Mata-Falcón Jaime¶

1. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
   Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
2. Ammann Rebecca, Gebhard Lukas, Thoma Karel, Mata-Falcón Jaime et al. (2024-09)
   Environmental Benefits of Concrete Floor Slabs Produced with Digitally Fabricated Formworks:
   A Case Study
3. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
   Enhancing Structural Efficiency with Digital Concrete:
   Principles, Opportunities and Case Studies
4. Mozaffari Salma, Kamravafar Rahasadat, Li Yunyan, Mata-Falcón Jaime et al. (2024-07)
   Leveraging Clay-Formwork 3D Printing for Reinforced-Concrete Construction
5. Mata-Falcón Jaime, Gebhard Lukas, Lee Minu, Bischof Patrick (2023-10)
   Advances in Structural Applications of Digital Fabrication With Concrete
6. Huber Tobias, Burger Joris, Mata-Falcón Jaime, Kaufmann Walter (2023-03)
   Structural Design and Testing of Material-Optimized Ribbed RC Slabs with 3D Printed Formwork
7. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
   Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
   A Case Study on Water Tanks
8. Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
   Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
9. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
   Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
10. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
11. Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
    Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
12. Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
    Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements
13. Bischof Patrick, Mata-Falcón Jaime, Burger Joris, Kaufmann Walter (2022-06)
    Digitally Fabricated Keyed Concrete Connections
14. Gebhard Lukas, Bischof Patrick, Anton Ana-Maria, Mata-Falcón Jaime et al. (2022-06)
    Pre-Installed Reinforcement for 3D Concrete Printing
15. Mirjan Ammar, Mata-Falcón Jaime, Rieger Carsten, Herkrath Janin et al. (2022-06)
    Mesh Mould Prefabrication
16. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
    Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
    Exploring Reinforcement-Strategies and Optimization
17. Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
    Structural Design and Testing of Digitally Manufactured Concrete Structures
18. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
    Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
19. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
    Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
20. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
    Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
21. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
    Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
    Ultra-Thin, 3D Printed Formwork
22. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
23. Lee Minu, Mata-Falcón Jaime, Popescu Mariana, Block Philippe et al. (2020-07)
    Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork
24. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
25. Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
    Eggshell:
    Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
26. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
    Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
27. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
    Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
    A Real-Scale Architectural Demonstrator
28. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
29. Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
    Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
30. Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
    Potentials of Steel-Fibers for Mesh Mould Elements
31. Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
    Rethinking Reinforcement for Digital Fabrication with Concrete