2025-01
- Alós Shepherd David, Dehn Frank, Kuhn Alexander, Degen Robin et al. (2025-01)
3D Concrete Printing of Solid Wall Cross-Sections with Truckmounted Concrete Pump:
A Report on the First Printed Structure in Germany
- Arash Motalebi, Mohammad Aba, Golam Kabir (2025-01)
Assessing the Environmental Impact of Building Houses in Remote Areas:
3D Printing vs. Traditional Construction Techniques
- Ivaniuk Egor, Pukhkaiev Dmytro, Reichle Mathias, Zhao Wanqi et al. (2025-01)
Robotic Assembly of Modular Concrete Shells Using Falsework
- Wu Changzhong, Lu Yuanyuan, Tian Jiaxin, Zhu Xingyu et al. (2025-01)
Research on 3D Printed Section of Concrete Based on Robot Arm and Structural Design of Sprinkler Head
- Du Guoqiang, Qian Ye (2025-01)
Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
- Sangiorgio Valentino, Floris Ignazio, Duran Dayan (2025-01)
Unified Integration Approach for Bridging BIM Model to 3D Construction Printing and Scale Prototyping
- Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
- Kumar Soni Ashish, Anil Sangwai Keyur, Panda Biranchi (2025-01)
In-Process Monitoring and Quality-Assessment of 3D Concrete Printing Process
- Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2025-01)
Sustainable 3D Printable Concrete-Mix Using Copper-Slag
- Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
- Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
Properties, Mechanism, and Environmental Impacts
- Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
- Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-01)
Influence of Mixture-Composition and Carbonation-Curing on Properties of Sustainable 3D Printable Mortars
- Tanyildizi Harun, Coskun Ahmet, Seloglu Maksut, Durmaz Taner (2025-01)
Examination of Mechanical Properties of 3D Printed Geopolymer-Mortar Using the Taguchi -Method
- Zhong Jianjun, Lyu Libo, Deng Yongjie, Ma Haiyan et al. (2025-01)
An Evaluation-Method for the Printability of Magnesium-Phosphate-Cement Concrete for Integrated Mixing-Stirring-Extrusion Rapid 3D Printing
- Khan Shoukat, Koç Muammer (2025-01)
Advancements in Additively Manufactured Safety Materials:
Energy-Efficient 3D Printing Solutions for Critical Infrastructure
- Chen Meng, Yu Kanghao, Zhang Tong, Wang Yuting (2025-01)
Characterizing and Modelling the Bond-Slip-Behavior of Steel-Bars in 3D Printed Engineered Cementitious Composites
- Zargar Seyed, Leicht Robert, Wagner Alan, Duarte José et al. (2025-01)
Beyond Trial and Error:
Toward Construction-Aware Early Design-Optimization Considering Robotic Capabilities
- Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
- Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
Experiment, Microstructure, and Mechanism Analysis
- Wang Yibo, Yan Ming, Yang Kun, Ao Chenyang et al. (2025-01)
Effect of Wall-Slip on the Extrusion-Characteristics of 3D Printing of Cementitious Materials
- Ahn Eunjong, Han Seongho, Shin Myoungsu, Khayat Kamal et al. (2025-01)
Novel Method to Evaluate 3D Printed Concrete Quality Using Ultrasonic Scatter-Energy-Techniques
- Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
- Zhang Tianjie, Wang Donglei, Lu Yang (2025-01)
A Navier-Stokes-Informed Neural Network for Simulating the Flow-Behavior of Flowable Cement-Paste in 3D Concrete Printing
- Çapunaman Özgüç, Farrokhsiar Paniz, Bilén Sven, Duarte José et al. (2025-01)
Vision-Based Sensing and Digital Twin-Technologies in Conformal 3D Concrete Printing:
Exploring Operational Accuracy, Adaptability, and Scalability, and Investigating Monitoring-Capabilities in Large-Scale Applications
- Caron Jean-François, Ducoulombier Nicolas, Demont Léo (2025-01)
Reinforcement of Printed Structures
- Do Duc, Diab Zeinab, Rémond Sébastien, Hoxha Dashnor (2025-01)
Numerical Simulation-Tools for 3D Printing
- Ducoulombier Nicolas, Bono Victor, Kachkouch Fatima, Jacquet Yohan et al. (2025-01)
From Laboratory to Practice
- Kuzmenko Kateryna, Roux Charlotte, Féraille Adélaïde (2025-01)
Environmental Impact of 3D Concrete Printing
- Mesnil Romain, Duballet Romain, Baverel Olivier (2025-01)
Structural Applications of 3D Printing
- Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies
- Perrot Arnaud, Jacquet Yohan (2025-01)
3D Concrete Printing by Extrusion and Filament-Deposition
- Perrot Arnaud, Jacquet Yohan, Amziane Sofiane (2025-01)
3D Concrete Printing
- Pierre Alexandre, Perrot Arnaud (2025-01)
Alternative Printing-Methods for Cementitious Materials
- Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
- Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
From Material-Design to Structural Bearing-Capacity-Assessment
- Oulkhir Fatima, Rihani Nadir, Akhrif Iatimad, Jai Mostapha (2025-01)
Integration of Earth-Based Materials in 3D Concrete Printing:
Physico-Chemical and Technological Characterization
- Shazad Qamar, Li Fangyuan (2025-01)
Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
A Combined Experimental and Numerical Study
- Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
Mechanical Properties and Environmental Impact Analysis
- Hägle Marius, Stöhr Ben, Stark Alexander (2025-01)
Increasing the Accuracy of Concrete Surfaces Through Robotic Milling
- Zhang Yonghong, Cui Suping, Yang Bohao, Wang Xinxin et al. (2025-01)
Research on 3D Printing Concrete Mechanical Properties-Prediction-Model Based on Machine-Learning
- Baş Sercan, Aydın Ozan, Bundur Zeynep, Guven Gursans (2025-01)
Building Information Modeling (BIM)-Based On-Site 3D Printer Position-Optimization and Path-Planning for Digital Fabrication
- Chen Meng, Li Jiahui, Zhang Tong, Zhang Mingzhong (2025-01)
3D Printability of Recycled Steel-Fiber-Reinforced Ultra-High-Performance Concrete
- Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites
- Hanžič Lucija, Štefančič Mateja, Šter Katarina, Zalar Serjun Vesna et al. (2025-01)
Collision Milling of Oil Shale Ash as Constituent Pretreatment in Concrete 3D Printing
- Li Leo, Zhang Guang-Hu, Kwan Albert (2025-01)
Exploring Submarine 3D Printing:
Enhancing Washout-Resistance and Strength of 3D Printable Mortar
- Elango K., Saravanakumar R., Vivek D., Yuvaraj S. et al. (2025-01)
A Critical Review of Fresh, Hardened and Durability Properties of 3D Printing Concrete
- Licciardello Lucia, Soto Alejandro, Kaufmann Walter, Metelli Giovanni (2025-01)
Determining the Strength of 3D Printed Concrete with the Modified Slant-Shear-Test
- Lori Ali, Mehrali Mehdi (2025-01)
Filament-Geometry-Control of Printable Geopolymer Using Experimental and Data-Driven Approaches
- Fernand Muhirwa, Yang Zhenjun (2025-01)
Structural and Microstructural Behavior of Novel 3DP-UHPFRC Beam with Discrete Steel-Fibers and Steel-FRP Composite Bar
- Posani Magda, Voney Vera, Odaglia Pietro, Du Yi et al. (2025-01)
Low-Carbon Indoor Humidity Regulation via 3D Printed Superhygroscopic Building Components
- Alam Shaurav, Gordon Stephen, Bassett Blake, Cobb Kevin et al. (2025-01)
Three-Dimensional Printing of Fly-Ash-Based Geopolymer Materials
- Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
- Vysochinskiy Dmitry, Madsen Gunnar, Lande Ingrid (2025-01)
An Experimental Study of Consistency and Strength Variation of 3D Printed Concrete Mixes
- Zhang Yonghong, Cui Suping, Wang Xinxin, Yang Bohao et al. (2025-01)
Microstructure and Performance of Recycled Wind Turbine Blade-Based 3D Printed Concrete
- Aydoğan Olcay, Kelek Bedirhan, Dittel Gözdem, Bhat Shantanu et al. (2025-01)
Performance of 3D Printed Mortar with Varying Textile Reinforcement Properties
- Brunner Kim, Stengel Thorsten, Kustermann Andrea (2025-01)
3D Particle-Bed Printing Using Different Cementitious Binders and Recycled Sand
- Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
3D Printed Concrete for Sustainable Construction:
A Review of Mechanical Properties and Environmental Impact
- Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
Case Study of 3D Printed Concrete as Compared to Conventional Construction:
Structural Comparison and Life Cycle Carbon Assessment
- Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
Advancing Structural Reinforcement in 3D Printed Concrete:
Current Methods, Challenges, and Innovations
- Obermeier Nico, Richter Christiane, Wiese Felix, Stengel Thorsten (2025-01)
Low Global-Warming-Potential and Resource-Efficient 3D Printing Cement-Based Concrete
- Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2025-01)
Assessment of the Suitability of Carbon Long Fibers as Reinforcement for Additively Manufactured Components
- Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
Reinforcement-Strategies for Additively Manufactured Concrete Elements:
Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
- Shahzad Qamar, Li Fangyuan (2025-01)
Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures
- Souza Eduarda, Rodrigues e Silva Rafaela, Ribeiro Borges Paulo (2025-01)
Overburden Materials from the Iron Mining as Raw Materials for AAM:
Preliminary Assessment of Mixes for 3D Concrete Printing
- Liu Qiong, Wang Qiming, Sun Chang, Li Jiawang et al. (2025-01)
Inter-Layer Shear Strength and Bonding Strength of Sinuous 3D Printed Mortar
- Roschli Alex, Post Brian, Wang Peter, Chesser Phillip et al. (2025-01)
The Cost of Scaling-Up in Large-Format Additive Manufacturing
- Li Chao, Petzold Frank (2025-01)
Ontology-Driven Mixture-of-Domain Documentation:
A Backbone Approach Enabling Question Answering for Additive Construction
- Schossler Rodrigo, Ullah Shafi, Alajlan Zaid, Yu Xiong (2025-01)
Data-Driven Analysis in 3D Concrete Printing:
Predicting and Optimizing Construction Mixtures
- Sun Hou-Qi, Zeng Jun-Jie, Hong Guang-Yao, Zhuge Yan et al. (2025-01)
3D Printed Functionally Graded Concrete Plates:
Concept and Bending Behavior
- Kandy Sharu, Remke Sebastian, Ranganathan Thiyagarajan, Wani Shubham et al. (2025-01)
Design and Function of Thermoresponsive-Ultrafast Stiffening Suspension Formulations for 3D Printing
- Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
- Tinoco Matheus, Cavalcante Tiago, Andrade Luiza, Araújo Olga et al. (2025-01)
Mix-Design-Strategies for 3D Printable Bio-Based Cementitious Composites Using Rice-Husk-Particles as Multifunctional Aggregates