2018-09¶

1. Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
   In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction
2. Duarte José, Nazarian Shadi, Ashrafi Negar (2018-09)
   Designing Shelters for 3D Printing:
   A Studio Experiment
3. Schutter Geert, Lesage Karel (2018-09)
   Active Control of Properties of Concrete:
   A (P)Review
4. Fiske Michael, Edmunson Jennifer, Weite Edward, Fikes John et al. (2018-09)
   The Disruptive Technology That Is Additive Construction:
   System Development Lessons Learned for Terrestrial and Planetary Applications
5. Tan Kang (2018-09)
   The Framework of Combining Artificial Intelligence and Construction 3D Printing in Civil Engineering
6. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
   Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
7. Ayres Phil, Silva Wilson, Nicholas Paul, Andersen Thomas et al. (2018-09)
   SCRIM:
   Sparse Concrete Reinforcement in Meshworks
8. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-09)
   Thermally Informed Robotic Topologies:
   Profile 3D Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High-Resolution Surface Geometry
9. Battaglia Christopher, Miller Martin, Zivkovic Sasa (2018-09)
   Sub-Additive 3D Printing of Optimized Double Curved Concrete Lattice Structures
10. Bhooshan Shajay, Ladinig Johannes, Mele Tom, Block Philippe (2018-09)
    Function Representation for Robotic 3D Printed Concrete
11. Chee Ryan, Tan Wei, Goh Wei, Amtsberg Felix et al. (2018-09)
    Concrete Fabrication by Digitally Controlled Injection
12. Chen Mingxu, Li Laibo, Zheng Yan, Zhao Piqi et al. (2018-09)
    Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials
13. Cohen Zach (2018-09)
    Hold Up:
    Machine Delay in Architectural Design
14. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2018-09)
    Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars
15. Søndergaard Asbjørn, Feringa Jelle, Stan Florin, Maier Dana (2018-09)
    Realization of Topology Optimized Concrete Structures Using Robotic Abrasive Wire-Cutting of Expanded Polystyrene Formwork
16. Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
    Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
17. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2018-09)
    Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
18. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2018-09)
    Large-Scale Testing of Digitally Fabricated Concrete (DFC) Elements
19. Chen Yu, Veer Frederic, Çopuroğlu Oğuzhan, Schlangen Erik (2018-09)
    Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing
20. Craipeau Typhanie, Lecompte Thibault, Toussaint Fabrice, Perrot Arnaud (2018-09)
    Evolution of Concrete-Formwork Interface in Slipforming Process
21. Esnault Vivien, Labyad A., Chantin Marjorie, Toussaint Fabrice (2018-09)
    Experience in On-Line Modification of Rheology and Strength Acquisition of 3D Printable Mortars
22. Falliano Devid, Gugliandolo Ernesto, Domenico Dario, Ricciardi Giuseppe (2018-09)
    Experimental Investigation on the Mechanical Strength and Thermal Conductivity of Extrudable Foamed Concrete and Preliminary Views on Its Potential Application in 3D Printed Multilayer Insulating Panels
23. Jones Scott, Bentz Dale, Martys Nicos, George William et al. (2018-09)
    Rheological Control of 3D Printable Cement-Paste and Mortars
24. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2018-09)
    A Framework for Performance-Based Testing of Fresh Mixtures for Construction-Scale 3D Printing
25. Khalil Noura, Rémond Sébastien, Baz Bilal, Aouad Georges (2018-09)
    Characterization of 3D Printing Mortars Made with OPC-CSA Mixes
26. Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
    Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
27. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
28. Ma Siwei, Kawashima Shiho (2018-09)
    Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing
29. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
    Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
30. Marchment Taylor, Sanjayan Jay (2018-09)
    Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing
31. Martins Pedro, Campos Paulo, Nunes Sandra, Sousa José (2018-09)
    The Tectonics of Digitally Fabricated Concrete:
    A Case for Robotic Hot Wire-Cutting
32. Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
    Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
33. Mechtcherine Viktor, Nerella Venkatesh, Ogura Hiroki, Grafe Jasmin et al. (2018-09)
    Alternative Reinforcements for Digital Concrete Construction
34. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
    Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
35. Nematollahi Behzad, Xia Ming, Bong Shin, Sanjayan Jay (2018-09)
    Hardened Properties of 3D Printable One-Part Geopolymer for Construction Applications
36. Panda Biranchi, Mohamed Nisar, Tay Yi, Tan Ming (2018-09)
    Bond Strength in 3D Printed Geopolymer Mortar
37. Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
    Potentials of Steel-Fibers for Mesh Mould Elements
38. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
    The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials
39. Schröfl Christof, Nerella Venkatesh, Mechtcherine Viktor (2018-09)
    Capillary Water Intake by 3D Printed Concrete Visualised and Quantified by Neutron Radiography
40. Stefanoni Matteo, Angst Ueli, Elsener Bernhard (2018-09)
    Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete
41. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
    Adapting Smart Dynamic Casting to Thin-Folded Geometries
42. Vandenberg Aileen, Bessaies-Bey Hela, Wille Kay, Roussel Nicolas (2018-09)
    Enhancing Printable Concrete Thixotropy by High-Shear Mixing
43. Vantyghem Gieljan, Boel Veerle, Corte Wouter, Steeman Marijke (2018-09)
    Compliance, Stress-Based and Multi-Physics Topology-Optimization for 3D Printed Concrete Structures
44. Wangler Timothy, Flatt Robert (2018-09)
    Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication:
    Correction
45. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
    Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
46. Yang Pu, Nair Sooraj, Neithalath Narayanan (2018-09)
    Discrete Element Simulations of Rheological Response of Cementitious Binders as Applied to 3D Printing
47. Yu Jing, Leung Christopher (2018-09)
    Impact of 3D Printing-Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC)
48. Subrin Kévin, Bressac Thomas, Garnier Sébastien, Ambiehl Alexandre et al. (2018-09)
    Improvement of the Mobile Robot Location Dedicated for Habitable House Construction by 3D Printing
49. Lowke Dirk (2018-09)
    Concrete, the Predestined Building Material for Additive Manufacturing
50. Ghaffar Seyed, Mullett Paul (2018-09)
    Commentary:
    3D Printing Set to Transform the Construction Industry