Skip to content

Jiang Zhengwu

Information

ORCID
0000-0002-6464-2622
First Contribution
2020-10-10
Last Contribution
2025-09-17
Number Contributions
8
Number Citations
95

Top Co-Authors

  1. Zhang Yi (8)
  2. Ren Qiang (6)
  3. de Schutter Geert (6)
  4. van Tittelboom Kim (6)
  5. Zhu Yanmei (3)

Top Cited Articles

  1. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
    Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose (39)

Persons This Author Cites the Most

  1. de Schutter Geert (38)
  2. van Tittelboom Kim (30)
  3. Mechtcherine Viktor (25)
  4. Nerella Venkatesh (20)
  5. Sanjayan Jay (18)

Persons This Author Is Cited Most By

  1. de Schutter Geert (8)
  2. Tao Yaxin (8)
  3. Zhang Yi (8)
  4. van Tittelboom Kim (7)
  5. Ren Qiang (6)

  1. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
  2. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
    Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
  3. Zhang Yi, Tittelboom Kim, Tao Yaxin, Zhang Yiyuan et al. (2024-09)
    Understanding Carbonation in 3D Printed Cement-Based Materials with Exposed Bottom Surface
  4. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
    Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
    An Exploratory Study
  5. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
  6. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
    Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
  7. Jiang Zhengwu, Yang Qian, Zhu Yanmei, Zhang Yi et al. (2022-03)
    Evaluating the Stiffening Effect of CSA and Sodium Carbonate on the Printability of OPC Mortar
  8. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
    Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose