Flatt Robert¶

1. Das Arnesh, Wenger Cedric, Walpen Lukas, Flatt Robert (2025-02)
   Early-Age Hydration of Accelerated Low-Carbon Cements for Digital Fabrication
2. Gürel Şeyma, Chen Wei-Ting, Wangler Timothy, Lloret-Fritschi Ena et al. (2024-09)
   Scaling up in Digital Casting of Concrete:
   Towards Industry Integration
3. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
   Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
4. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
   Durability of 3D Printed Concrete:
   Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
5. Mahmoudi Matineh, Wangler Timothy, Flatt Robert (2024-09)
   Robustness of Digital Concrete:
   Effects of Temperature, Accelerator Type and Dosage
6. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
   Static Mixing for Set-on-Demand of Digital Concrete
7. Wangler Timothy, Patankar Yamini, Flatt Robert (2024-09)
   Sustainable Digital Concrete:
   Myth, Reality or Emerging Opportunity?
8. Zimmermann Stefan, Griego Danielle, Flatt Robert (2024-09)
   Visualizing Defects of Concrete 3D Printed Structures with Augmented Reality Based on Machine Learning-Driven Image-Analysis
9. Lowke Dirk, Anton Ana-Maria, Buswell Richard, Jenny Ercan et al. (2024-09)
   Digital Fabrication with Concrete Beyond Horizontal Planar Layers
10. Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
    Aluminate 2K Systems in Digital Concrete:
    Process, Design, Chemistry, and Outlook
11. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
12. Anton Ana-Maria, Lin Che, Skevaki Eleni, Wang Mingyang et al. (2024-04)
    Tor Alva:
    A 3D Concrete Printed Tower
13. Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
    Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete
14. Lloret-Fritschi Ena, Choma Joseph, Scotto Fabio, Szabó Anna et al. (2023-02)
    In-Crease:
    Less Concrete More Paper
15. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
    Eggshell Pavilion:
    A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
16. Das Arnesh, Reiter Lex, Mantellato Sara, Flatt Robert (2022-10)
    Early-Age Rheology and Hydration-Control of Ternary Binders for 3D Printing Applications
17. Jipa Mihail-Andrei, Reiter Lex, Flatt Robert, Dillenburger Benjamin (2022-07)
    Environmental Stress Cracking of 3D Printed Polymers Exposed to Concrete
18. Das Arnesh, Aguilar Sanchez Asel, Wangler Timothy, Flatt Robert (2022-06)
    Freeze-Thaw-Performance of 3D Printed Concrete:
    Influence of Interfaces
19. Reiter Lex, Anton Ana-Maria, Wangler Timothy, Dillenburger Benjamin et al. (2022-06)
    A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites
20. Wangler Timothy, Aguilar Sanchez Asel, Anton Ana-Maria, Dillenburger Benjamin et al. (2022-06)
    Two Year Exposure of 3D Printed Cementitious Columns in a High-Alpine Environment
21. Flatt Robert, Wangler Timothy (2022-05)
    On Sustainability and Digital Fabrication with Concrete
22. Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
    Additive Digital Casting:
    From Lab to Industry
23. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2022-04)
    Slow Penetration for Characterizing Concrete for Digital Fabrication
24. Ruffray Nicolas, Reiter Lex, Flatt Robert (2022-04)
    Overcoming Environmental Stress-Cracking of FDM 3D Printed Formwork for Counter-Pressure Casting of Concrete
25. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
    Effect of Processing on the Air-Void System of 3D Printed Concrete
26. Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
    A Chemical Process Engineering Look at Digital Concrete Processes:
    Critical Step Design, In-Line Mixing, and Scale-Up
27. Boscaro Federica, Quadranti Elia, Wangler Timothy, Mantellato Sara et al. (2022-02)
    Eco-Friendly, Set-on-Demand Digital Concrete
28. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
29. Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
    A 3D Concrete Printing Prefabrication Platform for Bespoke Columns
30. Anton Ana-Maria, Bedarf Patrick, Yoo Angela, Dillenburger Benjamin et al. (2020-09)
    Concrete Choreography:
    Prefabrication of 3D Printed Columns
31. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
    Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
    Ultra-Thin, 3D Printed Formwork
32. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
    Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete
33. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
34. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
    ACDC:
    The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
35. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
36. Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
    Setting-on-Demand for Digital Concrete:
    Principles, Measurements, Chemistry, Validation
37. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2020-04)
    Mastering Yield-Stress-Evolution and Formwork-Friction for Smart Dynamic Casting
38. Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
    Eggshell:
    Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
39. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
    Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
    A Real-Scale Architectural Demonstrator
40. Szabó Anna, Lloret-Fritschi Ena, Reiter Lex, Gramazio Fabio et al. (2019-09)
    Revisiting Folded Forms with Digital Fabrication
41. Das Arnesh, Reiter Lex, Wangler Timothy, Flatt Robert (2019-09)
    Hydration-Control of Ternary Cements for Digital Fabrication with Concrete
42. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
    Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture
43. Wangler Timothy, Scotto Fabio, Lloret-Fritschi Ena, Flatt Robert (2019-09)
    Residence-Time-Distributions in Continuous Processing of Concrete
44. Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
    Digital Concrete:
    A Review
45. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
46. Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
    Potentials of Steel-Fibers for Mesh Mould Elements
47. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
    Adapting Smart Dynamic Casting to Thin-Folded Geometries
48. Wangler Timothy, Flatt Robert (2018-09)
    Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication:
    Correction
49. Flatt Robert, Wangler Timothy (2018-08)
    Editorial for Special Issue on Digital Concrete
50. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
    The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete
51. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
52. Lloret-Fritschi Ena, Reiter Lex, Wangler Timothy, Gramazio Fabio et al. (2017-03)
    Smart Dynamic Casting:
    Slipforming with Flexible Formwork
53. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
    Digital Concrete:
    Opportunities and Challenges
54. Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
    Complex Concrete Structures:
    Merging Existing Casting Techniques with Digital Fabrication