Kruger Jacques¶

1. Mostert Jean-Pierre, Kruger Jacques (2025-10)
   Numerically Optimised Filament Surface Topology Towards Maximum Bond Strength in 3D Printed Concrete
2. Mostert Jean-Pierre, Kruger Jacques (2025-07)
   Reducing Anisotropic Behaviour of 3D Printed Concrete Through Interlocked Filaments
3. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Compressive Strength and Modulus of Elasticity:
   Mechanical Properties of 3D Printed Concrete
4. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
   Flexural and Tensile Strength:
   Mechanical Properties of 3D Printed Concrete
5. Haar Bjorn, Kruger Jacques, Zijl Gideon (2025-06)
   3D Printed Concrete Pinned Beam-Column Connection Development
6. Mostert Jean-Pierre, Kruger Jacques (2025-06)
   Improving Shear and Flexural Performance of Macroscale 3D Printed Concrete Beams Through Filament Interlocking
7. Munemo Rue, Kruger Jacques, Zijl Gideon (2025-05)
   Surface Treatment of 3DPC Interlayers with Silicate-Based Solution for Enhanced Interfacial Bonding
8. Günzel F., Moelich Gerrit, Kanyenze Simba, Kruger Jacques et al. (2024-11)
   Investigating Inherent Cement Setting Mechanisms to Improve the Constructability Performance of Extrusion-Based 3D Concrete Printing
9. Kruger Jacques, Zijl Gideon (2024-11)
   A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
   From Green to Solid State
10. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
    Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
11. Mostert Jean-Pierre, Kruger Jacques (2024-09)
    Improving Durability Performance of 3D Printed Concrete via Topological Interlocking of Layers
12. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
13. Haar Bjorn, Kruger Jacques, Zijl Gideon (2024-04)
    Off-Site 3D Printed Concrete Beam Design and Fabrication
14. Munemo Rue, Kruger Jacques, Zijl Gideon (2023-06)
    Improving Inter-Layer Bond in 3D Printed Concrete Through Induced Thermo-Hydrokinetics
15. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-06)
    A System-Development-Strategy of a Digital Construction for Building Frames
16. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
    Off-Site Construction with 3D Concrete Printing
17. Bester Frederick, Kruger Jacques, Zijl Gideon (2023-03)
    Rivet Reinforcement for Concrete Printing
18. Kruger Jacques, Westhuizen Jean-Pierré (2023-03)
    Investigating the Poisson Ratio of 3D Printed Concrete
19. Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
    The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
20. Cho Seung, Heever Marchant, Kruger Jacques, Zijl Gideon (2022-06)
    Proof of Concept:
    Sprayable SHCC Overlay Reinforcement Regime for Unreinforced 3D Printed Concrete Structure
21. Kruger Jacques, Mostert Jean-Pierre, Zijl Gideon (2022-06)
    A Strain-Based Constitutive Model Ensuring Aesthetic 3D Printed Concrete Structures:
    Limiting Differential Settlement of Filaments
22. Moelich Gerrit, Rensburg Johannes, Kruger Jacques, Combrinck Riaan (2022-06)
    The Environment’s Effect on the Inter-Layer Bond Strength of 3D Printed Concrete
23. Mostert Jean-Pierre, Kruger Jacques (2022-06)
    Interlocking 3D Printed Concrete Filaments Through Surface Topology Modifications for Improved Tensile Bond Strength
24. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
    Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures
25. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-04)
    A Plastic Shrinkage Cracking-Risk-Model for 3D Printed Concrete Exposed to Different Environments
26. Heever Marchant, Plessis Anton, Bester Frederick, Kruger Jacques et al. (2022-02)
    A Mechanistic Evaluation Relating Microstructural Morphology to a Modified Mohr-Griffith Compression-Shear Constitutive-Model for 3D Printed Concrete
27. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
    Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
28. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-12)
    Numerical Modelling-Strategies for Reinforced 3D Concrete Printed Elements
29. Kruger Jacques, Cho Seung, Bester Frederick, Rooyen Algurnon et al. (2021-11)
    Nano-Technology for Improved Three-Dimensional Concrete Printing Constructability
30. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
    Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture
31. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-07)
    Mechanical Characterisation for Numerical Simulation of Extrusion-Based 3D Concrete Printing
32. Bos Freek, Kruger Jacques, Lucas Sandra, Zijl Gideon (2021-04)
    Juxtaposing Fresh Material-Characterisation-Methods for Buildability-Assessment of 3D Printable Cementitious Mortars
33. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zijl Gideon (2021-03)
    Rheology and Application of Buoyant Foam-Concrete for Digital Fabrication
34. Kruger Jacques, Plessis Anton, Zijl Gideon (2020-12)
    An Investigation into the Porosity of Extrusion-Based 3D Printed Concrete
35. Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
    Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
    An Experimental Study
36. Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
    Reinforcing Digitally Fabricated Concrete:
    A Systems Approach Review
37. Kruger Jacques, Zijl Gideon (2020-10)
    A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication
38. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
    Plastic Shrinkage Cracking in 3D Printed Concrete
39. Bester Frederick, Heever Marchant, Kruger Jacques, Cho Seung et al. (2020-07)
    Steel-Fiber Links in 3D Printed Concrete
40. Cho Seung, Kruger Jacques, Bester Frederick, Heever Marchant et al. (2020-07)
    A Compendious Rheo-Mechanical Test for Printability-Assessment of 3D Printable Concrete
41. Heever Marchant, Bester Frederick, Pourbehi Mohammad, Kruger Jacques et al. (2020-07)
    Characterizing the Fissility of 3D Concrete Printed Elements via the Cohesive Zone Method
42. Kruger Jacques, Cicione Antonio, Bester Frederick, Heever Marchant et al. (2020-07)
    Facilitating Ductile Failure of 3D Printed Concrete Elements in Fire
43. Cicione Antonio, Kruger Jacques, Walls Richard, Zijl Gideon (2020-05)
    An Experimental Study of the Behavior of 3D Printed Concrete at Elevated Temperatures
44. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2020-04)
    A Rheology-Based Quasi-Static Shape-Retention-Model for Digitally Fabricated Concrete
45. Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
    On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites
46. Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
    3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
47. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zeranka Stephan et al. (2019-09)
    Rheology of 3D Printable Lightweight Foam-Concrete Incorporating Nano-Silica
48. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-09)
    Quantifying Constructability Performance of 3D Concrete Printing via Rheology-Based Analytical Models
49. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2019-09)
    Effect of Silicon-Carbide-Nano-Particles on 3D Printability of Cement-Based Materials
50. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
    An Ab-Inito Approach for Thixotropy Characterisation of Nano-Particle-Infused 3D Printable Concrete
51. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
    3D Concrete Printing:
    A Lower-Bound Analytical Model for Buildability-Performance-Quantification
52. Cho Seung, Kruger Jacques, Zeranka Stephan, Rooyen Algurnon et al. (2019-06)
    Mechanical Evaluation of 3D Printable Nano-Silica Incorporated Fiber-Reinforced Lightweight Foam-Concrete