Zhang Yu¶

1. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
   3D Printed Concrete with Red Mud Incorporation:
   Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
2. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
   Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
3. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
   Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
4. Wang Lingyu, Zhang Yu, Wang Zhiyong, Chen Juan et al. (2024-11)
   Additive Manufacturing in Construction Using Unmanned Aerial Vehicle:
   Design, Implementation, and Material-Properties
5. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
   Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
6. Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
   Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
7. Chen Yidong, Zhang Yunsheng, Liu Zhiyong, Zhang Wenhua et al. (2024-03)
   Quantitative Surface Quality Evaluation for 3D Printed Concrete with Coarse Aggregate Through 3D Scanning
8. Zhu Wenxuan, Zhu Shidong, Li Wangxin, Zhang Yu et al. (2023-11)
   A Study on the Printability of Manufactured Sand Concrete
9. Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
   Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
10. Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
    Inter-Layer Adhesion of 3D Printed Concrete:
    Influence of Layer Stacked Vertically
11. Chen Yu, Zhang Yu, He Shan, Liang Xuhui et al. (2023-06)
    Improving Structural Build-Up of Limestone-Calcined-Clay-Cement-Pastes by Using Inorganic Additives
12. Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
    3D Printed Concrete Permanent Formwork:
    Effect of Post-Cast Concrete Proportion on Interface Bonding
13. Chen Yidong, Zhang Wenhua, Zhang Yunsheng, Zhang Yu et al. (2023-03)
    3D Printed Concrete with Coarse Aggregates:
    Built-In-Stirrup Permanent Concrete Formwork for Reinforced Columns
14. Chen Yu, Liang Minfei, Zhang Yu, Li Zhenming et al. (2023-02)
    Can Superabsorbent Polymers Be Used as Rheology-Modifiers for Cementitious Materials in the Context of 3D Concrete Printing
15. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-12)
    Influence of the Pore Feature on the Water-Uptake in 3D Printed Concrete
16. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
    Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
17. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
    Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
18. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
    Correction
19. Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
    Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete
20. Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
    3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials
21. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
22. Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
    Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
23. Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
    Fresh Properties of a Novel 3D Printing Concrete Ink