Skip to content

2023-06

  1. Kazemian Ali, Giwa Ilerioluwa, Ekenel Mahmut (2023-06)
    Large-Scale Additive Manufacturing for Automated Construction:
    An Overview
  2. Huang Shuyi, Xu Weiguo, Hu Hanyang (2023-06)
    Space-Filling and Print-Path-Generation-Methods for Large-Area 3D Concrete Printing Pavements
  3. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
    Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
  4. Pott Ursula, Jakob Cordula, Wolf Julian, Stephan Dietmar (2023-06)
    Comparison of Physical and Physico-Chemical Methods for 3D Printing Application with the Focus on the Unconfined Uniaxial Compression-Test
  5. Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
    Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials
  6. Zohrabyan Vahan, Zöller Raphael, Gradic Simon, Braml Thomas (2023-06)
    Potential of 3D Printed Steel Fiber Reinforced Concrete Components for the Protection of Critical Infrastructure:
    Impact and Free-Fall Tests
  7. Alzarrad Ammar, Song Siyuan, Hatamleh Muhammad, Awolusi Ibukun et al. (2023-06)
    Guideline for Automated Construction of Reinforced Concrete Beams Using 3D Printing and BIM
  8. Martin Michael, Banijamali Kasra, Kazemian Ali (2023-06)
    Reality-Capture Technologies for Automated Quality-Control During Construction 3D Printing
  9. Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
    Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
    A Detailed Review
  10. Schönsee Eric, Hüsken Götz, Jeyifous Olubunmi, Mezhov Alexander et al. (2023-06)
    Calculating Rheological Properties of Fresh Mortar for Additive Manufacturing Based on Experimental, Multi-Sensor Data
  11. Yang Hui-Qin, Klug Christina, Schmitz Thomas (2023-06)
    Fiber-Reinforced Clay:
    An Exploratory Study on Automated Thread Insertion for Enhanced Structural Integrity in LDM.
  12. Zhang Dan, Ma Guowei, Guan Jingyuan, Wang Li et al. (2023-06)
    Cyclic Behavior of Unbonded Post-Tensioned Pre-Cast Segmental Concrete Columns Fabricated by 3D Printed Concrete Permanent Formwork
  13. Jesus Manuel, Pessoa Ana Sofia, Guimarães Ana, Rangel Bárbara et al. (2023-06)
    A Reflection on Sustainable Opportunities for 3D Printing in Construction
  14. Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
    Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
  15. Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
    A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry
  16. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
    The Development of Soil-Based 3D Printable Mixtures:
    A Mix-Design Methodology and a Case Study
  17. Singh Narinder, Colangelo Francesco, Farina Ilenia (2023-06)
    Sustainable Non-Conventional Concrete 3D Printing:
    A Review
  18. Ungureanu Dragoș, Onuțu Cătălin, Isopescu Dorina, Țăranu Nicolae et al. (2023-06)
    A Novel Approach for 3D Printing Fiber-Reinforced Mortars
  19. Salaimanimagudam M., Jayaprakash Jaganathan (2023-06)
    Effect of Printing Parameters on Inter-Filament Voids, Bonding, and Geometrical Deviation in Concrete 3D Printed Structures
  20. Wolfs Robert, Bos Derk, Salet Theo (2023-06)
    Lessons Learned of Project Milestone:
    The First 3D Printed Concrete House in the Netherlands
  21. Liu Junli, Tran Jonathan, Ginigaddara Thusitha, Mendis Priyan (2023-06)
    Exploration of Using Graphene Oxide for Strength Enhancement of 3D Printed Cementitious Mortar
  22. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
    3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
  23. Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
    3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
    Automatic Construction, Digital Rebuilding, and Seismic Performance
  24. Bello Nicholas, Memari Ali (2023-06)
    A Structural and Thermal Comparative Review of 3D Printed Wall Shapes
  25. Mozaffari Salma, Bruce Mackenzie, Clune Gabrielle, Xie Ruxin et al. (2023-06)
    Digital Design and Fabrication of Clay Formwork for Concrete Casting
  26. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
    Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
  27. Najvani Mohammad, Murcia Daniel, Soliman Eslam, Taha Mahmoud (2023-06)
    Early-Age Strength and Failure Characteristics of 3D Printable Polymer Concrete
  28. Fairbairn Eduardo, Santos Larissa, Mendoza Reales Oscar, Farias Marina et al. (2023-06)
    New Conceptions and Constructive Methods for Pumped Storage Hydropower-Plants
  29. Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-06)
    Natural Fibers for a 3D Printable Eco-ECC Material
  30. Hou Shaodan, Duan Zhenhua, Ye Taohua, Zou Shuai et al. (2023-06)
    Mechanical Properties and Pore-Structure of 3D Printed Mortar with Recycled Powder
  31. Katsiotis Marios, Michalis Vasileios, Papargyriou Despoina, Mavratzotis Emmanouil et al. (2023-06)
    3BUILD:
    First 3D Printed Structure in Greece
  32. Pfleger Marc-Patrick, Geyer Sebastian, Hölzl Christian, Vill Markus (2023-06)
    Investigations to Improve the Carbon Footprint of Thin Walled Concrete Structures by 3D Printing Prefabricated Elements
  33. Sergis Vasileios, Ouellet-Plamondon Claudiane (2023-06)
    An Optimum Mix-Design Method for 3D Concrete Printing Applications
  34. Shenawa Amaal, Karoti Poonam (2023-06)
    3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
  35. Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo (2023-06)
    Rheological Behavior of 3D Printable Bio-Concretes Produced with Rice Husk
  36. Zhang Sisi, Kalus Matthias, Engel Sven, Hegger Josef et al. (2023-06)
    Development of an Innovative 3D Printing Process for Reinforced Concrete:
    AMoRC Method
  37. Joshi Arpan, Poullain Philippe, Craveiro Flávio, Bártolo Helena (2023-06)
    Earth as a Construction-Material for Sustainable 3D Printing:
    Rheological Aspect
  38. Munemo Rue, Kruger Jacques, Zijl Gideon (2023-06)
    Improving Inter-Layer Bond in 3D Printed Concrete Through Induced Thermo-Hydrokinetics
  39. Yang Wenwei, Wang Li, Ma Guowei, Feng Peng (2023-06)
    An Integrated Method of Topological-Optimization and Path-Design for 3D Concrete Printing
  40. Anleu Paula, Pape Yann, Chen Qiyi, Advincula Rigoberto et al. (2023-06)
    An Innovative Carbonated Cementitious Material and Its Printability and Carbon Mineralization Capacity
  41. Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
    Qualitative Technology Evaluation of Digital Fabrication with Concrete:
    Conceptual Framework and Scoreboard
  42. Jacquet Yohan, Perrot Arnaud (2023-06)
    Evolutionary Approach Based on Thermoplastic Bio-Based Building Material for 3D Printing Applications:
    An Insight into a Mix of Clay and Wax
  43. Sahoo Pitabash, Gupta Souradeep (2023-06)
    3D Printable Earth-Based Alkali-Activated Materials:
    Role of Mix-Design and Clay-Rich Soil
  44. Heywood Kate, Nicholas Paul (2023-06)
    Sustainability and 3D Concrete Printing:
    Identifying a Need for a More Holistic Approach to Assessing Environmental Impacts
  45. Jones Kathryn, Li Mo (2023-06)
    Life Cycle Assessment of Ultra-Tall Wind Turbine Towers Comparing Concrete Additive Manufacturing to Conventional Manufacturing
  46. Xu Zhuoyue, Zhang Dawang, Li Hui, Yin Le et al. (2023-06)
    Effects of Additives on the Mechanical Properties, Rheology, and Printing Properties of PCC-Based 3DPMs
  47. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
    Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
  48. Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
    3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
    Influences of Filament Offset on Mechanical Properties
  49. Xu Zhuoyue, Zhang Dawang, Li Hui, Jin Haoyu et al. (2023-06)
    Mix-Design and 3D Printing Correlation-Performance of PCC-Based 3DPM
  50. Deng Qi, Zou Shuai, Xi Yonghui, Singh Amardeep (2023-06)
    Development and Characteristic of 3D Printable Mortar with Waste-Glass-Powder
  51. Dittel Gözdem, Dringenberg Steffen, Gries Thomas (2023-06)
    Through Textile to Reinforced 3D Concrete Printing
  52. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-06)
    A System-Development-Strategy of a Digital Construction for Building Frames
  53. Kruppa Henning, Kalthoff Matthias, Neef Tobias, Reißig Silvia et al. (2023-06)
    Alkali-Activated Binder-Requirements for Extrusion and 3D Printing of Carbon-Reinforced Concrete
  54. Miri Zahra, Polak Maria, Baaj Hassan (2023-06)
    Finite-Element-Analysis of Hardened Properties of 3D Printed Concrete
  55. Neef Tobias, Dittel Gözdem, Scheurer Martin, Gries Thomas et al. (2023-06)
    Utilizing Textiles as Integrated Formwork for Additive Manufacturing with Concrete
  56. Neef Tobias, Kalthoff Matthias, Müller Steffen, Backes Jana et al. (2023-06)
    Extrusion of High Yield Strength Carbon-Reinforced Concrete with Mineral Impregnated Rovings
  57. Nikravan Ata, Aydoğan Olcay, Dittel Gözdem, Scheurer Martin et al. (2023-06)
    Implementation of Continuous Textile-Fibers in 3D Printable Cementitious Composite
  58. Obermeier Nico, Wiese Felix, Kustermann Andrea, Stengel Thorsten (2023-06)
    3D Printing Cement-Based Materials Using 100% of Recycled Aggregates
  59. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
    A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
  60. Pressmair Nadine, Kromoser Benjamin (2023-06)
    Development-Stages of Structurally Optimized Concrete Girders:
    Design-Concepts, Material-Strategies and Experimental Investigation
  61. Richter Christiane, Jungwirth Jörg (2023-06)
    3D Concrete Printing:
    From Mechanical Properties to Structural Analysis
  62. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2023-06)
    Experimental Study on the Directional Dependency of 3D Printed Concrete in the Elastic Range
  63. Soares Augusto, Rodrigues Ana, Costa Hugo, Carmo Ricardo et al. (2023-06)
    Bond Between Layers of Cementitious Mortars Developed for 3D Printing
  64. Hua Tianran, Lin Alexander, Poh Wen, Wong De et al. (2023-06)
    3D Printed Concrete Shear Keys:
    Design and Experimental Study
  65. Ali Ammar, Riaz Raja, Malik Umair, Abbas Syed et al. (2023-06)
    Machine-Learning-Based Predictive-Model for Tensile and Flexural Strength of 3D Printed Concrete
  66. Chen Yu, Zhang Yu, He Shan, Liang Xuhui et al. (2023-06)
    Improving Structural Build-Up of Limestone-Calcined-Clay-Cement-Pastes by Using Inorganic Additives
  67. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2023-06)
    Set-on-Demand of Alkali-Activated Slag Mixture Using Twin-Pipe Pumping
  68. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-06)
    Experimental Workflow Implementation for Automatic Detection of Filament-Deviation in 3D Robotic Printing Process
  69. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2023-06)
    Numerical Modelling of Planned Corner-Deposition in 3D Concrete Printing
  70. Antoni Antoni, Adi N., Kurniawan M., Agraputra A. et al. (2023-06)
    The Influence of Viscosity-Modifying Agent and Calcium-Carbonate on 3D Printing Mortar Characteristics
  71. Paudel Satish (2023-06)
    Investigation of Modelling Approaches to Study the Structural Performance of 3D Printed Plain Wall Under Uniform Axial Compression
  72. Pham Thi, Trinh Duy, Nguyen Thi, Do Trong et al. (2023-06)
    Study on Flexural Behavior of Printed Concrete Wide Beams Using Polypropylene-Fibers
  73. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
    Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement