Skip to content

2022-04

  1. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2022-04)
    Early-Age Buildability-Rheological Properties Relationship in Additively Manufactured Cement-Paste Hollow Cylinders
  2. Klyuev Sergey, Klyuev Alexander, Fediuk Roman, Ageeva Marina et al. (2022-04)
    Fresh and Mechanical Properties of Low-Cement Mortars for 3D Printing
  3. Mukhametrakhimov Rustem, Ziganshina Liliya (2022-04)
    Improvement of Technology and Quality-Control of 3DCP
  4. Keys Courtney, McCorkhill Noah, Lee Yoon-Si (2022-04)
    Investigation of Martian Concrete:
    Pumpability and Strength for Extraterrestrial 3D Printing
  5. Muthumanickam Naveen, Duarte José, Nazarian Shadi, Bilén Sven (2022-04)
    Metamodels for Rapid Analysis of Large Sets of Building Designs for Robotic Constructability:
    Technology Demonstration Using the NASA 3D Printed Mars Habitat Challenge
  6. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Burak (2022-04)
    A Comprehensive Review on Fresh State Rheological Properties of Extrusion-Mortars Designed for 3D Printing Applications
  7. Liu Huawei, Liu Chao, Bai Guoliang, Wu Yiwen et al. (2022-04)
    Influence of Pore-Defects on the Hardened Properties of 3D Printed Concrete with Coarse Aggregate
  8. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2022-04)
    3D Printing of Cement-Based Materials with Adapted Buildability
  9. Prem Prabhat, Ravichandran Darssni, Kaliyavaradhan Senthil, Ambily Parukutty (2022-04)
    Comparative Evaluation of Rheological Models for 3D Printable Concrete
  10. Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
    Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
  11. Wang Lining, Aslani Farhad, Mukherjee Abhijit (2022-04)
    Development of 3D Printable Self-Sensing Cementitious Composites
  12. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-04)
    D-Optimal Design of Experiments Applied to 3D High-Performance Concrete Printing Mix-Design
  13. Tan Yuan, Dahlenburg Maximilian, Fottner Johannes, Kessler Stephan (2022-04)
    Influencing Factors of the Mixing Performance of a Near-Nozzle Continuous Mixer for 3D Concrete Printing:
    An Analysis Based on Spatial-Lacey-Mixing-Index
  14. Lanwer Jan-Paul, Weigel Hendrik, Baghdadi Abtin, Empelmann Martin et al. (2022-04)
    Jointing Principles in AMC:
    Design and Preparation of Dry Joints
  15. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
    The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar
  16. Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
    Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
  17. Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
    Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction
  18. Bedarf Patrick, Szabó Anna, Zanini Michele, Heusi Alex et al. (2022-04)
    Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
  19. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
    Additive Formwork in Pre-Cast Construction:
    Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
  20. Wu Hao, Li Ziyan, Zhou Xinjie, Wu Xinyu et al. (2022-04)
    Digital Design and Fabrication of a 3D Concrete Printed Funicular Spatial Structure
  21. Park Min, Cheon Gain, Alemayehu Robel, Ju Young et al. (2022-04)
    Seismic Performance of F3D Free-Form Structures Using Small-Scale Shaking Table Tests
  22. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
    A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
  23. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
  24. Uhlík Adam, Buch Mário, Unčík Stanislav (2022-04)
    Effecting the Rheological Properties of Composites for 3D Printing Technology in Construction
  25. Wang Bolin, Yao Xiaofei, Yang Min, Zhang Runhong et al. (2022-04)
    Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions
  26. Bi Minghao, Xia Lingwei, Tran Jonathan, Li Zhi et al. (2022-04)
    Continuous Contour-Zigzag Hybrid Tool-Path for Large-Format Additive Manufacturing
  27. Huang Shuyi, Xu Weiguo, Li Yuqian (2022-04)
    The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms
  28. Liu Haoran, Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2022-04)
    Buildability Prediction of 3D Printed Concrete at Early-Ages:
    A Numerical Study with Drucker-Prager-Model
  29. Ziejewska Celina, Marczyk Joanna, Korniejenko Kinga, Bednarz Sebastian et al. (2022-04)
    3D Printing of Concrete-Geopolymer Hybrids
  30. Dillenburger Benjamin (2022-04)
    Additive Construction
  31. Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
    3D Printed Formwork for Concrete:
    State of the Art, Opportunities, Challenges, and Applications
  32. Ou Ya, Bao Ding, Zhu Guan-Qi, Luo Dan (2022-04)
    Additive Fabrication of Large-Scale Customizable Formwork Using Robotic Fiber-Reinforced Polymer Winding
  33. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2022-04)
    Slow Penetration for Characterizing Concrete for Digital Fabrication
  34. Rollakanti Chiranjeevi, Prasad C. (2022-04)
    Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
    A State of the Art Review
  35. Ruffray Nicolas, Reiter Lex, Flatt Robert (2022-04)
    Overcoming Environmental Stress-Cracking of FDM 3D Printed Formwork for Counter-Pressure Casting of Concrete
  36. Kazadi Billy, Yao Liang, Wang Li (2022-04)
    In-Process Reinforcement Method for 3D Concrete Printing:
    Status, Potentials and Challenges
  37. Li Weihong, Chen Xuhao, Li Nan (2022-04)
    3D Printing of Fast Setting Basalt Fiber-Reinforced Cement-Based Materials
  38. Wang Huan, Tian Xinchen, Wei Huixian, Dai Xueyan et al. (2022-04)
    Effects of Redispersible Latex-Powder on the Performance of 3D Printing Cementitious Materials
  39. Zhang Xinyue, Cui Weijiu, Qu Chengping, Wang Sheng et al. (2022-04)
    Discussion on Key Problems of 3D Printing Concrete in Coastal Environment
  40. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
    Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
  41. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
    Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
    Case Study Parque De Castilla Footbridge in Madrid
  42. Ignatova Elena, Kirichek Pavel (2022-04)
    Additive Manufacturing Based on Building Information-Model-Data
  43. Chen Yu, Chang Ze, He Shan, Çopuroğlu Oğuzhan et al. (2022-04)
    Effect of Curing Methods During a Long Time-Gap Between Two Printing Sessions on the Inter-Layer Bonding of 3D Printed Cementitious Materials
  44. Gimenez-Carbo Ester, Torres Raquel, Coll Hugo, Roig-Flores Marta et al. (2022-04)
    Preliminary Study of the Fresh and Hard Properties of UHPC That Is Used to Produce 3D Printed Mortar
  45. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
    Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
  46. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2022-04)
    A Grammar-Based Algorithm for Tool-Path-Generation:
    Compensating for Material-Deformation in the Additive Manufacturing of Concrete
  47. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
    3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
    A Review
  48. Kovaleva Daria, Nistler Maximilian, Blandini Lucio, Sobek Werner et al. (2022-04)
    Recyclable Sand Formwork:
    Towards Circular Production of Lightweight Concrete Structures
  49. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
    Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
    A Review
  50. Bhattacherjee Shantanu, Santhanam Manu (2022-04)
    Investigation on the Effect of Alkali-Free Aluminium Sulfate-Based Accelerator on the Fresh Properties of 3D Printable Concrete
  51. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
    Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
  52. Marchment Taylor, Sanjayan Jay (2022-04)
    Lap Joint Reinforcement for 3D Concrete Printing
  53. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
    Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
  54. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-04)
    A Plastic Shrinkage Cracking-Risk-Model for 3D Printed Concrete Exposed to Different Environments
  55. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
    Effect of Processing on the Air-Void System of 3D Printed Concrete
  56. Mo Yixin, Xing Jianchun, Yue Songlin, Zhang Yamei et al. (2022-04)
    Dynamic Properties of 3D Printed Cement Mortar Based on Split Hopkinson Pressure Bar Testing
  57. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
    Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability