Skip to content

2023-12

  1. Slavcheva Galina, Artamonova Olga, Kotova Кristina, Shvedova Mariia et al. (2023-12)
    Pull-Out Behavior of Steel- and Carbon-Fibers in 3D Printable Cement Matrices of Various Compositions
  2. Khan Shayan, Ghazi Syed, Amjad Hassan, Imram Muhammad et al. (2023-12)
    Emerging Horizons in 3D Printed Cement-Based Materials with Nano-Material-Integration:
    A Review
  3. Lucen Hao, Long Li, Shipeng Zhang, Huanghua Zhang et al. (2023-12)
    The Synergistic Effect of Greenhouse Gas CO2 and Silica-Fume on the Properties of 3D Printed Mortar
  4. Pham Thi, Trinh Duy, Do Trong, Huang Jie (2023-12)
    Flexural Behavior of Printed Concrete Wide Beams with Dispersed Fibers-Reinforced
  5. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
    Additive Manufacturing of Earth-Based Materials:
    A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
  6. Li Feng, Zhang Rongrong, Zhou Siqi, Zhu Xingyi (2023-12)
    Printability and Hardening Performance of Three-Dimensionally-Printed Geopolymer Based on Lunar Regolith Simulant for Automated Construction of Lunar Infrastructure
  7. Ruitinga Volker, Avramiea Emma (2023-12)
    Custom-Made Print-Heads Empowering 3D Printed Concrete:
    Innovations in Digital Design and Fabrication of Complex Prefabricated Elements
  8. Schwartz Thibault (2023-12)
    HAL Robotics:
    From Automated Architectural Design for Fabrication, to Architecting Automated Manufacturing Systems
  9. Li Haodao, Addai-NImoh Alfred, Kreiger Eric, Khayat Kamal (2023-12)
    Methodology to Design Eco-Friendly Fiber-Reinforced Concrete for 3D Printing
  10. Fahim Abdullah, Admassu Natnael, Dailey Garret, Moradllo Mehdi (2023-12)
    Application of Cellulose-Nano-Crystals in 3D Printed Alkali-Activated Cementitious Composites
  11. Alyami Mana, Khan Majid, Javed Muhammad, Ali Mujahid et al. (2023-12)
    Application of Metaheuristic Optimization Algorithms in Predicting the Compressive Strength of 3D Printed Fiber-Reinforced Concrete
  12. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
    Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
  13. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
    Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
  14. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
    Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
  15. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2023-12)
    Methodology for Formulating Low-Carbon Printable Mortar Through Particles-Packing-Optimization
  16. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
    Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
  17. Vasilić Ksenija (2023-12)
    Standardization Aspects of 3D Printing with Concrete
  18. Kaya Yusuf, Orr Lachlan, Kocer Basaran, Kovac Mirko (2023-12)
    Aerial Repair and Aerial Additive Manufacturing
  19. Yan Zitong, Zeng Jun-Jie, Zhuge Yan, Liao Jinjing et al. (2023-12)
    Compressive Behavior of FRP-Confined 3D Printed Ultra-High-Performance Concrete Cylinders
  20. Yang Yan, Wu Hangzi, Han Lifang, Huang Qingling et al. (2023-12)
    Investigation on Geometric and Surface Finish Quality of 3D Concrete Printed Walls with Hollow Section
  21. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2023-12)
    Mixing Approach for 3D Printable Concrete:
    Method of Addition and Optimization of Superplasticizer Dosage
  22. Liu Qiang, Jiang Quan, Yu Rang, Rong Yao et al. (2023-12)
    Extrusion 3D Printing Circular and Horseshoe Tunnel Physical Models:
    A Comparative Study of Deformation and Brittle Failure
  23. Natanzi Atteyeh, McNally Ciaran (2023-12)
    Experimental Investigation of Low-Carbon 3D Printed Concrete
  24. Christ Julian, Perrot Arnaud, Ottosen Lisbeth, Koss Holger (2023-12)
    Rheological Characterization of Temperature-Sensitive Biopolymer-Bound 3D Printing Concrete
  25. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2023-12)
    3D Concrete Printing in Air and Under Water:
    A Comparative Study on the Buildability and Inter-Layer Adhesion
  26. Li Yeou-Fong, Tsai Pei-Jen, Syu Jin-Yuan, Lok Man-Hoi et al. (2023-12)
    Mechanical Properties of 3D Printed Carbon Fiber-Reinforced Cement Mortar
  27. Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
    Mechanical Properties of 3D Printed Concrete Components:
    A Review
  28. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
    Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
  29. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
    Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
    A Review
  30. Dey Dhrutiman, Nguyen Vuong, Nguyen-Xuan Hung, Srinivas Dodda et al. (2023-12)
    Flexural Performance of 3D Printed Concrete Structure with Lattice-Infills
  31. Panda Biranchi, Shakor Pshtiwan, Lagaros Nikos (2023-12)
    Advanced Modelling for Additive Manufacturing in Construction
  32. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Concrete Additive Manufacturing
  33. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Powder-Bed Additive Manufacturing
  34. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Shotcrete Additive Manufacturing
  35. Wangler Timothy (2023-12)
    Opportunities and Future Perspectives
  36. Rennen Philipp, Gantner Stefan, Dielemans Gido, Bleker Lazlo et al. (2023-12)
    Robotic Knitcrete:
    Computational Design and Fabrication of a Pedestrian Bridge Using Robotic Shotcrete on a 3D Knitted Formwork
  37. Suthar Mahendrabhai, Shariff Najeeb, Nanthagopalan Prakash (2023-12)
    Performance-Assessment of Topologically Optimised 3D Printable Concrete Sewer Cross-Section Using Finite Element Simulation
  38. Böhler David, Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
    Shotcrete 3D Printing:
    Effect of Material‐Process-Interaction on the Global and Local Material Density
  39. Coward Andy, Sørensen Jesper (2023-12)
    3D Printed Concrete Beams as Optimised Load Carrying Structural Elements:
    The Minimass Beam
  40. Eugenin Claudia, Cuevas Villalobos Karla, Navarrete Iván (2023-12)
    Temperature-Dependance of 3D Printed Concrete Produced with Copper-Tailings
  41. Felfili Guimarães Gabriela, Oliveira Marcos, Almeida Martinelli Juliana (2023-12)
    Performance-Evaluation of the 3D Printing System Through Fault-Tree-Analysis-Method
  42. Freund Niklas, David Martin, Böhler David, Mai (née Dressler) Inka et al. (2023-12)
    Shotcrete 3D Printing:
    Interaction of Nozzle Geometry, Homogeneity and Hardened Concrete Properties
  43. Funke Henrik, Lindner Marco, Rudolph Enrico, Gelbrich Sandra (2023-12)
    Additive Manufacturing Technology for the Continuous Production of Precision Concrete Elements
  44. Gelbrich Sandra, Abstoß Marvin, Rudolph Enrico, Funke Henrik (2023-12)
    Complex Concrete Elements for the Production of Recyclable Formwork by Extrusion and Milling
  45. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2023-12)
    Near‐Nozzle Mixing for Additive Manufacturing of Cementitious Mortar:
    A Homogeneity Study
  46. Herding Friedrich, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
    Reduction of the Cement Content in Selective Cement-Activation
  47. Kalthoff Matthias, Cruz Cynthia, Raupach Michael, Matschei Thomas (2023-12)
    Material‐Minimized Construction with Extruded Textile-Reinforced Concrete
  48. Kruppa Henning, Kalthoff Matthias, Vollpacht Anya, Matschei Thomas (2023-12)
    Development of an Alkali-Activated Binder for the Extrusion Process
  49. Lindner Marco, Gliniorz Ralf, Männel Mike, Garbe Daniel et al. (2023-12)
    Tool-Developments for Additive Manufacturing-Processes with Anchor for the Modern Flow-Production
  50. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2023-12)
    Effect of Grain-Size and Layer-Thickness on Hardened State Properties in Selective Cement-Activation
  51. Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
    Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing
  52. Remke Sebastian, Sant Gaurav, Gädt Torben (2023-12)
    Investigation of a Hybrid Binder System for Large-Scale 3D Printing
  53. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
    Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
    Effect of Temperature on the Mechanical Performance
  54. Warsi Syed, Srinivas Dodda, Panda Biranchi, Biswas Pankaj (2023-12)
    Investigating the Impact of Coarse Aggregate Dosage on the Mechanical Performance of 3D Printable Concrete
  55. Bos Derk, Wolfs Robert (2023-12)
    A Quality-Control Framework for Digital Fabrication with Concrete
  56. Wu Yuching, Chen Huaikun, Zhi Peng, Zhu Peng et al. (2023-12)
    Effect of 3D Printing Geometrical Monocline on Behaviors of Curved Timoshenko Beams Based on Isogeometric Analyses
  57. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
    Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
  58. Khalilidermani Mitra, Knez Dariusz (2023-12)
    A Survey on Extraterrestrial Habitation Structures with a Focus on Energy-Saving 3D Printing Techniques
  59. Acuña Tomás, Avendaño Martín, García-Alvarado Rodrigo, Banda Pablo et al. (2023-12)
    Parametric Design of Multipurpose 3D Printed Walls Based on Roberto Matta´s Drawings
  60. Calderon-Cordova Carlos, Sarango Leonardo, Chamba Dennis, Sarango Roger et al. (2023-12)
    Performance-Analysis of Motion-Control-Algorithms of an Industrial-Robot-Arm Applied to 3D Concrete Printing Systems
  61. Nóbrega Thiers, Henriques Gonçalo, Passaro Andres (2023-12)
    3D Printing for Architecture:
    Organic Integration of Algorithm, Machine and Material-Paste-Manufacture
  62. Pazols Maximiliano, Raspall Félix (2023-12)
    Terra Fibrosum:
    Continuous Fibers Reinforcement System for Robotized 3D Printing with Earth for Architecture
  63. Pessoa Ana Sofia, Jesus Manuel, Rangel Carolina, Guimarães Ana et al. (2023-12)
    Preliminary Study of the Application of Thermal Mortar in 3D Printed Concrete Walls
  64. Qamar Mu'ath, Yaghmour Emad, Wang Xingjian, Naito Clay et al. (2023-12)
    Use of 3D Printed Concrete Components for Thermal Energy Storage
  65. Vargas José (2023-12)
    Spatially Graded Modeling:
    An Integrated Workflow For 3D Concrete Printing