Skip to content

2022-01

  1. Ayegba Blessing, Egbe King-James, Nazar Ali, Huang Mingzhi et al. (2022-01)
    Resource Efficiency and Thermal Comfort of 3D Printable Concrete Building Envelopes Optimized by Performance Enhancing Insulation:
    A Numerical Study
  2. Heidarnezhad Fatemeh, Zhang Qian (2022-01)
    Shotcrete-Based 3D Concrete Printing:
    State of Art, Challenges, and Opportunities
  3. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
    3D Printable Aerogel-Incorporated Concrete:
    Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
  4. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
  5. Feys Dimitri, Schutter Geert, Fataei Shirin, Martys Nicos et al. (2022-01)
    Pumping of Concrete:
    Understanding a Common Placement Method with Lots of Challenges
  6. M’Lahfi Basma, Amegouz Driss, Qandil Mostafa (2022-01)
    New Printable Concrete Formulation Based on Fibers from Doum Palm Leaflets for 3D Printing of Energy-Efficient Buildings
  7. Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
    A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction
  8. Vasilić Ksenija, Hack Norman, Kloft Harald, Lowke Dirk et al. (2022-01)
    Digitale Fertigung im Betonbau
  9. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
    Additive Manufacturing:
    A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
  10. Ismail Nur, Ibrahim Mustaffa, Abdullah Siti (2022-01)
    Compressive Strength of 3D Printing Bio-Composites Mortar
  11. Ding Tao, Qin Fei, Xiao Jianzhuang, Chen Xiaoming et al. (2022-01)
    Experimental Study on the Bond Behavior Between Steel-Bars and 3D Printed Concrete
  12. Gomaa Mohamed, Jabi Wassim, Soebarto Veronica, Xie Yi (2022-01)
    Digital Manufacturing for Earth Construction:
    A Critical Review
  13. Pastore Tommaso, Menna Costantino, Asprone Domenico (2022-01)
    Bézier-Based Biased Random-Key Genetic Algorithm to Address Printability-Constraints in the Topology-Optimization of Concrete Structures
  14. Ting Guan, Quah Tan, Lim Jian, Tay Yi et al. (2022-01)
    Extrudable Region Parametrical Study of 3D Printable Concrete Using Recycled-Glass Concrete
  15. Suntharalingam Thadshajini, Upasiri Irindu, Nagaratnam Brabha, Poologanathan Keerthan et al. (2022-01)
    Finite Element Modelling to Predict the Fire Performance of Bio-Inspired 3D Printed Concrete Wall Panels Exposed to Realistic Fire
  16. Shakor Pshtiwan, Chu Shaohua, Puzatova (nee Sharanova) Anastasiia, Dini Enrico (2022-01)
    Review of Binder-Jetting 3D Printing in the Construction Industry
  17. Xie Xiangyu, Zhang Lihai, Shi Caijun, Liu Xuemei (2022-01)
    Prediction of Lubrication-Layer Properties of Pumped Concrete Based on Flow-Induced Particle-Migration
  18. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
    3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
    Mixture Design and Mechanical Properties
  19. Cui Jinyang, He Zhen, Zhang Guozhi, Cai Xinhua (2022-01)
    Rheological Properties of Sprayable Ultra-High-Performance Concrete with Different Viscosity-Enhancing Agents
  20. Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
    Structural Design and Testing of Digitally Manufactured Concrete Structures
  21. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
  22. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
  23. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
    Properties and Testing of Printed Cement-Based Materials in Hardened State
  24. Roussel Nicolas, Lowke Dirk, Buswell Richard (2022-01)
    Digital Fabrication with Cement-Based Materials:
    The RILEM D.F.C. Technical Committee
  25. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
  26. Yang Huashan, Che Yujun (2022-01)
    Recycling of Aggregate Micro-Fines as a Partial Replacement for Fly-Ash in 3D Printing Cementitious Materials
  27. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Pedersen David et al. (2022-01)
    Numerical Predictions of Bottom-Layer-Stability in Material-Extrusion Additive Manufacturing
  28. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
    Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
  29. Pasco Jubert, Lei Zhen, Aranas Clodualdo (2022-01)
    Additive Manufacturing in Off-Site Construction:
    Review and Future Directions
  30. Sangiorgio Valentino, Parisi Fabio, Fieni Francesco, Parisi Nicola (2022-01)
    The New Boundaries of 3D-Printed Clay-Bricks-Design:
    Printability of Complex Internal Geometries
  31. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
    Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
  32. Geng Zifan, Wu Peipei, Pan Hao, Zheng Qi et al. (2022-01)
    Robust Layer Interface in Cement Additive Manufacturing via Silicate-Penetration and Precipitation
  33. Wu Zhengyu, Memari Ali, Duarte José (2022-01)
    State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete