Skip to content

2024-12

  1. Fahfouhi Karim, Varum Humberto, Almeida Henrique, Craveiro Flávio et al. (2024-12)
    Reshaping Africa’s Sustainable Future Through 3D Printing
  2. Jiang Youbau, Gao Pengxiang, Adhikari Sondipon, Yao Xiaofei et al. (2024-12)
    Studies on the Mechanical Properties of Inter-Layer Interlocking 3D Printed Concrete Based on a Novel Nozzle
  3. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
    From Local Earth to Modern Structures:
    A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
  4. Mousavi Moein, Bengar Habib, Mousavi Fateme, Mahdavinia Pooneh et al. (2024-12)
    Inter-Layer Bond Strength Prediction of 3D Printable Concrete Using Artificial Neural Network:
    Experimental and Modeling Study
  5. Raqeb Hanan, Ghaffar Seyed (2024-12)
    3D Concrete Printing in Kuwait:
    Stakeholder Insights for Sustainable Waste Management Solutions
  6. Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
    Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
    A Review
  7. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-12)
    An Eco-Friendly Ultra-High-Performance Geopolymer Concrete with Quaternary Binders for 3D Printing
  8. Shafei Hazwani, Arpa Ar, Rahman Rahimi, Algahtany Mohammed et al. (2024-12)
    Difficulties and Benefits of Implementing 3D Printing in Housing Development
  9. Tarhan Yeşim, Tarhan İsmail, Şahin Remzi (2024-12)
    Comprehensive Review of Binder Matrices in 3D Printing Construction:
    Rheological Perspectives
  10. Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
    Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork
  11. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
    Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
  12. Yabanigül Meryem, Özer Derya (2024-12)
    Exploring Architectural Units Through Robotic 3D Concrete Printing of Space-Filling Geometries
  13. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2024-12)
    CO2 Sequestration and Low-Carbon-Strategies in 3D Printed Concrete
  14. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
    Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
  15. Zhao Zhihui, Cai Xianhuan, Chen Fan, Gong Yongfan et al. (2024-12)
    Effect of Wollastonite-Content on Rheology and Mechanical Properties of 3D Printed Magnesium-Potassium-Phosphate-Cement-Based Material of MgO-SiO2-K2HPO4
  16. Huang Junxiang, Peng Zeqin, Tan Xianzhong, Gong Guofang et al. (2024-12)
    Mechanism Analysis of the Magnetic Field-Assisted 3D Printed Steel-Fiber-Reinforced Concrete
  17. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
    High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
    Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
  18. Aminpour Nima, Memari Ali (2024-12)
    Analysis of Anisotropic Behavior in 3D Concrete Printing for Mechanical Property Evaluation
  19. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
    Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
  20. Gurunandan M., Mala Hiranya, Nanthagopalan Prakash (2024-12)
    Effect of Water-to-Binder, Aggregate-to-Binder-Ratio and Admixtures on Printability and Mechanical Properties of 3D Printable Mortar Mixtures
  21. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
    Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
    Experiment and Finite Element Study
  22. Tarhan Yeşim, Şahin Remzi (2024-12)
    The Impact of Air-Entraining on Frost-Endurance in 3D Printed Concrete:
    The Function of Printing Orientation and Curing Process
  23. Aziz Saqib, Alexander Bradley, Gengnagel Christoph, Loutfi Jamila (2024-12)
    Minimal Mineral ‑ Rethinking Ceiling Systems:
    Shaping the Future of Sustainable Construction
  24. Glotz Theresa, Rasehorn Inken, Petryna Yuri (2024-12)
    Mechanical Behavior of Hardened Printed Concrete and the Effect of Cold Joints:
    An Experimental Investigation
  25. Latha P., Shanmugavelu V., Tamilmani A., Thayalnayaki D. et al. (2024-12)
    Evaluating 3D Concrete Printing Effectiveness Through a Comparative Study Using SVM, Decision Trees, and Random Forest Techniques
  26. Shilton Robert, Wang Shen, Banthia Nemkumar (2024-12)
    Use of Polysaccharides as a Rheology-Modifying-Admixture for Alkali-Activated Materials for 3D Printing
  27. Bahoria Boskey, Bhagat Rajesh, Pande Prashant, Raut Jayant et al. (2024-12)
    Design-Optimization of 3D Printed Concrete Elements Considering Life Cycle Assessment and Life Cycle Costing
  28. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
    Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
  29. Neef Tobias, Kalthoff Matthias, Müller Steffen, Cruz Cynthia et al. (2024-12)
    Mineral-Impregnated Carbon-Fibers-Reinforcement for Concrete Elements Manufactured by Extrusion
  30. Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
    Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures
  31. Maroszek Marcin, Rudziewicz Magdalena, Hutyra Adam, Dziura Paweł et al. (2024-12)
    Evaluation of 3D Concrete Printing Extrusion-Efficiency
  32. Pham Thi, Huang Jie (2024-12)
    3D Printed Artificial Coral Reefs:
    Design and Manufacture
  33. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
    Corrigendum
  34. Ali Md., Abilgaziyev Anuar, Temirzakuly Bakbergen, Kurokawa Syuhei (2024-12)
    Development of a Novel 3D Construction Printer for Consistent Buildability of Novel Geopolymer Mortar and Its Challenges
  35. Cao Xiangpeng, Wu Shuoli, Cui Hongzhi (2024-12)
    Experimental Study on In-Situ Mesh Fabrication for Reinforcing 3D Printed Concrete
  36. Alarrak Rashed, Brand Alexander (2024-12)
    Mechanical Performance of Extruded Functionally-Graded Fiber-Reinforced Mortar with Targeted Fiber-Injection
  37. Du Longyu, Zhou Jiehang, Lai Jianzhong, Yin Xuexiang et al. (2024-12)
    Dynamic Damage Behavior and Anisotropic Mechanism of 3D Printed Reinforced Concrete Subjected to Penetration
  38. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
    Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
  39. Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
    Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks
  40. Zuo Zibo, Tao Yaxin, Corte Wouter (2024-12)
    Experimental Research of Concrete Temperature-Distribution During Large-Scale On-Site 3D Printing Based on Infrared-Thermal-Imaging
  41. Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
    Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
  42. Mohammed Arafat, Tamimi Adil, Abdwais Ahmed (2024-12)
    Structural Performance of 3D Concrete Printed Load-Bearing Walls
  43. Li Fangyuan, Hu Xiangcheng, Shahzad Qamar (2024-12)
    Anisotropic Behavior in 3D Printed Concrete:
    Finite Element Simulation Approach
  44. Wang Qingwei, Han Song, Liu Qi, Yang Junhao et al. (2024-12)
    Research on the 3D Printing Process and Filament Shape of Cementitious Materials in Low Gravity
  45. Zhao Shuai, Zhou Ran, Luo Mingming, Liu Jianfei et al. (2024-12)
    Distributed Fiber Optic Sensing System for Vibration Monitoring of 3D Printed Bridges
  46. Forcael Eric, Alucema Contreras Elena, Burkart Medina Adolfo, García-Alvarado Rodrigo et al. (2024-12)
    Comparative Study of Visual Programming Procedures for 3D Concrete Printing of Different Geometric Shapes
  47. Hass Lauri, Bos Freek, Salet Theo (2024-12)
    Bond Governed Interactions Between Helical Reinforcement and 3D Printed Concrete
  48. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
    3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
    Design, Manufacturing, and Performance
  49. Zhou Longfei, Gou Mifeng, Zhang Haibo, Hama Yukio (2024-12)
    Investigation of Activated Bauxite-Tailings for Application in 3D Printed Concrete via a Modified Anderson and Anderson-Model
  50. Irshidat Mohammad, Cabibihan John-John, Fadli Fodil, Ramahi Siraj et al. (2024-12)
    Waste Materials Utilization in 3D Printable Concrete for Sustainable Construction Applications:
    A Review
  51. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
    Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
  52. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2024-12)
    Rheology and Early-Age Evaluation of 3D Printable Cement-Limestone-Filler-Pastes with Nano-Clays and Methylcellulose
  53. Zhao Hongyu, Jassmi Hamad, Liu Xianda, Wang Yufei et al. (2024-12)
    Artificial Intelligence-Based Microcracks Research in 3D Printing Concrete
  54. Cruz Cynthia, Bosbach Sven, Kalthoff Matthias, Beckmann Birgit et al. (2024-12)
    Material-Minimized Rib and Honeycomb Slabs Made of Extruded Carbon-Reinforced Concrete Webs
  55. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
    Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
    Materials, Engineered Properties and Techniques for Additive Manufacturing
  56. Kul Anil, Kocaer Öznur, Aldemir Alper, Yıldırım Gürkan et al. (2024-12)
    3D Printable One-Part Alkali-Activated Mortar Derived from Brick-Masonry-Wastes
  57. Srivastava Manu, Walker Ian (2024-12)
    Continuum Soft Robots with Applications in the Construction Industry
  58. Andrade Rodrigo, Mendoza Reales Oscar, Carvalho Gonzaga e Silva Ana, Fairbairn Eduardo et al. (2024-12)
    Thermal Behavior of Air-Fluid in Triangular Cavities of 3D Printed Concrete Walls
  59. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2024-12)
    Assessing 3D Printed Concrete Process Parameters Through Discrete Element Modeling
  60. Santos da Mata Gomes Daniela, Rocutan Melina, Pereira Lucas, Motezuki Fabio et al. (2024-12)
    Simulation of 3D Concrete Printing Using an Implicit Formulation of the Moving Particle Semi-Implicit Method
  61. Yaqub Walid, Aslani Farhad (2024-12)
    Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
  62. Navarrete Iván, Tošić Nikola, Hermida José, Saavedra Ruth et al. (2024-12)
    3D Printed Concrete as a Source of Recycled Aggregates:
    Potential for Multi-Recycling and CO2 Sequestration
  63. Nunes Lavynia, Miranda Freitas Juan Oliveira, Abud Vilanova João, Rubin Ariane (2024-12)
    Comparative Analysis of the Construction Feasibility of Special Works of Art Using 3D Concrete Printing, Prefabricated Concrete, and Cast In-Situ
  64. Silvestro Laura, Ribeiro Rodrigo, Navarrete Iván (2024-12)
    Advancements in Low Carbon-Emission Cements for 3D Printing:
    A State-of-the-Art Review