Sun Junbo¶

1. Zhang Xin, Xu Xinglong, Liu Xianda, Sun Junbo et al. (2026-01)
   Enhancing Electromagnetic Wave Absorption in 3D-Printed Concrete with Superabsorbent Polymers for High Performance
2. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
   Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
3. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
   Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
4. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
   3D Printed Concrete with Red Mud Incorporation:
   Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
5. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
   Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
   A Case Study in China
6. Sun Junbo, Aslani Farhad, Mann Dhruv, Huang Bo et al. (2025-05)
   Mechanical and Piezoresistive Behaviour of 3D Printed Self-Sensing One-Way Concrete Slab
7. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wu Fei et al. (2025-03)
   Automated Analysis System for Micro-Defects in 3D Printed Concrete
8. Zhao Hongyu, Wang Xiangyu, Chen Zhaohui, Liu Xianda et al. (2025-02)
   Microcrack Investigations of 3D Printing Concrete Using Multiple Transformer Networks
9. Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
   Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
   Mechanical Properties and Environmental Impact Analysis
10. Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
    Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks
11. Zhao Hongyu, Jassmi Hamad, Liu Xianda, Wang Yufei et al. (2024-12)
    Artificial Intelligence-Based Microcracks Research in 3D Printing Concrete
12. Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
    Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
    An Eco-Friendly Substitute to Conventional Fine Aggregates
13. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
    3D Printed Concrete Incorporating Waste-Rubber:
    Anisotropic Properties and Environmental Impact-Analysis
14. Yuan Shuaihua, Duan Dengke, Sun Junbo, Yu Yi et al. (2024-08)
    Mechanical, Alkali Excitation, Hydrothermal Enhancement of 3D Printed Concrete Incorporated with Antimony-Tailings
15. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
    Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
16. Chen Zhaohui, Wang Zhenyue, Liao Minmao, Sun Junbo et al. (2024-07)
    Influence of Printing-Pattern on Bearing-Capacity of 3D Printed Concrete Hollow Structures
17. Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
    Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
    Experimental and Numerical Studies
18. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
    Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
19. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wang Yufei et al. (2024-04)
    Artificial Intelligence Powered Real-Time Quality Monitoring for Additive Manufacturing in Construction
20. Sun Junbo, Liu Shukui, Ma Zhangguo, Wang Di et al. (2024-03)
    3D Printed Lightweight Concrete Containing Surface-Pretreated Coal-Gangue
21. Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
    Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths
22. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
23. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
    Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
    A Sustainable Approach for Construction Materials
24. Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
    AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition
25. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
    Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
26. Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
    Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing
27. Liu Miao, Huang Yimiao, Wang Fang, Sun Junbo et al. (2021-05)
    Tensile and Flexural Properties of 3D Printed Jackets-Reinforced Mortar
28. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
    Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
29. Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
    Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer