Wangler Timothy¶

1. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
   Durability Assessment of 3D Printed Cement-Based Materials:
   A RILEM TC 304-ADC Interlaboratory Study
2. Tao Yaxin, Yuan Yong, Zhang Yi, Wangler Timothy (2025-06)
   Pore Structure Analysis of Printcrete Under Varying Temperature
3. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
   A (P)Review:
   Adhesion of Printcrete for Tunnel Structures
4. Gürel Şeyma, Chen Wei-Ting, Wangler Timothy, Lloret-Fritschi Ena et al. (2024-09)
   Scaling up in Digital Casting of Concrete:
   Towards Industry Integration
5. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
   Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
6. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
   Durability of 3D Printed Concrete:
   Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
7. Mahmoudi Matineh, Wangler Timothy, Flatt Robert (2024-09)
   Robustness of Digital Concrete:
   Effects of Temperature, Accelerator Type and Dosage
8. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
   Static Mixing for Set-on-Demand of Digital Concrete
9. Wangler Timothy, Patankar Yamini, Flatt Robert (2024-09)
   Sustainable Digital Concrete:
   Myth, Reality or Emerging Opportunity?
10. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
11. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
12. Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
    Aluminate 2K Systems in Digital Concrete:
    Process, Design, Chemistry, and Outlook
13. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
14. Anton Ana-Maria, Lin Che, Skevaki Eleni, Wang Mingyang et al. (2024-04)
    Tor Alva:
    A 3D Concrete Printed Tower
15. Wangler Timothy (2023-12)
    Opportunities and Future Perspectives
16. Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
    Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete
17. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
18. Das Arnesh, Aguilar Sanchez Asel, Wangler Timothy, Flatt Robert (2022-06)
    Freeze-Thaw-Performance of 3D Printed Concrete:
    Influence of Interfaces
19. Reiter Lex, Anton Ana-Maria, Wangler Timothy, Dillenburger Benjamin et al. (2022-06)
    A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites
20. Wangler Timothy, Aguilar Sanchez Asel, Anton Ana-Maria, Dillenburger Benjamin et al. (2022-06)
    Two Year Exposure of 3D Printed Cementitious Columns in a High-Alpine Environment
21. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
22. Flatt Robert, Wangler Timothy (2022-05)
    On Sustainability and Digital Fabrication with Concrete
23. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2022-04)
    Slow Penetration for Characterizing Concrete for Digital Fabrication
24. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
    Effect of Processing on the Air-Void System of 3D Printed Concrete
25. Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
    A Chemical Process Engineering Look at Digital Concrete Processes:
    Critical Step Design, In-Line Mixing, and Scale-Up
26. Aguilar Sanchez Asel, Wangler Timothy, Stefanoni Matteo, Angst Ueli (2022-02)
    Microstructural Examination of Carbonated 3D Printed Concrete
27. Boscaro Federica, Quadranti Elia, Wangler Timothy, Mantellato Sara et al. (2022-02)
    Eco-Friendly, Set-on-Demand Digital Concrete
28. Vasilić Ksenija, Hack Norman, Kloft Harald, Lowke Dirk et al. (2022-01)
    Digitale Fertigung im Betonbau
29. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
30. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
31. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
32. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
    Material-Informed Formwork Geometry:
    The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
33. Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
    A 3D Concrete Printing Prefabrication Platform for Bespoke Columns
34. Anton Ana-Maria, Bedarf Patrick, Yoo Angela, Dillenburger Benjamin et al. (2020-09)
    Concrete Choreography:
    Prefabrication of 3D Printed Columns
35. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
    Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete
36. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
    ACDC:
    The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
37. Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
    A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete
38. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
39. Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
    Setting-on-Demand for Digital Concrete:
    Principles, Measurements, Chemistry, Validation
40. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
    Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
    A Real-Scale Architectural Demonstrator
41. Anton Ana-Maria, Yoo Angela, Bedarf Patrick, Reiter Lex et al. (2019-10)
    Vertical Modulations
42. Das Arnesh, Reiter Lex, Wangler Timothy, Flatt Robert (2019-09)
    Hydration-Control of Ternary Cements for Digital Fabrication with Concrete
43. Wangler Timothy, Scotto Fabio, Lloret-Fritschi Ena, Flatt Robert (2019-09)
    Residence-Time-Distributions in Continuous Processing of Concrete
44. Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
    Additive Manufacturing Processes for Infrastructure Construction:
    A Review
45. Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
    Digital Concrete:
    A Review
46. Wangler Timothy (2018-11)
    Digital Concrete Processing:
    A Review
47. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
48. Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
    Potentials of Steel-Fibers for Mesh Mould Elements
49. Wangler Timothy, Flatt Robert (2018-09)
    Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication:
    Correction
50. Flatt Robert, Wangler Timothy (2018-08)
    Editorial for Special Issue on Digital Concrete
51. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
    The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete
52. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
    Potential Benefits of Digital Fabrication for Complex Structures:
    Environmental Assessment of a Robotically Fabricated Concrete Wall
53. Lloret-Fritschi Ena, Reiter Lex, Wangler Timothy, Gramazio Fabio et al. (2017-03)
    Smart Dynamic Casting:
    Slipforming with Flexible Formwork
54. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
    Digital Concrete:
    Opportunities and Challenges