2022-10¶

1. D'Haese Romain, Carpentier Olivier, Dubois Vincent, Chafei Sawsen et al. (2022-10)
   3D Printable Materials Made with Industrial Byproducts:
   Formulation, Fresh and Hardened Properties
2. Zhao Yu, Yang Guang, Zhu Lingli, Ding Yahong et al. (2022-10)
   Effects of Rheological Properties and Printing Speed on Molding Accuracy of 3D Printing Basalt-Fiber Cementitious Materials
3. Chandrasekar Ravekumar, Gkantou Michaela, Nikitas Georgios, Hashim Khalid et al. (2022-10)
   Integration of 3D Concrete Printing in the Construction Industry:
   A Short Review
4. Nguyen Vuong, Liu Junli, Li Shuai, Zhang Guomin et al. (2022-10)
   Modelling of 3D Printed Bio-Inspired Bouligand Cementitious Structures Reinforced with Steel-Fibers
5. Septiansyah Fadlika, Prasetya Sonki, Nursanto Djoko (2022-10)
   Control and Electrical System Design Consideration for a 3D Concrete Printer
6. Dörrie Robin, Laghi Vittoria, Arrè Lidiana, Kienbaum Gabriela et al. (2022-10)
   Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures
7. García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda Pablo (2022-10)
   Development of Variable Residential Buildings with 3D Printed Walls
8. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-10)
   The Fresh and Hardened Properties of 3D Printing Cement-Base Materials with Self-Cleaning Nano-TiO2:
   An Exploratory Study
9. Wang Dingyi, Zhang Tingting, Guo Xudong, Ling Dayi et al. (2022-10)
   The Potential of 3D Printing in Facilitating Carbon Neutrality
10. Hahlbrock David, Braun Michael, Heidel Robin, Lemmen Patrik et al. (2022-10)
    Cable Robotic 3D Printing:
    Additive Manufacturing on the Construction Site
11. Khan Shoukat, Koç Muammer (2022-10)
    Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
    The Underlying Physics, Potential, and Challenges
12. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-10)
    In-Line Activation of Geopolymer-Slurry for Concrete 3D Printing
13. Walker Ian, Krovi Venkat, Peerzada Abdul, Raman Adhiti et al. (2022-10)
    3D Concrete Printing with Macro-Micro Robots
14. Che Yujun, Yang Huashan (2022-10)
    Hydration Products, Pore-Structure, and Compressive Strength of Extrusion-Based 3D Printed Cement-Pastes Containing Nano-Calcium-Carbonate
15. Miao Haibin, Guo Chao, Lu Zhengran, Chen Zhihua (2022-10)
    3D Meso-Scale-Analysis of Concrete Containing Defect Damages During Different Freeze-Thaw-Cycles
16. Patterson Albert, Vajipeyajula Bhaskar, Norris William (2022-10)
    System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems
17. Yang Rijiao, Zhu Yi, Lan Yan, Zeng Qiang et al. (2022-10)
    Differences in Micro Grain & Fiber-Distributions Between Matrix and Inter-Layer of Cementitious Filaments Affected by Extrusion-Molding
18. Frangez Valens, Taha Nizar, Feihl Nicolas, Lloret-Fritschi Ena et al. (2022-10)
    Geometric Feedback System for Robotic Spraying
19. Das Arnesh, Reiter Lex, Mantellato Sara, Flatt Robert (2022-10)
    Early-Age Rheology and Hydration-Control of Ternary Binders for 3D Printing Applications
20. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
    Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
21. Ibrahim Iman, Eltarabishi Fatma, Abdalla Hadeer, Abdallah Mohamed (2022-10)
    3D Printing in Sustainable Buildings:
    Systematic Review and Applications in the United Arab Emirates
22. Diwan Anushree, Patel Shiv, Pal Ankit, Dwivedi Ashutosh et al. (2022-10)
    Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction
23. Guanziroli Stefano, Marcucci Andrea, Negrini Alberto, Ferrara Liberato et al. (2022-10)
    A New Concept of Additive Manufacturing for the Regeneration of Existing Tunnels
24. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
    3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
    Printability, Mechanical Properties and Pore-Structure
25. Salandin Andrea, Quintana-Gallardo Alberto, Gómez-Lozano Vicente, Guillén-Guillamón Ignacio (2022-10)
    The First 3D Printed Building in Spain:
    A Study on Its Acoustic, Thermal and Environmental Performance
26. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
    Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
27. Estévez Alberto, Abdallah Yomna (2022-10)
    The New Standard Is Biodigital:
    Durable and Elastic 3D Printed Biodigital Clay Bricks
28. Mansouri Abraham, Binali Alreem, Aljawi Abdulla, Alhammadi Ahmed et al. (2022-10)
    Thermal Modeling of the Convective Heat-Transfer in the Large Air-Cavities of the 3D Concrete Printed Walls
29. Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
    3D Printed Geopolymer Composites:
    A Review
30. Chen Yu, Toosumran Nuttapon, Chehab Noura, Spanjers Henri et al. (2022-10)
    Feasibility Study of Using Desalination-Brine to Control the Stiffness and Early-Age Hydration of 3D Printable Cementitious Materials
31. Sun Bochao, Zeng Qiang, Wang Dianchao, Zhao Weijian (2022-10)
    Sustainable 3D Printed Mortar with CO2 Pretreated Recycled Fine Aggregates
32. Qu Zhengyao, Geng Guoqing (2022-10)
    Thermal Response Gelatin-Cement-Composite for 3D Concrete Printing
33. Xiao Jianzhuang, Duan Zhenhua (2022-10)
    Latest Development of 3D Printing Adopting Recycled Aggregate
34. Dey Dhrutiman, Panda Biranchi (2022-10)
    An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
35. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
    Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
36. Niranjan Y., Channabasavanna S., Krishnapillai Shankar, Velmurugan Ramachandran et al. (2022-10)
    The Unprecedented Role of 3D Printing Technology in Fighting the COVID-19 Pandemic:
    A Comprehensive Review