Skip to content

Kamakshi Tippabhotla

Information

ORCID
N/A
First Contribution
2021-11-12
Last Contribution
2025-12-15
Number Contributions
10
Number Citations
14

Top Co-Authors

  1. Subramaniam Kolluru (9)
  2. Paritala Spandana (4)
  3. Thakur Manideep (4)
  4. Kulkarni Omkar (3)
  5. McCoy Andrew (1)

Top Cited Articles

  1. Kocherla Amarteja, Kamakshi Tippabhotla, Subramaniam Kolluru (2021-11)
    In-Situ Embedded PZT Sensor for Monitoring 3D Concrete Printing:
    Application in Alkali-Activated Fly-Ash-Slag Geopolymers     (5)

Persons This Author Cites the Most

  1. Tan Ming (19)
  2. Bos Freek (18)
  3. Mechtcherine Viktor (18)
  4. Panda Biranchi (15)
  5. Salet Theo (14)

Persons This Author Is Cited Most By

  1. Qureshi Tanvir (1)
  2. Raj Shubham (1)
  3. Sglavo Vincenzo (1)
  4. Tan Ming (1)
  5. Xu Chengji (1)

  1. Subramaniam Kolluru, Maganty Sohanth, Kamakshi Tippabhotla, Ghandhi Dhruv et al. (2025-12)
    Design and Deployment of a Functionally Efficient 3D-Printed Concrete Bridge Developed by Form Optimization
  2. Kamakshi Tippabhotla, Chau Bao, Tugelbayev Aidyn, McCoy Andrew et al. (2025-10)
    Developing 3D Printable Concrete Using Quarry by-Products as Partial Replacement for Cement
  3. Paritala Spandana, Singh Prashant, Kamakshi Tippabhotla, Subramaniam Kolluru (2024-09)
    Assessment of Printability of Concrete Based on Packing of Aggregates
  4. Kamakshi Tippabhotla, Thakur Manideep, Subramaniam Kolluru (2024-07)
    Formulating Printable Concrete Mixtures Based on Paste-Rheology and Aggregate-Content:
    Application to Alkali-Activated Binders
  5. Kamakshi Tippabhotla, Subramaniam Kolluru (2024-05)
    Rheology-Control and 3D Concrete Printing with Fly Ash-Based Aqueous Nano-Silica Enhanced Alkali-Activated Binders
  6. Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
    Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete
  7. Kulkarni Omkar, Thakur Manideep, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
    Evaluation of Tensile Behavior of 3D Printed Concrete Assemblies with Reinforcement
  8. Thakur Manideep, Kulkarni Omkar, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
    Influence of Cold Joint on Fracture Behavior of 3D Printed Concrete
  9. Kamakshi Tippabhotla, Subramaniam Kolluru (2022-06)
    Developing Printable Fly-Ash-Slag Geopolymer Binders with Rheology Modification
  10. Kocherla Amarteja, Kamakshi Tippabhotla, Subramaniam Kolluru (2021-11)
    In-Situ Embedded PZT Sensor for Monitoring 3D Concrete Printing:
    Application in Alkali-Activated Fly-Ash-Slag Geopolymers