Skip to content

2024-10

  1. Fasihi Ali, Libre Nicolas (2024-10)
    Interaction Between Material and Process-Parameters During 3D Concrete-Extrusion-Process
  2. Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
    Multi-Model-Based Additive Manufacturing:
    A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots
  3. Mackin Anthony, Hanoun Zaid, Migliorino Jenna, Ahmed Aly et al. (2024-10)
    Multi-Functional Additively Constructed Honeycomb Walls for Housing and Sheltering
  4. Zeng Jun-Jie, Hu Xianwen, Sun Hou-Qi, Liu Yue et al. (2024-10)
    Triaxial Compressive Behavior of 3D Printed PE-Fiber-Reinforced Ultra-High-Performance Concrete
  5. Händle Frank (2024-10)
    Additive Manufacturing by Extrusion in Ceramics
  6. Liu Bing, Cheng Xiao-Ming, Wang Lian-Gang, Qian Kai (2024-10)
    Compressive Performance of PVA Fiber-Reinforced 3D Concrete Printing Permanent Formwork Composite Columns Reinforced with BFRP-Bars
  7. Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
    Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis
  8. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2024-10)
    Sustainable Structures Unveiled:
    Navigating the Environmental Landscape of 3D Printing in Construction
  9. Eid Zainab, Almerbati Nehal (2024-10)
    Methodologies to Assess the Environmental Impact of 3D Printed Buildings Using Construction Waste
  10. Adamtsevich Liubov, Pustovgar Andrey, Adamtsevich Aleksey (2024-10)
    Assessing the Prospects and Risks of Delivering Sustainable Urban Development Through 3D Concrete Printing Implementation
  11. Placzek Gerrit, Schwerdtner Patrick (2024-10)
    A Global Snapshot of 3D Printed Buildings:
    Uncovering Robotic-Oriented Fabrication-Strategies
  12. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
    Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
  13. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-10)
    Geopolymer Composites for 3D Printing Applications:
    A Statistical Analysis Approach
  14. Bang Jin, Yim Hong (2024-10)
    Unbonded Inter-Layer Evaluation in Freshly 3D Printed Concrete Using Electrical Resistivity Measurements
  15. Li Zhengrong, Xing Wenjing, Wang Heyu, Sun Jingting (2024-10)
    The Effect of Heterogeneous Geometry on Steady-State Heat Transfer in Extrusion-Based 3D Printed Structures
  16. Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
    Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
    Implications for Standardization in Additive Construction
  17. Lim Sean, Tan Ming (2024-10)
    A Rheological Model for Concrete Additive Manufacturing
  18. Lu Yu, Chen Haohua, Tomac Ingrid, McCartney John (2024-10)
    Analytical and Numerical Investigation of Gravity Anchors for Floating Photovoltaic Systems
  19. Nakanishi Reina, Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki et al. (2024-10)
    Design and Development of a Shape Measurement System for 3D Construction Printing with a Manipulator
  20. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-10)
    Sustainable Production of Complex Precast Concrete Elements Without Demolding Drafts Using Concrete Extrusion and Processing
  21. Lindner Marco, Gliniorz Ralf, Funke Henrik, Männel Mike et al. (2024-10)
    Tool-Development for Pre-Cast Concrete Elements in Robot-Assisted Flow-Production
  22. Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-10)
    Material-Saving Concrete Ceiling Made from 3D-Printed Interlocking Blocks
  23. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-10)
    Efficient Production of Pre-Cast Concrete Staircases Using Additive-Manufactured, Component-Integrated Formworks Systems
  24. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2024-10)
    Concrete-Extrusion Using Sustainable Cement Alternatives
  25. Josa Irene, Fuente Albert (2024-10)
    Traditional and Modern Methods of Construction:
    Comparative Study of the Sustainability of Single‐Family Homes
  26. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
    Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
    Shear Properties and Enhancement Methods
  27. Raza Saim, Manshadi Behzad, Sakha Mahsa, Widmann Robert et al. (2024-10)
    Load Transfer Behavior of 3D Printed Concrete Formwork for Ribbed Slabs Under Eccentric Axial Loads
  28. Yu Ke-Ke, Zhao Tai-Qi, Lou Qi-Ling, Ping Yang (2024-10)
    Recycled PET Fibers with Dopamine Surface Modification for Enhanced Inter-Layer Adhesion in 3D Printed Concrete
  29. Lin Yini, Yan Jiachuan, Sun Ming, Han Xiaoyu et al. (2024-10)
    Inter-Layer Cohesion in 3D Printed Concrete:
    The Role of Width-to-Height-Ratio in Modulating Transport Properties and Pore-Structure
  30. Wysoczanski Andrzej (2024-10)
    The Use of Additively Manufactured Concrete Objects
  31. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
    Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
    Rheological Regulation and Fiber Hybridization
  32. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
    Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
  33. Florenzano Daniele, Sumini Valentina, Naboni Roberto (2024-10)
    Automated Design and Additive Construction of Regolith-Shielded Lunar Habitats
  34. Peng Chengming, Yang Zhenjun, Li Hui (2024-10)
    A Predictive Model for Interlayer-Water-Evolution and Experimental Validation of 3D Printed Cementitious Materials
  35. Seo Eun-A, Lee Hojae (2024-10)
    Influence of Chemical Admixtures on Buildability and Deformation of Concrete for Additive Manufacturing
  36. Cai Jianguo, Wang Jingsong, Zhang Qian, Du Caixia et al. (2024-10)
    State of the Art of Mechanical Properties of 3D Printed Concrete
  37. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
    Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
  38. Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
    Micro/Nano Additives in 3D Printing Concrete:
    Opportunities, Challenges, and Potential Outlook in Construction Applications
  39. Raza Muhammad, Zhong Ray (2024-10)
    Integration of Additive Manufacturing, Lean and Green Construction:
    A Conceptual Framework
  40. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
    Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
    Hydration, Shrinkage and Early-Age Performance
  41. Rodriguez Fabian, Moini Mohamadreza, Agrawal Shubham, Williams Christopher et al. (2024-10)
    Mechanical Response of Small-Scale 3D Printed Steel-Mortar Composite Beams
  42. Varela Hugo, Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-10)
    3D Printable Cement-Based Composites Reinforced with Sisal-Fibers:
    Rheology, Printability and Hardened Properties
  43. Bao Ta, Yeakleang Muy, Abdelouhab Sandra, Courard Luc (2024-10)
    Testing Mortars for 3D Printing:
    Correlation with Rheological Behavior
  44. Aminpour Nima, Memari Ali (2024-10)
    Numerical and Experimental Study on Reinforced 3DCP Walls Filled with Lightweight Concrete
  45. An Ning, Wang Huai, Le Liu, Li Shuo et al. (2024-10)
    Real-Time Monitoring of Extrudability and Buildability in 3D Concrete Printing Based on Target Detection Method
  46. Gholami Shayan, Kim Yong-Rak, Salehi Faezeh (2024-10)
    Strengthening and 3D Printing of Magnesium-Silicate-Hydrate Binder for Martian Construction
  47. Hoang Pham, Moon Hyosoo, Ahn Yonghan (2024-10)
    Optimizing 3D Printed Concrete Mixtures for Extraterrestrial Habitats:
    A Machine Learning Framework
  48. Sorgenfrei Reese, Zandifaez Peyman, Zhou Hongyu, Fiske Michael (2024-10)
    Investigating the Effect of Air-Voids on the Mechanical Properties of 3D Printable Cementitious Composites
  49. Tabassum Nusrat, Duarte José (2024-10)
    Exploring Multi-Directional 3D Printing for Enclosures on Earth and Beyond:
    Sensitivity-Analysis of Buildability
  50. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
    Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
  51. Oliveira Francisco, Picelli Sanches Renato, Nelli Silva Emílio, Barari Ahmad et al. (2024-10)
    Topology-Optimization in 3D Concrete Printing to Reduce Greenhouse Gas Emissions
  52. Du Guoqiang, Qian Ye (2024-10)
    Bio-Inspired 3D Printing of Strain-Hardening Cementitious Composites Reticulated Shell-Roofs
  53. Du Guoqiang, Qian Ye (2024-10)
    Bio-Inspired Innovations in 3D Concrete Printing:
    Structures, Materials and Applications
  54. Placzek Gerrit, Schwerdtner Patrick (2024-10)
    Comparison of Machine- and Performance Specifications of Concrete 3D Printers
  55. Sahai Rajan, Bisht Ravindra, Kumar Shivam, Singh Siddharth et al. (2024-10)
    Modeling and Simulation of 3D Printed Concrete Layers and Validation Using Gantry Robotic Printer
  56. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
    Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
    Sorption and Microstructural Perspective
  57. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
    Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
  58. Li Shuai, Lan Tian, Nguyen Hung-Xuan, Tran Jonathan (2024-10)
    Frontiers in Construction 3D Printing:
    Self-Monitoring, Multi-Robot, Drone-Assisted Processes
  59. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
    Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
  60. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
    3D Printed Concrete Incorporating Waste-Rubber:
    Anisotropic Properties and Environmental Impact-Analysis
  61. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
    Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
  62. Gyawali Biva, Haghnazar Ramtin, Akula Pavan, Alba Kamran et al. (2024-10)
    A Review on 3D Printing with Clay and Sawdust/Natural Fibers:
    Printability, Rheology, Properties, and Applications
  63. Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
    An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers
  64. Rahemipoor Sahand, Bayat Mohammad, Hasany Masoud, Mehrali Mohammad et al. (2024-10)
    Micro-Encapsulated Phase-Change-Material in 3D Printable Mortars
  65. Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
    Preparation of 3D Printed Concrete from Solid Waste:
    Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
  66. Chen Yuning, Xia Kailun, Dong Enlai, Cao Ruilin et al. (2024-10)
    A Mechanical Characteristic Capture-Method Considering Printing-Configurations for Buildability-Modeling in Concrete 3D Printing
  67. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
    Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  68. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-10)
    Influence of Printing-Parameters on the Durability of 3D Printed Limestone-Calcined-Clay-Cement Mortar:
    Overlap Between Filaments and Nozzle-Offset
  69. Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
    3D Constructing:
    Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation