2020-12¶

1. Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
   Biomimicry for 3D Concrete Printing:
   A Review and Perspective
2. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-12)
   Gravity-Induced Flow to Characterize Rheological Properties of Printable Cement-Based Materials
3. Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
   Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications
4. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
   3D Concrete Printing Sustainability:
   A Comparative Life Cycle Assessment of Four Construction Method Scenarios
5. Luhar Salmabanu, Suntharalingam Thadshajini, Navaratnam Satheeskumar, Luhar Ismail et al. (2020-12)
   Sustainable and Renewable Bio-Based Natural Fibers and Its Application for 3D Printed Concrete:
   A Review
6. Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
   A Review of 3D Printed Concrete:
   Performance-Requirements, Testing Measurements and Mix-Design
7. Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
   A 3D Concrete Printing Prefabrication Platform for Bespoke Columns
8. Antoni Antoni, Widjaya David, Wibowo Alexander, Chandra Jimmy et al. (2020-12)
   Using Calcium Oxide and Accelerator to Control the Initial Setting-Time of Mortar in 3D Concrete Printing
9. Gu Hai, Sun Jianhua, Zhang Jie, Xu Yuanyuan et al. (2020-12)
   Effect of Material-Ratio on the Performances in 3D Cement Printing and Its Optimization
10. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
    A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
11. Bohuchval Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2020-12)
    Effect of Metakaolin and Natural Fibers on Three-Dimensional Printing Mortar
12. Sepasgozar Samad, Shi Anqi, Yang Liming, Shirowzhan Sara et al. (2020-12)
    Additive Manufacturing Applications for Industry 4.0:
    A Systematic Critical Review
13. Kruger Jacques, Plessis Anton, Zijl Gideon (2020-12)
    An Investigation into the Porosity of Extrusion-Based 3D Printed Concrete
14. Vasilić Ksenija (2020-12)
    Additive Manufacturing in Concrete Construction:
    Current Status
15. Mohammed Alyaa, Saadi Nihad (2020-12)
    Ultra-High Early Strength Cementitious Grout Suitable for Additive Manufacturing Applications Fabricated by Using Graphene Oxide and Viscosity Modifying Agents
16. Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
    Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
    An Experimental Study
17. Putten Jolien, Snoeck Didier, Coensel R., Schutter Geert et al. (2020-12)
    Early-Age Shrinkage Phenomena of 3D Printed Cementitious Materials with Superabsorbent Polymers
18. Kaszyńska Maria, Skibicki Szymon, Hoffmann Marcin (2020-12)
    3D Concrete Printing for Sustainable Construction
19. Placzek Gerrit, Schwerdtner Patrick (2020-12)
    Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
20. Singh P., Sreerag K. (2020-12)
    Additive Manufacturing Through Digital Concrete by Extrusion- and Non-Extrusion-Method