Techman Mateusz¶

1. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
   Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
2. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
   Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
   Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
3. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
   Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
   Small- to Medium-Scale Wall Experiments
4. Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
   Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
   Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
5. Sikora Paweł, Rathnarajan Sundar, Federowicz Karol, Techman Mateusz et al. (2024-11)
   Use of Seawater as an Accelerator in 3D Printed Concrete
6. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
   Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
7. Sikora Paweł, Federowicz Karol, Techman Mateusz, Skibicki Szymon (2024-09)
   Fine Recycled Concrete Aggregates in 3D Printed Concrete
8. Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
   Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC
9. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
   Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
   Impact on 3D Printing Performance and Material-Properties
10. Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
    Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
11. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
    Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
    Cast versus Printed Specimens
12. Skibicki Szymon, Techman Mateusz, Federowicz Karol, Olczyk Norbert et al. (2021-12)
    Experimental Study of Hardened Young's Modulus for 3D Printed Mortar
13. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
    Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
14. Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
    Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper
15. Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
    Thermal-Humidity Parameters of 3D Printed Wall