Sonebi Mohammed¶

1. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud (2026-01)
   Effect of Fly Ash, Basalt Fiber and Attapulgite Nanoclay on the Fresh Properties, Rheology and Shrinkage Behaviour of Printable Concrete
2. Sonebi Mohammed, Kaushik Sandipan, Amziane Sofiane, Hamill Gerard (2025-06)
   Optimization of Rheological and Hardened Properties of 3D Concrete Printing
3. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2024-09)
   Evaluation of Basalt-Fibers and Nano-Clays to Enhance Extrudability and Buildability of 3D Printing Mortars
4. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2023-09)
   Effect of Nano-Clay on the Printability of Extrusion-Based 3D Printable Mortar
5. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2023-07)
   Rheology Characterization of 3D Printing Mortars with Nano-Clays and Basalt-Fibers
6. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
   Review of Advances in 3D Printing Technology of Cementitious Materials:
   Key Printing Parameters and Properties Characterization
7. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
   Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
8. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
   Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
9. Abdalqader Ahmed, Sonebi Mohammed, Dedenis Marie, Amziane Sofiane et al. (2022-06)
   Mechanical Performance of 3D Printed Concrete Containing Fly-Ash, Metakaolin and Nano-Clay
10. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-02)
    Influence of Nano-Clay on the Fresh and Rheological Behavior of 3D Printing Mortar
11. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
12. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
    Properties and Testing of Printed Cement-Based Materials in Hardened State
13. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
14. Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
    Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
15. Bohuchval Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2020-12)
    Effect of Metakaolin and Natural Fibers on Three-Dimensional Printing Mortar
16. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
    Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
17. Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
    Nailing of Layers:
    A Promising Way to Reinforce Concrete 3D Printing Structures
18. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
19. Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2019-04)
    Mechanical Behavior of 3D Printed Cement Materials