2023-05¶

1. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
   Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
   A Critical Review
2. Lin Che, Mattei Gabriele, Cheibas Ina, Du Chaoyu et al. (2023-05)
   PneuPrint:
   3D Printing on Inflatables
3. Oh Sangwoo, Hong Geuntae, Choi Seongcheol (2023-05)
   Determining the Effect of Superabsorbent Polymers, Macrofibers, and Resting Time on the Rheological Properties of Cement Mortar Using Analysis of Variance:
   A 3D Printing Perspective
4. Codarin Sara (2023-05)
   Enhancing the Workforce in Construction:
   Robotic Concrete Printing in Detroit
5. Kokare Samruddha, Oliveira João, Godina Radu (2023-05)
   Life Cycle Assessment of Additive Manufacturing Processes:
   A Review
6. Oh Sangwoo, Choi Seongcheol (2023-05)
   Effects of Superabsorbent Polymers (SAP) On the Rheological Behavior of Cement Mortars:
   A Rheological Study on Performance Requirements for 3D Printable Cementitious Materials
7. Sasikumar Athira, Balasubramanian Dhayalini, Senthil Kumaran M., Govindaraj Vishnuvarthanan (2023-05)
   Effect of Coarse Aggregate Content on the Rheological and Buildability Properties of 3D Printable Concrete
8. Butkutė Karolina, Vaitkevičius Vitoldas, Šinka Māris, Augonis Algirdas et al. (2023-05)
   Influence of Carbonated-Bottom-Slag-Granules in 3D Concrete Printing
9. Forcael Eric, Martínez-Chabur Paula, Ramírez-Cifuentes Iván, García-Alvarado Rodrigo et al. (2023-05)
   Performance-Analysis of 3D Concrete Printing Processes Through Discrete-Event-Simulation
10. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-05)
    Sandwich-Structured Porous Concrete Manufactured by Mortar-Extrusion and Aggregate-Bed 3D Printing
11. Fernandez Letízia, Caldas Lucas, Mendoza Reales Oscar (2023-05)
    Environmental Evaluation of 3D Printed Concrete Walls Considering the Life Cycle Perspective in the Context of Social Housing
12. Ambily Parukutty, Kaliyavaradhan Senthil, Rajendran Neeraja (2023-05)
    Top Challenges to Widespread 3D Concrete Printing Adoption:
    A Review
13. Samudrala Manideep, Mujeeb Syed, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
    3D Printable Concrete for Energy-Efficient Buildings
14. Mujeeb Syed, Samudrala Manideep, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
    Development of Alkali-Activated 3D Printable Concrete:
    A Review
15. Shahzad Qamar, Li Fangyuan (2023-05)
    The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
    A Novel Approach for Practical Applications
16. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
    Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
17. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
    Off-Site Construction with 3D Concrete Printing
18. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-05)
    Wet Joint Performance of 3D Printed Concrete Beam Segments Under Flexural Loading
19. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
    Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
20. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
    Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
21. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay (2023-05)
    Effect of Magnetorheological Additives on the Buildability of 3D Concrete Printing
22. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
    Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
23. Mogaji Iseoluwa, Mewomo Modupe, Toyin James (2023-05)
    Key Barriers to the Adoption of 3D Printing Innovation in Construction:
    A Review of Empirical Studies
24. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
    Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
25. Bhushan Jindal Bharat, Jangra Parveen (2023-05)
    3D Printed Concrete:
    A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications
26. Leschok Matthias, Cheibas Ina, Piccioni Valeria, Seshadri Bharath et al. (2023-05)
    3D Printing Facades:
    Design, Fabrication, and Assessment Methods
27. Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
    Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application
28. Wang Li, Ye Kehan, Wan Qian, Li Zhijian et al. (2023-05)
    Inclined 3D Concrete Printing:
    Build-Up Prediction and Early-Age Performance-Optimization
29. Mohan Manu, Rahul Attupurathu, Stappen Jeroen, Cnudde Veerle et al. (2023-05)
    Assessment of Pore-Structure Characteristics and Tortuosity of 3D Printed Concrete Using Mercury-Intrusion-Porosimetry and X-Ray Tomography
30. Vergara Luis, Pérez Juan, Colorado Henry (2023-05)
    3D Printing of Ordinary Portland Cement with Waste-Wood-Derived Biochar Obtained from Gasification
31. Sobek Werner, Schmeer Daniel (2023-05)
    Graded Concrete (2. Generation):
    The Combination of Hollow-Core Construction with Trajectory-Based Reinforcement