Wang Li¶

1. Sun Yuhang, Li Chuang, Liu Xiongfei, Wang Li et al. (2025-11)
   Enhancing Sulfate Resistance of Spray-Based 3D Printed Recycled Tunnel Slag Concrete Through Polypropylene Fiber Optimization
2. Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
   Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
   A Design Method for Printing-Friendly Structure
3. Wang Li, Fan Haichen, Wang Qiang, Bai Gang et al. (2025-09)
   Design Method and Force Transmission Mechanism of 3D Printed Concrete Truss Beams Reinforced with 3D Conical Reinforcement
4. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
   Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
5. Guan Jingyuan, Wang Li, Bai Gang, Ma Guowei (2025-06)
   Enhancing 3D Printed Formwork Columns via FRP Hoop Shear Connection Reinforcement
6. Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
   Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures
7. Zhang Ruo-Chen, Li Jiaxing, Liu Yiran, Huang Yimiao et al. (2025-06)
   Self-Healing Approach for Micro-Defects in 3D Printed Concrete:
   Microbial Community
8. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
   A (P)Review:
   Adhesion of Printcrete for Tunnel Structures
9. Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
   Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
10. Liu Xiongfei, Li Chuang, Guo Pei, Wang Li et al. (2025-02)
    Spray-Based 3D Printed Tunnel Slag Concrete:
    Evaluation for Printability and Mechanical Performance
11. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
    Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
12. Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
    Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks
13. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
    3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
    Design, Manufacturing, and Performance
14. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
    Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
15. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
    Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
    Experimental and Numerical Analysis
16. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
17. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
    Spray-Based 3D Printed Foam-Concrete:
    Cooperative Optimization for Lightweight and High-Strength Performance
18. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
    Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
19. Lin Xinbo, Shao Yajian, Ma Guowei, Wang Li (2024-05)
    A New 3D Printing Method and Similar Materials of the Tunnel-Lining for the Geomechanical Model-Test
20. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
    Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
21. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
    An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
22. Rui Aoyu, Wang Li, Lin Wenyu, Ma Guowei (2023-10)
    Experimental Study on Damage Anisotropy of 3D Printed Concrete Exposed to Sulfate-Attack
23. Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
    Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete
24. Bai Gang, Chen G., Li Rong, Wang Li et al. (2023-07)
    3D Printed Ultra-High-Performance Concrete:
    Preparation, Application, and Challenges
25. Zhang Dan, Ma Guowei, Guan Jingyuan, Wang Li et al. (2023-06)
    Cyclic Behavior of Unbonded Post-Tensioned Pre-Cast Segmental Concrete Columns Fabricated by 3D Printed Concrete Permanent Formwork
26. Yang Wenwei, Wang Li, Ma Guowei, Feng Peng (2023-06)
    An Integrated Method of Topological-Optimization and Path-Design for 3D Concrete Printing
27. Wang Li, Ye Kehan, Wan Qian, Li Zhijian et al. (2023-05)
    Inclined 3D Concrete Printing:
    Build-Up Prediction and Early-Age Performance-Optimization
28. Wan Qian, Yang Wenwei, Wang Li, Ma Guowei (2023-04)
    Global Continuous Path-Planning for 3D Concrete Printing Multi-Branched Structure
29. Wang Youyu, Ma Guowei, Wang Li, Zhang Wengang et al. (2023-04)
    Size-Effects in Cavern-Model-Tests Based on 3D Printing
30. Wang Li, Hu Yuanyuan, Wang Qiao, Cui Tianlong (2023-03)
    Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D Printed Mortar
31. Zhang Ruo-Chen, Wang Li, Xue Xuan, Ma Guowei (2023-02)
    Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment
32. Xia Lingwei, Bi Minghao, Wu Jie, Wang Fang et al. (2023-01)
    Integrated Lightweight Design-Method via Structural Optimization and Path-Planning for Material-Extrusion
33. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
    Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
34. Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
    Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
35. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
    U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
    A Novel Reinforcing Approach
36. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
    Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
37. Wang Li, Xiao Wei, Wang Qiao, Jiang Hailong et al. (2022-07)
    Freeze-Thaw-Resistance of 3D Printed Composites with Desert Sand
38. Wan Qian, Wang Li, Ma Guowei (2022-07)
    Continuous and Adaptable Printing Path Based on Transfinite Mapping for 3D Concrete Printing
39. Wang Li, Li Qiqi, Hu Yuanyuan, Cui Tianlong et al. (2022-07)
    Shrinkage and Cracking Properties of Cellulose-Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing
40. Ma Guowei, Bai Gang, Wang Li, Wang Fang (2022-07)
    Explosion-Resistance of 3D Printing Ultra-High-Performance Concrete Based on Contact-Explosion Tests
41. Bi Minghao, Xia Lingwei, Tran Jonathan, Li Zhi et al. (2022-04)
    Continuous Contour-Zigzag Hybrid Tool-Path for Large-Format Additive Manufacturing
42. Kazadi Billy, Yao Liang, Wang Li (2022-04)
    In-Process Reinforcement Method for 3D Concrete Printing:
    Status, Potentials and Challenges
43. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
    Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
44. Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
    Technology Readiness:
    A Global Snapshot of 3D Concrete Printing and the Frontiers for Development
45. Wang Li, Yang Yu, Yao Liang, Ma Guowei (2022-02)
    Interfacial Bonding Properties of 3D Printed Permanent Formwork with the Post-Casted Concrete
46. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
    3D Printable Aerogel-Incorporated Concrete:
    Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
47. Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
    Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing
48. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
    In-Process Reinforcing Method:
    Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
49. Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
    Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing
50. Wang Li, Ma Guowei, Liu Tianhao, Buswell Richard et al. (2021-07)
    Inter-Layer Reinforcement of 3D Printed Concrete by the In-Process Deposition of U-Nails
51. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
    Sustainable Materials for 3D Concrete Printing
52. Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
    Large-Scale 3D Printing Concrete Technology:
    Current Status and Future Opportunities
53. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-04)
    Importance and Potential of Cellulosic Materials and Derivatives in Extrusion-Based 3D Concrete Printing:
    Prospects and Challenges
54. Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
    Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
55. Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
    3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates
56. Liu Miao, Zhang Qiyun, Tan Zhendong, Wang Li et al. (2021-01)
    Investigation of Steel-Wire-Mesh-Reinforcement Method for 3D Concrete Printing
57. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-01)
    Weak Inter-Layer Bonding in Extrusion 3D Concrete Printing:
    A Comparative Analysis of Mitigation Techniques
58. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
    Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
59. Wan Qian, Wang Li, Ma Guowei (2020-07)
    Adaptable Tool-Path-Planning Method for 3D Concrete Printing Based on the Mapping Method
60. Wang Li, Tian Zehao, Ma Guowei, Zhang Mo (2020-02)
    Inter-Layer Bonding Improvement of 3D Printed Concrete with Polymer-Modified Mortar:
    Experiments and Molecular Dynamics Studies
61. Wang Li, Jiang Hailong, Li Zhijian, Ma Guowei (2020-02)
    Mechanical Behaviors of 3D Printed Lightweight Concrete Structure with Hollow Section
62. Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
    A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
63. Li Zhijian, Wang Li, Ma Guowei (2020-01)
    Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
64. Ma Guowei, Li Yanfeng, Wang Li, Zhang Junfei et al. (2020-01)
    Real-Time Quantification of Fresh and Hardened Mechanical Property for 3D Printing Material by Intellectualization with Piezoelectric Transducers
65. Li Zhijian, Wang Li, Ma Guowei (2019-02)
    Method for the Enhancement of Buildability and Bending-Resistance of Three-Dimensional-Printable Tailing Mortar
66. Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
    Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing
67. Ma Guowei, Li Zhijian, Wang Li, Bai Gang (2018-10)
    Micro-Cable-Reinforced Geopolymer Composite for Extrusion-Based 3D Printing
68. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
    Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
69. Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
    Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer
70. Li Zhijian, Wang Li, Ma Guowei (2018-05)
    Method for the Enhancement of Buildability and Bending-Resistance of 3D Printable Tailing Mortar
71. Ma Guowei, Li Zhijian, Wang Li (2017-12)
    Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing
72. Ma Guowei, Wang Li (2017-08)
    A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Large-Scale 3D Printing