Rahul Attupurathu¶

1. Tao Yaxin, Zhang Yi, Mohan Manu, Dai Xiaodi et al. (2025-05)
   Waste-Derived Aggregates in 3D Printable Concrete:
   Current Insights and Future Perspectives
2. Sreenivas Gagan, Rizzieri Giacomo, Bhattacherjee Shantanu, Jain Smrati et al. (2024-11)
   Experimental and Numerical Assessment of Layer Deformation in a 3D Printed Concrete Element
3. Mikhalev Daniil, Fakhrayee Nejad Siamak, Ng Serina, Bose Baishakhi et al. (2024-09)
   Practical Insights and Advances in Concrete Pumping
4. Kurup Davya, Rahul Attupurathu (2024-09)
   Early-Age Shrinkage Measurement in 3D Printed Con-Crete by Digital Image Correlation:
   Influence of Spray Paints
5. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
   Static Mixing for Set-on-Demand of Digital Concrete
6. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
   Migration of Particles Suspended in Yield-Stress Fluids:
   Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
7. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2024-02)
   Hydration and Microstructure of Calcium-Sulfoaluminate-Portland-Cement Binder Systems for Set-on-Demand Applications
8. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-10)
   Influence of Rheology on Mixing Homogeneity and Mechanical Behavior of Twin-Pipe 3D Printable Concrete
9. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
   Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
10. Mohan Manu, Rahul Attupurathu, Stappen Jeroen, Cnudde Veerle et al. (2023-05)
    Assessment of Pore-Structure Characteristics and Tortuosity of 3D Printed Concrete Using Mercury-Intrusion-Porosimetry and X-Ray Tomography
11. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
    Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing
12. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
    Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
13. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
    Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
14. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2022-06)
    Salt-Scaling-Resistance of 3D Printed Concrete
15. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
    Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
    An Application in Extrusion-Based Concrete 3D Printing
16. Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
    Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures
17. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
    Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
18. Rahul Attupurathu, Mohan Manu, Schutter Geert, Tittelboom Kim (2021-10)
    3D Printable Concrete with Natural and Recycled Coarse Aggregates:
    Rheological, Mechanical and Shrinkage Behavior
19. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-09)
    Inter-Layer Bond and Porosity of 3D Printed Concrete
20. Putten Jolien, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-08)
    Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers
21. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
    Sustainable Materials for 3D Concrete Printing
22. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
23. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-01)
    Early-Age Hydration, Rheology and Pumping Characteristics of CSA Cement-Based 3D Printable Concrete
24. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
    Extrusion-Based Concrete 3D Printing from a Material Perspective:
    A State of the Art Review
25. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-10)
    Rheological and Pumping Behavior of 3D Printable Cementitious Materials with Varying Aggregate Content
26. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-07)
    Evaluating the Influence of Aggregate Content on Pumpability of 3D Printable Concrete
27. Rahul Attupurathu, Santhanam Manu (2020-02)
    Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates
28. Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
    A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials
29. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2019-08)
    Mechanical Characterization of 3D Printable Concrete
30. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
    3D Printable Concrete:
    Mixture-Design and Test-Methods