability Failures in 3D Printed Concrete Structures
55. Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
    Aluminate 2K Systems in Digital Concrete:
    Process, Design, Chemistry, and Outlook
56. Robayo-Salazar Rafael, Muñoz Miguel, Vargas Armando, Gutiérrez Ruby (2024-08)
    Effects of Incorporating Bentonite, Metakaolin, Microsilica, and Calcium-Carbonate on the Rheological Properties of Portland-Cement-Based 3D Printing Inks
57. Rudziewicz Magdalena, Maroszek Marcin, Setlak (nee Pławecka) Kinga, Góra Mateusz et al. (2024-08)
    Optimization of Foams-Polypropylene Fiber-Reinforced Concrete Mixtures Dedicated for 3D Printing
58. Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-08)
    The Effect of Nano-Zinc-Oxide on Freeze-Thaw-Resistance of 3D Printed Geopolymer Mortars
59. Yao Yiming, Bu Dechao, Yu Jiamian, Shao Lijing et al. (2024-08)
    Flexural Behavior of Textile Reinforced 3D Printed Concrete Under Quasi-Static and Dynamic Impact Loads
60. Rehman Saif, Riaz Raja, Usman Muhammad, Kim In-Ho (2024-08)
    Augmented Data-Driven Approach Towards 3D Printed Concrete Mix Prediction
61. Dai Xiaodi, Tao Yaxin, Zhang Yi, Ding Luchuan et al. (2024-08)
    Development of 3D Printable Alkali-Activated Slag-Metakaolin Concrete
62. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
    Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
63. Dahlenburg Maximilian, Tan Yuan, Li Mengxue, Ajmal Moshin et al. (2024-08)
    A Flexible and Efficient Calibration Method for Discrete Element Simulations of Additive Manufacturing in Construction
64. Yu Qian, Zuo Qinxin, Zhang Yamei, Pan Jinlong (2024-08)
    An Investigation on Enhancing the Bonding Properties of 3D Printed Concrete Permanent Formwork and Post-Casted Concrete
65. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
66. Li Leo, Zhang Guang-Hu (2024-08)
    Feasibility of Underwater 3D Printing:
    Effects of Anti-Washout-Admixtures on Printability and Strength of Mortar
67. Aghaee Kamran, Li Linfei, Roshan Alireza, Namakiaraghi Parsa (2024-08)
    Additive Manufacturing Evolution in Construction:
    From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications
68. Nguyen Vuong, Tran Jonathan, San Ha Ngoc, Xie Yi et al. (2024-08)
    Blast-Resistance of 3D Printed Bouligand Concrete Panels Reinforced with Steel-Fibers:
    Numerical Investigations
69. Reddy B., Sameer Sk, Ramesh V., Sriya B. et al. (2024-08)
    Sustainable Development of 3D Printable Quaternary Geopolymer Concrete
70. Dvorkin Leonid, Marchuk Vitaliy, Makarenko Ruslan (2024-08)
    Mechanochemical-Activated Fly-Ash Concrete Suitable for 3D Printing
71. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
    Spray-Based 3D Printed Foam-Concrete:
    Cooperative Optimization for Lightweight and High-Strength Performance
72. Prathipati S., Vardhan J., Murali D., Nithin C. et al. (2024-08)
    An Experimental Study on the Effect of a Viscosity-Modifying-Agent on the Rheological and Strength Behavior of 3D Printed Concrete
73. Şahin Hatice, Akgümüş Fatih, Mardani Ali (2024-08)
    Mechanical and Rheological Properties of Fiber‐Reinforced 3D Printable Concrete in Terms of Fiber Content and Aspect Ratio
74. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-08)
    Evaluation and Optimization of Micro-Calcium-Carbonate-Modified 3D Printed Rubber-Crumb Concrete
75. Yan Ruizhen, Meng Fangqi, Ke Guoju, Jia Kerui (2024-08)
    Comparative Evaluation of the Applicability of 3D Printing Mortar with Different Waste-Powders
76. Zhi Yefan, Teng Teng, Akbarzadeh Masoud (2024-08)
    Designing 3D Printed Concrete Structures with Scaled Fabrication Models
77. Banijamali Kasra, Vosoughi Payam, Arce Gabriel, Noorvand Hassan et al. (2024-08)
    Automated Strength Monitoring of 3D Printed Structures via Embedded Sensors
78. Glotz Theresa, Petryna Yuri (2024-08)
    Experimental Characterization of Anisotropic Mechanical Behavior and Failure-Mechanisms of Hardened Printed Concrete
79. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
80. Yuan Shuaihua, Duan Dengke, Sun Junbo, Yu Yi et al. (2024-08)
    Mechanical, Alkali Excitation, Hydrothermal Enhancement of 3D Printed Concrete Incorporated with Antimony-Tailings
81. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
    Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
    A Preliminary Investigation Towards 3D Printing
82. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
    Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
    From Standard Casting to 3D Printing
83. Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2024-08)
    Comparison of Reinforcement-Fibers in 3D Printing Mortars Using Multi-Criteria Analysis
84. Jiang Shangjin, Wang Yuntao, Hua Sudong, Yue Hongfei et al. (2024-08)
    Preparation and Performance Characterization of Low-Density 3D Printed Expanded Perlite-Foam-Concrete
85. Ahmed Salma, Romdhane Lotfi, Sayegh Sameh, Manjikian Solair (2024-08)
    Risk-Assessment for 3D Printing in Construction Projects
86. Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
    Self-Supporting Lamellae:
    Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures
87. Hutyra Adam, Bańkosz Magdalena, Tyliszczak Bożena (2024-08)
    Technology for Automated Production of High-Performance Building Compounds for 3D Printing
88. Xu Wen, Jiang Dengjie, Zhao Qian, Wang Linbing (2024-08)
    Study on Printability of 3D Printing Carbon-Fiber-Reinforced Eco-Friendly Concrete:
    Characterized by Fluidity and Consistency
89. Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
    Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
    Preliminary Study