Lesage Karel¶

1. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2025-06)
   Concrete Printing Through Lace Pressing:
   Head, Shoulders, Knees and Toes
2. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
   A (P)Review:
   Adhesion of Printcrete for Tunnel Structures
3. Vlieger Jentel, Cizer Özlem, Lesage Karel, Desplentere Frederik et al. (2024-11)
   Rheological- and Pumpability-Analysis of Sustainable 3D Printing Mortars Incorporating Recycled Sand
4. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2024-09)
   Zone-Based Analysis of Layer Deformation in 3D Concrete Printing:
   Shoulder, Steady-State, and Foot Zones
5. Zhan Yiyuan, Lesage Karel, Schutter Geert (2024-09)
   Mechanical Properties of 3D Printable Responsive Cement Mortar After Magnetic Intervention
6. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
   Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
7. Zhang Yiyuan, Tao Yaxin, Zhang Yi, Tittelboom Kim et al. (2024-04)
   Up-Scaling Active Rheology-Control to Cement-Mortar with the Intervention of an In-Line Magnetic Field
8. Miranda Luiza, Jovanović Balša, Lesage Karel, Schutter Geert (2023-10)
   Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective
9. Tao Yaxin, Lesage Karel, Schutter Geert, Tittelboom Kim (2023-04)
   Adhesion Studies in View of Automated Repair Using 3D Concrete Printing
10. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
    Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
    From Transportation to Fabrication
11. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
    Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
    Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
12. Miranda Luiza, Marchesini Flávio, Lesage Karel, Schutter Geert (2022-12)
    The Evolution of the Rheological Behavior of Hydrating Cement Systems:
    Combining Constitutive Modeling with Rheometry, Calorimetry and Mechanical Analyses
13. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
14. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2022-06)
    Using Limestone-Powder as a Carrier for the Accelerator in Extrusion-Based 3D Concrete Printing
15. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
    Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
16. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
    Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
17. Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
    Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings
18. Miranda Luiza, Lesage Karel, Schutter Geert (2021-09)
    Understanding the Structural Build-Up-Rate of Cementitious Materials for 3D Printing
19. Schryver Robin, Cheikh Khadija, Lesage Karel, Yardimci Mert et al. (2021-09)
    Numerical Reliability Study Based on Rheological Input for Bingham-Paste-Pumping Using a Finite Volume Approach in OpenFOAM
20. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
21. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2020-07)
    Effect of Limestone-Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
22. Schutter Geert, Lesage Karel (2018-09)
    Active Control of Properties of Concrete:
    A (P)Review
23. Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
    Vision of 3D Printing with Concrete:
    Technical, Economic and Environmental Potentials