2024-01
- Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
Numerical Modeling and Experimental Validation
- Mengistu Girum, Nemes Rita (2024-01)
Recycling 3D Printed Concrete Waste for Normal Strength Concrete Production
- Prem Prabhat, Ambily Parukutty, Kumar Shankar, Ghodke Swapnil (2024-01)
A Theoretical Model to Predict the Structural Buildability of 3D Printable Concrete
- Delavar Mohammad, Chen H., Sideris Petros (2024-01)
Analysis and Design of 3D Printed Reinforced Concrete Walls Under In-Plane Quasi-Static Loading
- Bianchi Iacopo, Volpe Stelladriana, Fiorito Francesco, Forcellese Archimede et al. (2024-01)
Life Cycle Assessment of Building Envelopes Manufactured Through Different 3D Printing Technologies
- Dulaj Albanela, Salet Theo, Lucas Sandra (2024-01)
A Study of the Effects of MWCNTs on the Fresh and Hardened State Properties of 3D Printable Concrete
- Panțiru Alexandru, Luca Bogdan, Bărbuța Marinela (2024-01)
Investigations Regarding Concrete Mixes Suitable for 3D Printing
- Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
Towards Full Automation in 3D Concrete Printing Construction:
Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
- Roschli Alex, Borish Michael, Barnes Abby, Wang Peter et al. (2024-01)
Tool-Path Considerations for Extrusion:
Pellet, Filament, Concrete, and Thermoset
- Vaněk Vojtěch, Chomová Štěpánka, Pěnčík Jan (2024-01)
Additive Technologies in Construction:
Shifting the Paradigm of Building
- Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
- Buson Márcio, Varum Humberto, Rezende Marco (2024-01)
First Impressions on Three-Dimensional Printing with Earth-Based Mortar at the Faculty of Engineering of the University of Porto
- Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2024-01)
Aerial Additive Manufacturing with Multiple Autonomous Robots:
Correction
- Polychronopoulos Nickolas, Sarris Ioannis, Vlachopoulos John (2024-01)
Flow-Analysis of Screw-Extrusion in Three-Dimensional Concrete Printing
- Prihar Arjun, Garlock Maria, Najmeddine Aimane, Moini Mohamadreza (2024-01)
Mechanical Performance of Sinusoidally Architected Concrete Enabled by Robotic Additive Manufacturing
- Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
Spray-Based 3D Concrete Printing-Parameter Design-Model:
Actionable Insight for High Printing Quality
- Moini Mohamadreza (2024-01)
Perspectives in Architected Infrastructure Materials
- Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
A Review
- Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
- Tao Yaxin, Zhang Yi, Schutter Geert, Tittelboom Kim (2024-01)
Interfacial Bonding of 3D Printable Concrete with Chemically Reactive Coating for Automatic Repair
- Fasihi Ali, Libre Nicolas (2024-01)
From Pumping to Deposition:
A Comprehensive Review of Test-Methods for Characterizing Concrete-Printability
- Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures
- Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
- Altıparmak Sadettin, Daminabo Samuel (2024-01)
Suitability-Analysis for Extrusion-Based Additive Manufacturing Process
- Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete
- Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
A State of the Art Review
- Yu Hao, Zhang Weiwei, Yin Binbin, Sun Weikang et al. (2024-01)
Modeling Extrusion-Process and Layer-Deformation in 3D Concrete Printing via Smoothed Particle-Hydrodynamics
- Dong Wei, Wang Junfeng, Hang Meiyan, Qu Shuqiang (2024-01)
Research on Printing Parameters and Salt-Frost-Resistance of 3D Printing Concrete with Ferrochrome-Slag and Aeolian Sand
- Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
- Özalp Fatih (2024-01)
Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
- Wang Qinghua, Xu Jinggang, Feng Duo, Li Wei et al. (2024-01)
Properties and Printability Evaluation of Three-Dimensional Printing Magnesium-Oxychloride Cement by Fully Utilizing Aeolian-Sand
- Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
- Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
- Liu Qiong, Cheng Shengbo, Peng Bin, Chen Kailun et al. (2024-01)
The Buildability and Flexural Properties of 3D Printed Recycled Mortar Reinforced with Synchronized Steel-Cable Under Different Reinforcement Ratios
- Zhu Ronghua, Egbe King-James, Salehi Hadi, Shi Zhongtian et al. (2024-01)
Eco-Friendly 3D Printed Concrete with Fine Aggregate Replacements:
Fabrication, Characterization and Machine Learning Prediction
- Rogers Helen, Srivastava Mohit, Tsakou Myriam-Elissavet, Prashad Anisha (2024-01)
Sustainable Supply Chain Models for 3D Printed Houses
- Sedghi Reza, Rashidi Kourosh, Hojati Maryam (2024-01)
Large-Scale 3D Wall Printing:
From Concept to Reality
- Zhang Nan, Sanjayan Jay (2024-01)
Quick Nozzle Mixing Technology for 3D Printing Foam-Concrete
- Gong Lei, Yuan Philip (2024-01)
ISOMORPHISM:
Stylized Translations of 2D Prototype in Additive Clay Printing
- Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
- Chadha Kunaljit, Dubor Alexandre, Cabay Edouard, Tayoun Yara et al. (2024-01)
Additive Manufacturing for the Circular Built Environment:
Towards Circular Construction with Earth-Based Materials
- Duan Zhenhua, Deng Qi, Xiao Jianzhuang, Lv Zhenyuan et al. (2024-01)
Experimental Realization on Stress-Distribution Monitoring During 3D Concrete Printing
- Meere Hani, Yan Shuaxing, Wang Dongpo, Bi Yuzhang (2024-01)
Behavior of Traditional Concrete Dams and Three-Dimensional Printed Concrete Dams Under the Debris Flow Impact
- Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
- Raza Saim, Triantafyllidis Zafiris, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-01)
Seismic Performance of Fe-SMA Pre-Stressed Segmental Bridge Columns with 3D Printed Permanent Concrete Formwork
- Westerlind Helena, Vargas José, Silfwerbrand Johan (2024-01)
Towards the Application of Mesostructures in 3D Concrete Printing:
Evaluating Load-bearing Performance
- Neri Manuela, Licciardello Lucia, Reggia Adriano, Pilotelli M. et al. (2024-01)
Improving the Energy Performance of a 3D Printed Wall Using Recycled Material